HP Cisco MDS 9222i Cisco MDS 9000 Family System Messages Reference (OL-15956-0
HP Cisco MDS 9222i - Multiservice Modular Fabric Switch Manual
View all HP Cisco MDS 9222i manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Cisco MDS 9222i manual content summary:
- HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 1
Send documentation comments to [email protected] Cisco MDS 9000 Family System Messages Reference Cisco MDS 9000 SAN-OS Release 3.3(1a) April 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS ( - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 2
DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY are trademarks; Changing the Way We Work, Live, Play, and Learn is a service mark; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 3
xvii Intelligent Storage Networking Services Configuration Guides xviii Troubleshooting and Reference xviii Installation and Problems in Cisco Products xx Obtaining Technical Assistance xxi Cisco Technical Support & Documentation Website xxi Submitting a Service Request xxi Definitions of Service - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 4
Contents Send documentation comments to [email protected] 2 C H A P T E R System Messages and Recovery Procedures for the Cisco MDS 9000 Family 2-1 AAA Messages 2-4 AAA-1 2-4 AAA-2 2-5 AAA-3 2-5 AAA-6 2-5 ACL Messages 2-5 ACL-2 2-6 ACL-4 2-8 ACL-5 2-8 ACL-6 2-8 ACLTCAM Messages 2-10 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 5
Contents Send documentation comments to [email protected] OL-15956-01 CIMSRVPROV-3 2-32 CIMSRVPROV-6 2-33 CLOUD Messages 2-33 CLOUD-2 2-33 CLOUD-3 2-34 CLOUD-6 2-34 CORE-DMON Messages 2-35 CORE-DMON-2 2-35 CREDIT MON Messages 2-35 DEBUGPROXY Messages 2-37 DEBUGPROXY-6 2-37 DEVICE-ALIAS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 6
Contents Send documentation comments to [email protected] FCC-2 2-65 FCC-5 2-66 FCC-6 2-67 FCC_LC Messages 2-67 FCC_LC-2 2-67 FCC_LC-5 2-68 FCC_LC-6 2-69 FCD Messages 2-69 FCD-7 2-69 FCDD Messages 2-69 FCDD-SLOT#-3 2-69 FCDD-SLOT#-4 2-70 FCDD-SLOT#-5 2-70 FCDD-SLOT#-7 2-71 FCDD_HELPER - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 7
Contents Send documentation comments to [email protected] OL-15956-01 FCNS-3 2-98 FCNS-6 2-99 FCS Messages 2-100 FCS-2 2-100 FCS-3 2-101 FCS-4 2-103 FCS-5 2-103 FCS-6 2-103 FCSP-MGR Messages 2-103 FCSP-MGR-2 2-104 FCSP-MGR-3 2-106 FCSP-MGR-6 2-106 FDMI Messages 2-106 FDMI-2 2-107 FDMI-3 2- - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 8
Contents Send documentation comments to [email protected] ILC_HELPER-6 2-125 ILC-SPAN Messages 2-125 ILC-SPAN-3 2-126 IMAGE_DNLD Messages 2-126 IMAGE_DNLD-SLOT#-2 2-126 IMAGE_DNLD-SLOT#-5 2-128 IMAGE_UPGRADE Messages 2-129 IMAGE_UPGRADE-SLOT#-2 2-129 IMAGE_UPGRADE-SLOT#-6 2-129 IPACL - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 9
Contents Send documentation comments to [email protected] OL-15956-01 IPsec-6 2-159 IPsec-7 2-160 ISAPI Messages 2-160 ISAPI-SLOT#-0 2-160 ISAPI-SLOT#-1 2-161 ISAPI-SLOT#-2 2-162 ISAPI-SLOT#-3 2-163 ISAPI-SLOT#-4 2-164 ISAPI-SLOT#-5 2-165 ISAPI-SLOT#-6 2-165 ISAPI-SLOT#-7 2-166 ISNS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 10
Contents Send documentation comments to [email protected] MCAST Messages 2-196 MCAST-2 2-196 MCAST-4 2-196 MCAST-5 2-196 MODULE Messages 2-197 MODULE-2 2-197 MODULE-3 2-200 MODULE-4 2-200 MODULE-5 2-201 MODULE-6 2-204 NASB Messages 2-204 NASB-SLOT#-5 2-204 NPC Messages 2-205 NPC-SLOT#-3 2- - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 11
Contents Send documentation comments to [email protected] OL-15956-01 PLOG_SUP-4 2-233 PORT Messages 2-233 PORT-3 2-233 PORT-5 2-233 PORT-Resources Messages 2-252 PORT-SECURITY Messages (Deprecated) 2-253 PORT-SECURITY-2 2-253 PORT-SECURITY-3 2-253 PORT-SECURITY-4 2-256 PORT-SECURITY-6 2- - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 12
Contents Send documentation comments to [email protected] RDL-6 2-283 RIB Messages 2-284 RIB-0 2-284 RIB-1 2-284 RIB-2 2-284 RIB-3 2-284 RIB-4 2-286 RIB-5 2-287 RIB-6 2-287 RLIR Messages 2-287 RLIR-2 2-287 RLIR-6 2-289 RM Messages 2-289 RM-6 2-289 RM-SLOT# Messages 2-289 RM-SLOT#-2 2-290 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 13
Contents Send documentation comments to [email protected] OL-15956-01 SENSOR-5 2-304 SENSOR_USD Messages 2-304 SENSOR_USD-2 2-304 SENSOR_USD-3 2-305 SENSOR_USD-5 2-306 SFC Messages 2-306 SFC-3 2-307 SFM Messages 2-307 SFM-2 2-307 SFM-6 2-307 SME_CPP Messages 2-307 SME_CPP-2 2-308 SME_CPP-3 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 14
Contents Send documentation comments to [email protected] SYSMGR-3 2-379 SYSMGR-4 2-386 SYSMGR-5 2-388 SYSMGR-6 2-394 SYSMGR-7 2-395 SYSTEMHEALTH Messages 2-397 SYSTEMHEALTH-2 2-397 SYSTEMHEALTH-4 2-401 SYSTEMHEALTH-5 2-409 SYSTEMHEALTH-6 2-411 TACACS Messages 2-414 TACACS-2 2-414 TACACS-3 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 15
Contents Send documentation comments to [email protected] OL-15956-01 VHBAD-3 2-431 VHBAD-7 2-433 VNI Messages 2-434 VNI-2 2-434 VNI-3 2-434 VNI-6 2-434 VOMD-SLOT Messages 2-435 VOMD-SLOT-2 2-435 VPM Messages 2-435 VPM-2 2-435 VPM-3 2-436 VPM-4 2-437 VPM-6 2-438 VPM-SLOT# Messages 2-441 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 16
Contents Send documentation comments to [email protected] WWN-4 2-455 WWN-5 2-456 WWN-6 2-456 WWN-7 2-458 XBAR Messages 2-459 XBAR-3 2-459 XBAR-5 2-459 XBAR_CLIENT Messages 2-462 XBAR_CLIENT-2 2-462 XBAR_CLIENT-3 2-463 ZONE Messages 2-464 ZONE-2 2-464 ZONE-3 2-473 ZONE-4 2-474 ZONE-5 2-476 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 17
changed features supported by messages Guide. New and Changed Features and Related System Messages Feature Description SYSTEMHEALTH Added messages for SYSTEMHEALTH feature. SME_CPP Added messages for SME_CPP. CFS,DPVM, DMM-SLOT#,IPS, ISAPI, NPV, RADIUS Added messages for CFS, IP services - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 18
,PORT, and RSCN. ILC_HELPER NASB New messages Supports intelligent linecard helper messages. Supports NASB messages.. Incremental messages added to IPSEC and DPVM. BIOS_DAEMON Supports BIOS_DAEMON messages. Cisco Fabric Services (CFS) Supports CFS messages. Changed in Release Where Documented - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 19
DSTATS messages. Internet Key Exchange (IKE) Supports IKE messages. IP security (IPSEC) Supports IPSEC messages. Resource Supports RM messages. management (RM) SFC Supports SFC messages. SCSI targets Supports SCSI-TARGET messages. VFC Supports VFC messages. Changed in Release Where - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 20
New and Changed Information Send documentation comments to [email protected] xxviii Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 21
the system messages for the Cisco MDS 9000 Family of directors and multilayer fabric switches. The system software sends these messages to the console . Audience This guide is for system administrators who are responsible for managing Cisco MDS 9000 Family switches and storage subsystems - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 22
these conventions: screen font Terminal sessions and information the switch displays are in screen font. boldface screen font Information you . Notes contain helpful suggestions or references to material not covered in the manual. Caution Means reader be careful. In this situation, you might do - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 23
Guide • Cisco MDS 9020 Fabric Switch Hardware Installation Guide Cisco Fabric Manager • Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide • Cisco MDS 9000 Family Fabric Manager Configuration Guide • Cisco MDS 9000 Fabric Manager Online Help • Cisco MDS 9000 Fabric Manager Web Services - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 24
Guide- For Cisco MDS 9500 and 9200 Series Troubleshooting and Reference • Cisco MDS 9000 Family Troubleshooting Guide • Cisco MDS 9000 Family MIB Quick Reference • Cisco MDS 9020 Fabric Switch . The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Cisco.com You can - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 25
library of technical product documentation on a portable medium. The DVD enables you to access multiple versions of installation, configuration, and command guides for Cisco hardware and software products. With the DVD, you have access to the same HTML documentation that is found on the Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 26
about how to subscribe to the PSIRT RSS feed is found at this URL: http://www.cisco.com/en/US/products/products_psirt_rss_feed.html Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 27
. If you do not have a valid Cisco service contract, contact your reseller. Cisco Technical Support & Documentation Website The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 28
cisco.com/techsupport/contacts Definitions of Service Request Severity To ensure that all service requests are reported in a standard • The Cisco Product Quick Reference Guide is a handy, compact reference tool as well as network deployment and troubleshooting tips, configuration examples, customer - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 29
access the Internet Protocol Journal at this URL: http://www.cisco.com/ipj • Networking products offered by Cisco Systems, as well as customer support services, can be obtained at this URL: http://www.cisco.com/en/US/products/index.html • Networking Professionals Connection is an interactive website - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 30
Preface Send documentation comments to [email protected] xxiv Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 31
are displayed in the following format (see ). Syslog Format On a Resident Switch The format for a resident syslog is: month dd hh:mm:ss -113 %PORT-3-IF_UNSUPPORTED_TRANSCEIVER: Transceiver for interface fc1/13 is not supported . Warning System Log Message Format Description Element month dd hh: - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 32
System Log Message Format Chapter 1 Introduction to System Messages for the Cisco MDS 9000 Family Send documentation comments to [email protected] Warning System Log Message Format Description (continued) Element severity MNEMONIC %$VSAN #%$ description Description Single-digit code - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 33
Alarm/event code= MOD_MINORSWFAIL Description of the problem= Module [dec] reported a failure in service [chars] [dec] is the module 09:50 fc1/13 is not supported . Table 1-3 System Log Message Format Description Element month dd hh:mm:ss IP-addr-switch facility severity MNEMONIC %$VSAN #%$ - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 34
=3 (notification) Alarm/event code= SYSTEM_MSG Description of the problem= Authpriv [dec] reported a failure in service [chars] [dec] is the module slot number associated with to the Cisco MDS 9000 Family CLI Configuration Guide and the Cisco MDS 9000 Family Cisco MDS 9000 Family System Messages Reference - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 35
for the Cisco MDS 9000 Family Capturing System Messages and History Send documentation comments to [email protected] Fabric Manager Configuration Guide). Only system messages that correspond to the configured logging level or higher severity messages are logged. As an example, if you set - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 36
Capturing System Messages and History Chapter 1 Introduction to System Messages for the Cisco MDS 9000 Family Send documentation comments to [email protected] Cisco MDS 9000 Family System Messages Reference 1-6 OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 37
Send documentation comments to [email protected] 2 C H A P T E R System Messages and Recovery Procedures for the Cisco MDS 9000 Family OL-15956-01 This chapter lists messages according to the same system facility that produces the messages. Messages are listed in alphabetical order, by - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 38
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] • EXCEPTIONLOG Messages, page 2-62 • FC-TUNNEL Messages, page 2-63 • FCC Messages, page 2-65 • FCC_LC Messages, page 2-67 • FCD Messages, page 2-69 • FCDD Messages - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 39
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] • LICMGR Messages, page 2-191 • MAC Messages, page 2-195 • MODULE Messages, page 2-197 • NASB Messages, page 2-204 • NPC Messages, page 2-205 • NPV Messages, page - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 40
for concurrent AAA sessions was reached. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Cisco MDS 9000 Family System Messages Reference 2-4 OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 41
of accounting log failed. [chars]. Explanation The accounting log could not be upgraded because of a problem with NVRAM. The problem is described in the error message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 42
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] ACL-2 Error Message ACL-2-ACL_HA_FAILURE: Failed to do high availability operation: [chars]. Explanation The high availability operation failed because of the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 43
MDS SAN-OS Release 1.2(2a). Error Message ACL-2-ACL_PSS_FAILURE: Failed to do PSS operation: [chars], reason: [hex]. Explanation The persistent storage service (PSS) operation failed because of the reason shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 44
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ACL-2-ACL_TCAM_FAILURE: Failed to do TCAM operation: [chars]. Explanation The ternary content addressable memory (TCAM) operation failed because of - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 45
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ACL-6-ACL_FCC_EVENT_STATUS: [chars] [chars]. Explanation This message reports the ACL Fibre Channel Congestion Control (FCC) event status. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 46
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ACL-6-ACL_SPAN_SRC_CONFIG_STATUS: [chars] [chars]. Explanation This message reports the ACL SPAN source - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 47
. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message ACLTCAM-2-ACL_TCAM_MTS_FAILURE: MTS operation failed: [chars]. Explanation The messaging and transaction service (MTS) operation failed because of the reason shown in the error message. Recommended Action No action is required. Introduced - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 48
[email protected] Error Message ACLTCAM-2-ACL_TCAM_MTS_REGISTRATION_FAILED: MTS registration failed for opCode: [dec]. Explanation The messaging and transaction service (MTS) registration failed for the reason shown in the error message. Recommended Action No action is required. Introduced - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 49
[chars], reason: [hex]. Explanation Failed to do a persistent storage service (PSS) operation because of the reason shown in the error message. error message. The error message also shows the error code for this problem. Recommended Action No action is required. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 50
BIOS on the module is write protected. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-14 Cisco MDS 9000 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 51
Support. Introduced Cisco MDS SAN-OS Release 3.0(1). BOOTVAR Messages This section contains the boot variable (BOOTVAR) messages. BOOTVAR-2 Error Message BOOTVAR-2-ALLOC_MEMORY: Memory allocation failed. Explanation The service failed to allocate memory. Recommended Action Check to see if the switch - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 52
the standby supervisor. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message BOOTVAR-3-INIT_FAILED: Initialization failed: Component [chars]. Explanation The service failed to start. The failure occurred during initialization of the component shown in the error message. Explanation Enter the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 53
Deprecated Cisco MDS SAN-OS Release 3.0(1). Error Message BOOTVAR-3-NEIGHBOR_REJECT_AUTOCOPY: auto-copy failed - not supported by neighbor supervisor. Explanation The standby supervisor does not support automatic copy. This automatic copy attempt has failed. Recommended Action No action is required - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 54
reboot. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message BOOTVAR-5-NEIGHBOR_UPDATE_AUTOCOPY: auto-copy supported by opposing supervisor, starting... Explanation The standby supervisor supports automatic copy. Automatic copy has started. Recommended Action No action is required. 2-18 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 55
action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message BOOTVAR-6-STARTING: Boot configuration initialized. Explanation The service has successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). CALLHOME Messages This section - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 56
for the failure of the CFS operation and rectify the problem. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message CALLHOME-3-CALLHOME_CFS_OPERATION_FAILED: [chars] : [chars]. Explanation The Call Home operation using Cisco Fabric Services (CFS) failed because of the reason shown in the error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 57
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message CALLHOME-3-MESSAGE_SIZE_EXCEED: message size for callhome alert:[chars] exceeds maximum limit for destination profile:[chars]. Explanation The - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 58
MDS SAN-OS Release 1.2(2a). Error Message CDP-3-MTSERROR: [chars]. Explanation The Cisco Discovery Protocol daemon encountered a messaging and transaction service (MTS) error. The error message shows the context where the error occurred. Recommended Action No action is required. Introduced Cisco MDS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 59
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message CDP-3-SOCKBINDFAIL: Failed to bind to raw socket, interface [hex] [chars]. Explanation The Cisco Discovery Protocol failed to bind to a raw socket. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 60
certificate enrollment exited. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message CERT_ENROLL - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 61
. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message CFS-2-CFS_REJECT: CFS reject: [chars]: Switch WWN [chars], reason [chars]. Explanation When Cisco Fabric Service (CFS) receives a malformed CFS packet from a switch with WWN and IP address shown in the error message, then CFS rejects the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 62
> CLI command. Introduced Cisco MDS SAN-OS Release 3.0(2a). Error Message CFS-2-MALLOC_ERROR: Size [dec] bytes. Explanation The Cisco Fabric Services could not allocate memory. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 63
SAN-OS Release 3.1(1). Error Message CFS-3-MERGE_FAILED: Merge failed for app [chars], local switch wwn [chars],ip [chars], remote switch wwn [chars], ip [chars]. Explanation The Cisco Fabric Services has detected a merge failure. Recommended Action No action is required. Introduced Cisco MDS SAN - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 64
comments to [email protected] Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS-3-GENERROR: [chars]. Explanation The Cisco Fabric Services encountered a general error, one that does not fall in any of the above categories. The error message describes the error and its context - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 65
[email protected] Introduced Cisco MDS SAN-OS Release 2.0(1b). CFS-4 Error Message CFS-4-LICEXP: [chars]. Explanation The Cisco Fabric Services license is going to expire. The error message shows the expiration time. Recommended Action Install a license. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 66
Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS-6-GENERAL_EVENT: [chars]. Explanation The Cisco Fabric Services generated an event. The description of the event is shown in the error message. Recommended Action No action is required. Introduced Cisco MDS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 67
chars]. Explanation [chars] is in logical scope. Regions are supported only physical scope applications. Recommended Action No action is required ). Error Message CFS-6-SWITCHOVER: Switching Over to other Sup. Explanation The Cisco Fabric Services successfully switched over to the standby supervisor. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 68
SAN-OS Release 1.3(1). Error Message CIMSRVPROV-2-CIM_SYSLOG_PSS_SNAPSHOT_ERR: Source URI:[chars] Destination URI:[chars] errcode:[dec]. Explanation A persistent storage service (PSS) snapshot error occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 69
Explanation The CIM server experienced a messaging and transaction service (MTS) message handling error. Recommended Action No action Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 70
CFS merge failed. Recommended Action Check the message for the reason for failure of the CFS operation and rectify the problem. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message CLOUD-3-CLOUD_CFS_OPERATION_FAILED: [chars] : [chars]. Explanation CFS operation failed. Recommended Action Check - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 71
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message CLOUD-6-CLOUD_DISCOVERY_STARTED: [chars] discovery started. Explanation Cloud-discovery started. Get more information using the cloud-discovery - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 72
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.0(1). 2-36 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 73
SSM debug proxy [chars] [dec]. Explanation General Storage Services Module (SSM) debug proxy information. Recommended Action No action Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 74
: [chars]. Explanation An error occurred while performing a Cisco Fabric Services (CFS) operation. The error message indicates the CFS operation and a remote switch was rejected. The error message indicates the reason for failure. Recommended Action If you purchased Cisco support through a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 75
Error Message DEVICE-ALIAS-3-LOCK_REJECTED: [chars]. Explanation Lock request received from a remote switch is rejected. The error message indicates the reason for the failure. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 76
service (PSS) operation. The error message indicates the persistent storage service (PSS) operation and the reason for failure. Recommended Action If you purchased Cisco support switch is rejected. The error message indicates the reason for failure. Recommended Action If you purchased Cisco support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 77
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message DEVICE-ALIAS-6-IMPORT_DEFINITION_CONFLICT: Fcalias [chars] could not be imported due to definition conflict. Explanation The fcalias shown could not - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 78
the additional information regarding failure. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 79
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] DMM-SLOT# Messages DMM-SLOT#-5 Error Message DMM-SLOT#-5-LOG_ERR_DMM_NEW_NPORT_SRVR_ZONE: Job Id:%Ld VSAN :[dec] New N-Port FCID :[hex] Server FCID:[hex] are in - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 80
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_ERROR: Job Id:%Ld NumSession:[dec]. Explanation Event indicating the suspension of data migration job. Recommended Action - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 81
[chars]. Explanation Memory allocation failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 82
from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message DPVM-3-DDAS_MODE_INVALID: [chars]. Explanation The Distributing Devise Alias Services (DDAS) mode is invalid when you merge two switches that have different device aliases. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 83
occurred during a dynamic port VSAN membership persistent storage service (PSS) operation. The error message indicates the persistent storage service (PSS) operation that caused the error. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 84
: pss create runtime database failed due to error: [hex]. Explanation DSTATS failed to create the persistent runtime database using the persistent storage service (PSS) because of the reason shown in the error message. Recommended Action Enter the show flash command or use a similar Fabric Manager - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 85
1b). Error Message DSTATS-3-PSS_MAX_KEY_FAIL: pss set runtime max key failed due to error: [hex]. Explanation DSTATS failed to set the persistent storage service (PSS) runtime max key because of the reason shown in the error message. Recommended Action Enter the show flash command or use a similar - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 86
DSTATS-3-PSS_STORE_FAIL: pss store runtime entry key:[hex] val:[hex] failed due to error: [hex]. Explanation DSTATS failed to store the persistent storage service (PSS) runtime entry key/value pair because of the reason shown in the error message. Recommended Action Enter the show flash command or - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 87
looped back to the same switch. Explanation The interface is looped back to another interface on the same switch. Recommended Action Check the connectivity procedure to determine which transceiver is being used. Contact customer support for a list of authorized transceiver vendors. Introduced Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 88
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ETHPORT-5-IF_DOWN_CHANNEL_ADMIN_DOWN: Interface [chars] is down (Channel admin down). Explanation This interface belongs to a PortChannel and the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 89
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ETHPORT-5-IF_DOWN_DOMAIN_MAX_RETRANSMISSION_FAILURE: Interface [chars] is down (Isolation due to domain manager other side not responding). - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 90
MDS SAN-OS Release 1.2(2a). Error Message ETHPORT-5-IF_DOWN_ESC_FAILURE_ISOLATION: Interface [chars] is down (Isolation due to ESC failure). Explanation Exchange switch parameters (ESC) failed on the interface. Recommended Action Check the output of show port internal event-history to show the ESC - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 91
port rxbbcredit). Explanation The configured receive BB_credit size is not supported. Recommended Action Get the allowed receive BB_credit size from show port rxbufsize). Explanation The configured receive buffer size is not supported. Recommended Action Get the allowed receive buffer size from show - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 92
[email protected] Error Message ETHPORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_SPEED: Interface [chars] is down (Error disabled - Incompatible admin port speed). Explanation The configured speed is not supported on this interface. Recommended Action Enter show port internal info to determine the range of speed - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 93
Message ETHPORT-5-IF_DOWN_LOOPBACK_ISOLATION: Interface [chars] is down (Isolation due to port loopback to same switch). Explanation The interface is looped back to another interface on the same switch. Recommended Action Check the connectivity of this interface and ensure that it is connected to - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 94
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ETHPORT-5-IF_DOWN_PEER_CLOSE: Interface [chars] is down(TCP conn. closed by peer). Explanation The FCIP peer connected to this interface closed the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 95
comments to [email protected] Error Message ETHPORT-5-IF_DOWN_SOFTWARE_FAILURE: Interface [chars] is down (Port software failure). Explanation The software servicing the data path on the port has failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 96
the interface is different from that of the PortChannel. Recommended Action Ensure that this interface is connected to the same remote switch as all the other interfaces in the PortChannel. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ETHPORT-5-IF_DOWN_TCP_KEEP_ALIVE_EXPIRED: Interface - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 97
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ETHPORT-5-IF_DOWN_TCP_MAX_RETRANSMIT: Interface [chars] is down(TCP conn. closed - retransmit failure). Explanation Interface is down due to a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 98
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ETHPORT-5-IF_DOWN_ZONE_REMOTE_NO_RESP_ISOLATION: Interface [chars] is down (Isolation due to remote zone server not responding). Explanation Isolated - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 99
transmission failed with error [dec]. Explanation FC MPLS tunnel process unsuccessfully tried to send a messaging and transaction service (MTS) message. The messaging and transaction service (MTS) error number is shown in the error message. Recommended Action No action is required. Introduced Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 100
Cisco MDS SAN-OS Release 1.2(2a). Error Message FC-TUNNEL-3-PSS_ERROR: PSS operation [chars] returned error: [hex]. Explanation A persistent storage service operation failed. The error message shows the context where the failure occurred and the error. Recommended Action No action is required - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 101
message, opcode [dec], is received. Explanation FC MPLS tunnel process received unexpected messaging and transaction service (MTS) event. The error message shows the messaging and transaction service (MTS) opcode. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 102
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCC-5 Error Message FCC-5-BAD_MSG: Received bad message: [chars]. Explanation The Fibre Channel Congestion Control process has received a malformed or - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 103
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.3(4a). FCC-6 Error Message FCC-5-STARTING: FCC process started. Explanation The Fibre Channel Congestion Control process - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 104
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message FCC_LC-2-UNABLE_READ_DATA: Unable to read fcc data ([chars]). Explanation Fibre Channel Congestion - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 105
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCC_LC-6 Error Message FCC_LC-6-PRIO_UPDATE: Updated enable priority to [dec]. Explanation The Fibre Channel Congestion Control line card process is active for - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 106
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCDD-SLOT#-4 Error Message FCDD-SLOT#-4-LOG_FCDD_WARNING: Warning!: [chars]. Explanation Serious errors that affect all normal operations occurred. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 107
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message FCDD-SLOT#-5-LOG_FCDD_VNO_FSM: [chars]. Explanation Illegal event received in VSAN normal operation finite state machine (FSM). Recommended Action No - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 108
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCDD_HELPER-SLOT#-5 Error Message FCDD_HELPER-SLOT#-5-LOG_FCDDH_DEBUG: Unexpected error: [chars]. Explanation Unexpected errors that affect some normal operations - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 109
have the same WWN and change one to a unique WWN. Then change the domain ID for one of the switches. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FCDOMAIN-2-EPORT_ALREADY_ISOLATED: Interface [chars] is down - VSAN [dec]. Explanation The domain manager was going to isolate the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 110
available at the moment. The switch might be short in memory or FCDOMAIN-2-FC2BIND_FAILED: Bind to FC2 Service failed. Explanation The domain manager support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 111
not available at the moment. The switch might be short in memory or some support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support Registration of opcodes with IPC Service failed. Explanation The domain - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 112
by fcdomain. Recommended Action Enter show fcdomain for all the switches in the affected VSAN. If a switch does not have a valid current domain ID, configure domain manager has not been able to contact the history debug service. Any problems occurring in the domain manager will not be logged to this - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 113
[email protected] Error Message FCDOMAIN-2-SYSBIND_FAILED: Bind to System Manager service failed. Explanation The domain manager has not been able to or domain ID list. Recommended Action Check the configuration on the remote switch, and make sure that the proposed allowed domains include the local - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 114
: IPC failure (sending of a message failed). Explanation The domain manager has not been able to send a message to the message transactional service (MTS). Recommended Action Execute a nondisruptive fcdomain restart in the affected VSAN. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 115
. Recommended Action Check the configuration of both the interfaces on the local switch; also check the interfaces on the other side of the corresponding links. domain manager feature has not been able to contact the debug service. Any problems occurring in the The domain manager feature will not be - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 116
Send documentation comments to [email protected] FCDOMAIN-4 Error Message FCDOMAIN-4-DM_ALLOWED_DM_LIST_MOD_ON_SUBORDINATE: Allowed domain list for vsan [dec] modified on subordinate switch with fcdomain distribution enabled. Explanation The allowed domai list was modified on a non-principal - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 117
free entries. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Error Message FCDOMAIN-5-PSWSSTARTED: Principal Switch Selection started - VSAN [dec]. Explanation The principal switch selection has started for the VSAN shown in the error message. Recommended Action No action is required - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 118
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 1.3(4a). Error Message FCDOMAIN-5-UNKNOWNDOMAININCFSDATAREQUEST: Received CFS Data - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 119
MDS SAN-OS Release 1.2(2a) Error Message FCDOMAIN-6-DOWNSTREAM_SWITCHED: Downstream interface has been fast-switched from [chars] to [chars]. Explanation The downstream interface has been fast-switched because of a link failure. Recommended Action No action is required. Introduced Cisco MDS SAN - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 120
A nondisruptive reconfiguration (BF phase) of the VSAN has started. This can happen when two or more fabrics merge, or when the user manually triggers a nondisruptive reconfiguration of the VSAN. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). 2-84 Cisco MDS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 121
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message FCDOMAIN-6-FABRICNAME_INVALID: Fabric name not available. Explanation Fabric name is not available. Recommended Action No action is required. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 122
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message FCDOMAIN-6-FCIDP_ENABLED_DOM_TYPE_PREFERRED: FCID persistency is enabled, but the domain ID type is configured as preferred. Explanation The FC ID - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 123
Cisco MDS SAN-OS Release 3.0(1). Error Message FCDOMAIN-6-MY_SAME_WWN_DIFFERENT_DOMS_CONFLICTS: During VSAN merge detected local WWN [chars] is already in use by another switch (the two switches have different domain IDs: [dec] (local) and [dec]). Explanation It has been detected that the local - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 124
Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message FCDOMAIN-6-NON_VIRTUAL_DOMS_CONFLICTS: During VSAN merge detected conflict between two switches having the same non-virtual domain ID [dec] and the same WWN [chars]. Explanation It has been detected that two - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 125
with same WWN [chars] and different non-virtual domain IDs [dec] and [dec]. Explanation Two switches have the same WWN but different non-virtual domain IDs. Recommended Action Check which switches have the same WWN and change either one. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 126
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message FCDOMAIN-6-VIRTUAL_IVR_DOMS_OVERLAPPING: During VSAN merge detected overlap with local virtual IVR domain ID [dec]. Explanation The VSAN merge - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 127
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-91 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 128
at least one FCID is still in use, preventing this purge from completely remove all entries belonging to the VSAN. Explanation There may be a problem in the sequence that shuts down all interfaces before fcdomain receives a request from FICON manager to purge the persistent FC ID table. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 129
Message FCDOMAIN-7-PSWSCOMPLETED: Principal Switch Selection completed (Fabric Name [chars]). Explanation The principal switch selection (PSwS phase) support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 130
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCFWD-4 FCFWD-6 Error Message FCFWD-4-WARNING: [chars]. Explanation FCFWD is generating a relevant notification. Recommended Action No action is required. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 131
Error Message FCMPLS-3-UNEXPECTED_MTS_MSG: Unexpected MTS message, 0x[dec], is received. Explanation FC MPLS process received unexpected messaging and transaction service (MTS) event. MTS opcode is specified in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 132
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCMPLS-5 Error Message FCMPLS-5-LDP_SES_ESTABLISHED: LDP session with [chars] is established. Explanation A new LDP session is established. Recommended Action No - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 133
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message FCMPLS-6-UNKNOWN_MSG_TYPE_RXED: Unknown LDP message type 0x[hex] is received from [chars]. Explanation LDP process received an unknown LDP message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 134
required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCNS-2-PSS_VERSION_MISMATCH: : for [chars]. Explanation Version mismatch for persistent storage service (PSS) for the type shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 135
action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). FCNS-6 Error Message FCNS-3-PSS_FAILURE: : [chars]. Explanation Persistent storage service (PSS) failure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCNS-6-DB_INFO: : [chars - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 136
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCS Messages This section contains the Fabric Configuration Server (FCS) messages. FCS-2 Error Message FCS-2-ALLOC_FAILED: Memory allocation failed for size:[dec]. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 137
dec]. Explanation There was a mismatch in the persistent storage services (PSS) version.The error message indicates the PSS service, its current version number, and the expected version. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 138
]. Explanation There was no response to a messaging and transaction service (MTS) request. The error message indicates details of the messaging and transaction service (MTS) message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 139
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCS-4 FCS-5 Error Message FCS-4-BAD_CT_FRAME: Invalid FCS frame: [chars] received from [hex]. Explanation An invalid FCS FC-CT frame with [chars] received from - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 140
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCSP-MGR-2 Error Message FCSP-MGR-2-ASSERT_FAILED: Code path reached unexpected location: assert might have been activated: File [chars] Line [dec]. Explanation - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 141
. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCSP-MGR-2-LICENSE_UNAVAILABLE: License:[chars] unavailable, service exiting. Explanation The license is unavailable. The FC-SP service will exit now. Recommended Action Install the license file to continue using the feature. Introduced - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 142
1.2(2a). FCSP-MGR-3 Error Message FCSP-MGR-2-PSS_INIT_FAILED: PSS Infrastructure Initialization failed ( [chars] ). Explanation The persistent storage services (PSS) infrastructure initialization failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 143
Interface (FDMI) process unsuccessfully tried to send a messaging and transaction service (MTS) message. MTS error number is specified in the error FDMI) process received malformed frame. The error message describes the problem. Recommended Action No action is required. Introduced Cisco MDS SAN - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 144
module that contains an unknown message format. The messaging and transaction service (MTS) opcode is specified in the error message. Recommended (FDMI) process sent an inter-switch packet to a switch and has not received the response. The domain ID for the switch is shown in the error message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 145
event. The messaging and transaction service (MTS) opcode is specified in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). FDMI-6 Error Message FDMI-4-SW_REJ_RESPONSE: Reject response [chars] from switch whose domain id is [dec]. Explanation - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 146
down: [chars]. Explanation FICON manager is shutting down. Recommended Action This is a severe error. Provide the reason given in the message to your customer service representative. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-110 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 147
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FICON-3 Error Message FICON-3-E_ASSIGN_BINDING_PN_FAIL: [chars]. Explanation Port number has FCIP or port channel binding that cannot be removed or changed. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 148
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message FICON-3-E_INVALID_PA_BRINGUP_FAIL: [chars]. Explanation This port either has an invalid port address assigned or has no port address assigned. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 149
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FICON-6 Error Message FICON-6-PDCM_CHANGE: VSAN [dec] port-address [dec] prohibit mask set to [chars]. Explanation The FICON prohibit dynamic connectivity mask ( - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 150
because of the reason shown in the error message. Recommended Action This is a severe problem. Provide the reason shown and the log files for Fabric Shortest Path First (FSPF) to your customer service representative. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-114 Cisco MDS 9000 Family System - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 151
indicates that the internal database is corrupted because of some memory corruption problem. Provide the output of show fspf database to your customer service representative. You may need to power cycle the switch. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FSPF-3-FC2_PROC_ERR: Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 152
of the the hello or dead interval on the switches on the two ends of the interface to see if of the debug fspf error command to your customer service representative. Introduced Cisco MDS SAN-OS Release 1.2(2a gaining lock. Explanation There is a problem with locking a shared resource between Fabric - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 153
command and RIB debug traces to your customer service representative. Introduced Cisco MDS SAN-OS Release 1.2( debug fspf route CLI commands if the problem is reproducible. Introduced Cisco MDS SAN-OS fspf all CLI command to your customer support representative. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 154
whether the VSAN is active and a valid domain is assigned on the switch. Also check if the IPC_PROC_ERR message is printed in the message logs fspf fc pkt CLI commands for the interfaces involved to your customer support representative. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FSPF - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 155
the LSU. Recommended Action This can occur in some transient situations. If the problem persists, provide the output of the show fspf VSAN [dec] interface and and debug fspf event VSAN [dec] commands to your customer support representative. Introduced Cisco MDS SAN-OS Release 1.2(2a). FSPF-6 Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 156
The LSR for the domain and VSAN shown in the error message reached the maximum age and will be deleted from all the connected switches. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FSPF-6-ROLLOVER: Rolling over the incarnation number of Local - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 157
the one in the database. This situation should only occur initially on a topology change. If the situation persists, the domain assignment of switches may not be unique. Recommended Action If this message is received continuously, check if the domain assignment is unique in the fabric. Introduced - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 158
configuration (error-id [hex]). Explanation The Internet Key Exchange (IKE) service failed to store the enable flag in the configuration. As a result support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 159
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IKE-3-PHASE1_PROPOSAL_MISMATCH: IKEv1: No matching phase 1 proposal found for peer [chars]. Explanation There is an Internet Key Exchange (IKE) - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 160
Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). IKE-6 Error Message IKE-4-UNSUPPORT: [chars] is not supported (message from [chars]). Explanation Internet Key Exchange (IKE) received something unsupported. Recommended Action No action is required. Introduced Cisco MDS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 161
therefore, the line card will be rebooted. Recommended Action Install the appropriate SSE license so you can use the Storage Services Module (SSM) features. Introduced Cisco MDS SAN-OS Release 2.1(1a). ILC_HELPER-3 Error Message ILC_HELPER-3-INVALID_BOOTVAR: Invalid [chars] boot variable configured - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 162
SPAN manager encountered an error. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). IMAGE_DNLD Messages This - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 163
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IMAGE_DNLD-SLOT#-2-ADDON_IMG_DNLD_SUCCESSFUL: Module image download process. [chars]. Explanation The add-on image download and install successful. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 164
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IMAGE_DNLD-SLOT#-2-IMG_DNLD_STARTED: Module image download process. [chars]. Explanation The image download started. The module image downloads are - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 165
IP-ACL caused a system failure. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 166
The IP access control list caused failures in other services. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 167
NOTE: [chars]. Explanation The IP access control list does not support this operation. Recommended Action Enter debug ipacl all, then recreate Action Check if the system is low on memory; if so reset the switch. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPCONF-3-FILE_WRITE_FAILED: - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 168
9000 Family Send documentation comments to [email protected] Error Message IPCONF-3-INIT_FAILED: Initialization failed. Component [chars]. Explanation The service failed to start. The failure is initializing the component shown in the error message. Recommended Action Enter show process to - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 169
Check if the system is low on memory and reset the switch if necessary. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPFC-3-INIT_FAILED: Initialization failed. Component [chars]. Explanation The service failed to start. The failure occurred while initializing the component shown - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 170
Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPFC-6-STARTING: IP Over Fiber Channel service started. Explanation The service successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPFC - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 171
of [chars] [chars]. Explanation The IP service (IPS) initialization failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 172
FCIP got an ERA 35. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-3-FCIP_FTA_ERA_38: ERA - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 173
. Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message IPS-3-ISLB_CFS_CLEAR_FAILED: [chars]. Explanation An - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 174
is listed in the message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). 2-138 Cisco MDS 9000 Family - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 175
failure is listed in the message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). OL-15956-01 Cisco MDS 9000 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 176
is listed in the message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). 2-140 Cisco MDS 9000 Family - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 177
iSLB zone set activation failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). IPS-4 Error Message IPS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 178
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IPS-4-FCIP_LICENSE_BIND_FAILED: Bind failed for [chars] due to [chars] for license failure; configuration accepted but bind failed. Explanation The - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 179
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-5-FCIP_FTA_DISBAND_GRP_CMD: Disband Group message processed PGID: [chars] CH FCID: [hex] CHI: [hex] - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 180
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-5-FCIP_FTA_RESIGN_GRP_CMD: Resign group processed for PGID: [chars] CH FCID: [hex] CHI: [hex] CU FCID - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 181
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IPS-5-FCIP_FTA_TURN_OFF_NONLAST_VSAN: FTA turned off for the Non-Last VSAN, [chars] VSAN: [hex]. Explanation FTA was turned off for the non-last Vsan - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 182
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IPS-5-FCIP_TA_CFG_MISMATCH: [chars]: Mismatch in FCIP Tape Acceleration configuration with peer. Explanation The FCIP tape acceleration configuration - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 183
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-5-ISCSI_CONN_DOWN_BATCH: [chars]: [dec] iSCSI sessions failed in last [chars], reason: [chars]. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 184
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IPS-5-ISCSI_SESSION_REDIRECT_TIMEOUT: iSCSI Session initiator [chars] to [chars] redirected to [chars] timeout. Explanation iSCSI session redirect - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 185
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IPS-5-ISCSI_PORT_FAILOVER: [chars]: iSCSI Explanation The Fibre Channel session for the iSCSI session failed over to newly active port. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 186
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IPS-5-SFRAME_FABRIC_WWN_MISMATCH: [chars]: special frame fabric wwn mismatch. Explanation A special frame was received, and the source or destination - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 187
Message IPS-7-ISNS_SVR_ERR_RESPONSE: isns server returned following error code on isns request for interface [chars] : [dec]. Explanation The Internet Storage Name Service (iSNS) server returned an error for a register or deregister request. For select error codes, the ISNS client would retry and re - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 188
Release 1.3(1). IPS_SB_MGR Messages This section contains the IP Storage services sibyte manager (IPS_SB_MGR) messages. IPS_SB_MGR-SLOT#-2 Error problem during the partitioning of the disk and creation of the file systems during the node install. Recommended Action If you purchased Cisco support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 189
#-2-SB1_REIMAGE_PREPARE_FAIL:Sibyte1 reimage disk formatting failed. Explanation There was a problem during the partitioning of the disk and the creation of file systems during reimage. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 190
image running on the line card. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(2a). 2-154 Cisco MDS 9000 Family - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 191
currently running on the node. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(2a). Error Message IPS_SB_MGR-SLOT - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 192
on image running on the line card. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 193
through to the sibyte manager. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 194
were dropped in the module. Explanation The 14/2-port Multiprotocol Services (14/2-MPS) module dropped packets. Recommended Action Enter the Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 195
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IPSEC-5-IPSEC_DISABLED_LIC_EXPIRED: IPSec Disabled due to License Expiry. Explanation IPsec is disabled because the license expired. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 196
. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). ISAPI Messages This section contains the intelligent switch application programming interface (ISAPI) messages. ISAPI-SLOT#-0 Error Message ISAPI-SLOT#-0-ILC_EMERG: [chars]. Explanation This is an intelligent - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 197
No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message ISAPI-SLOT#-0-SSM_EMERG: [chars]. Explanation This is an intelligent switch API emergency software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message ISAPI-SLOT - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 198
No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message ISAPI-SLOT#-1-SSM_ALERT: [chars]. Explanation This is an intelligent switch API alert software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message ISAPI-SLOT - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 199
9000 Family Send documentation comments to [email protected] Error Message ISAPI-SLOT#-2-SSM_CRIT: [chars]. Explanation This is an intelligent switch API critical software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message ISAPI-SLOT - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 200
required. Introduced Cisco MDS SAN-OS Release 2.1(1a). ISAPI-SLOT#-4 Error Message ISAPI-SLOT#-4-ILC_WARN: [chars]. Explanation This is an intelligent switch API warning software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ISAPI-SLOT - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 201
required. Introduced Cisco MDS SAN-OS Release 2.1(1a). ISAPI-SLOT#-6 Error Message ISAPI-SLOT#-6-ILC_INFO: [chars]. Explanation This is an intelligent switch API informational software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 202
required. Introduced Cisco MDS SAN-OS Release 2.1(1a). ISAPI-SLOT#-7 Error Message ISAPI-SLOT#-7-ILC_DEBUG: [chars]. Explanation This is an intelligent switch API debug software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ISAPI-SLOT - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 203
Name Service (ISNS) initialization failed. ISNS is automatically restarted. Recommended Action If you purchased Cisco support through flaps (enable and disable of the VSAN), link outages, switch restarts and so on, a CFS peer switch of IVR was lost. The current configuration changes would not - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 204
happen if the Network Address Translation (NAT) mode is modified without completely deactivating the active inter-VSAN routing (IVR) zone set. Recommended Action Reboot the switch. Introduced Cisco MDS SAN-OS Release 2.1(1a). 2-168 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 205
Guide or Cisco MDS 9000 Family Fabric Manager Configuration Guide for details on the domain range limitations. Recommended Action Change the domain of the switch available in that VSAN for assignment. Recommended Action Perform a manual build fabric using fcdomain's interface if you would like to - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 206
as shown in the error message. IVR-members connected to a third-party switch may not participate in IVR communications. It is likely that the domain requested shutting down. Recommended Action Install the appropriate license for IVR services and then enable IVR again. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 207
. Recommended Action Install the appropriate license for IVR services within the shown seconds to continue uninterrupted operation. virtual domain in the VSAN shown in the error message is native to different VSAN. This switch has learned of a device that is a member of the active IVR zone and has - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 208
dropped. Recommended Action If the problem persists, contact your support representative. If you purchased Cisco support through a Cisco reseller, contact chars]. Explanation AFID configuration is different at different IVR-enabled switches in the same VSAN. Recommended Action Change either the AFID - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 209
while committing the configuration. Configuration could not be committed on some switches. The reason for the failure is that the configuration is inconsistent in the fabric. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 210
present in the current active fabric binding database of those VSANs. Explanation This happens if FICON is enabled on VSANs and native switch of device with port WWN is not present in the current active fabric binding database of those VSANs. This is a requirement for FICON compliance. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 211
this interop mode. Refer to the Cisco MDS 9000 Family CLI Configuration Guide or Cisco MDS 9000 Family Fabric Manager Configuration Guide for details on the domain range limitations. Recommended Action Change the domain of the switch to which this IVR zone member is connected so that it is within - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 212
The reason for the failure is listed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-176 Cisco MDS 9000 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 213
from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IVR-3-MTS_ERROR: MTS message transmission failed with error [dec]. Explanation IVR process unsuccessfully tried to send a messaging and transaction service (MTS) message. The messaging and - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 214
shown in the message. Possible reasons are (a) number of AFID/VSAN combination is more than the maximum supported value of 128, or (b) number of IVR-enabled switches is more than the maximum supported value of 128. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 215
in the error message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IVR-3-VSAN_SEGMENTED - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 216
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] IVR-4 Error Message IVR-4-AUTO_TOPOLOGY_UPDATE_DISCARDED: [chars]. Explanation The auto-topology update is discarded because of conflicts. Recommended Action No - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 217
domain is [dec]. Explanation Could not determine the native VSAN of the currently advertised virtual domain in the VSAN shown in the error message. This switch has learned of a device that is a member of the active IVR zone, has the same domain ID, but belongs to another native VSAN.This device - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 218
is required. Introduced Cisco MDS SAN-OS Release 1.3(3). Error Message IVR-5-IVZS_WAITING_FOR_LOWEST_SWWN: Waiting for lowest switch WWN Inter-VSAN enabled switch in VSAN [dec]. Explanation This switch does not have the lowest switch world wide name (sWWN) in the VSAN. Only the inter-VSAN enabled - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 219
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IVR-5-IVZ_CLEANUP_DONE_BY_TIMER: Inter-VSAN clean-up is not done after waiting for 5 minutes. Explanation Inter-VSAN related configuration might not - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 220
[email protected] Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IVR-5-SERVICE_GROUP_ACTIVATED: Inter-VSAN Service Group has been activated. Explanation Inter-VSAN Service Group has been activated. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 221
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IVR-6-DRAV_CRITICAL_RETRY_EXCEED: [chars]. Explanation An attempt is being made to resend the DRAV FSM frames. The details are shown in the message. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 222
: [chars]. Explanation CFS request is received. The WWN of the switch that originated this request and the rr-token of the request are Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 223
port analyzer (LC-SPAN) messages. LC-SPAN-3 Error Message LC-SPAN-3-ERROR: [chars]. Explanation The line card switched port analyzer (LC-SPAN) manager encountered an error. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 224
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] LC_PORT_CHANNEL Messages This section contains the line card PortChannel (LC_PORT_CHANNEL) messages. LC_PORT_CHANNEL-SLOT#-0 Error Message LC_PORT_CHANNEL-SLOT#-0- - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 225
communications between two applications. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). LC_RDL Messages This - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 226
SAN-OS Release 1.3(4a). Error Message LC_RDL-3-SYSLOG_MTS_ERR: : [chars]. Explanation The line card remote domain lookup (LC_RDL) messaging and transaction service (MTS) errors occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). LC_RDL-6 Error Message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 227
for the exit is shown in the message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.1(1a). OL-15956-01 Cisco MDS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 228
Release 1.3(3). Error Message LICMGR-3-LOG_LICAPP_TOO_MANY_LIC: Only [dec] licenses are supported for [chars] feature, where as [dec] licenses are installed a supervisor card with licensed features for one switch is installed on another switch. Recommended Action No action is required. Introduced - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 229
a component running on the shown node and service access point (SAP). Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 230
Explanation The feature has an invalid license host ID. This can happen if a supervisor card with licensed features for one switch is installed on another switch. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 1.3(1). Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 231
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message LICMGR-6-LOG_LIC_LICENSE_CLEARED_ALL: Cleared all licenses. Explanation Cleared all license files. Recommended Action No action is required. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 232
. If the component cannot restart properly, contact your support representative. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 233
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] MODULE Messages This section contains the module messages. MODULE-2 Error Message MODULE-2-LCM_UPGRADE_DONE_GENERAL_FAIL: Upgrade ready message fails seq [dec]. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 234
. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message MODULE-2-MOD_MINORSWFAIL: Module [dec] reported a failure in service [chars]. Explanation A non-critical failure in the service occurred on the module. The module will not be restarted. Recommended Action Collect module information by - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 235
MDS SAN-OS Release 2.0(1b). Error Message MODULE-2-MOD_UNKNOWN: Module type [[dec]] in slot [dec] is not supported. Explanation The software card ID of module [dec] is not supported by the supervisor. Recommended Action Collect module information by entering the show module internal all module [dec - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 236
: Module [dec] firmware is not compatible with supervisor, downloading new image. Explanation The software version of the module is not supported by the supervisor module. Recommended Action Collect module information by entering the show module internal all module CLI command or by using - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 237
] is active. Explanation Module is ready to be configured and to switch traffic. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Module [dec] reported a failure in service [chars]. Explanation A non-critical failure caused by the service occurred in the module. The module will - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 238
2.0(1b). Error Message MODULE-5-MOD_OK: Module [dec] is online (serial: [chars]). Explanation Module named is ready to be configured and to switch traffic. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message MODULE-5-MOD_OK: Module [dec] is online - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 239
OL-15956-01 Error Message MODULE-5-XBAR_OK: Xbar [dec] is online (serial: [chars]). Explanation Xbar is ready to be configured and to switch traffic. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message MODULE-5-XBAR_REINIT: Re-initializing xbar [dec - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 240
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] MODULE-6 Error Message MODULE-6-MOD_PURGE_CONFIG: Purging the configuration for module [dec]. Explanation Notification is sent to remove module configurations. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 241
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message NASB-SLOT#-5-LOG_ERR_TPC_VT_DESTROYED: VSAN :[dec] Virtual Target : [chars] Deleted. Explanation The virtual target in the associated VSAN is being - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 242
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] NPC-SLOT#-5 Error Message NPC-SLOT#-5-LOG_NPC_DEBUG: Unexpected error: [chars]. Explanation Unexpected errors occurred that affect some normal operations. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 243
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.2(1). NPV-3 Error Message NPV-3-ACL_UPDATE_FAILED Explanation ACL update request initiated by the NPV process has failed. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 244
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message NPV-3-LS_RJT_RCVD: [chars]. Explanation NPV process received an LS_RJT frame. Recommended Action No action is required. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 245
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.2(1). NPV-5 Following are notification-level NPV system log messages: NPV-6 Error Message NPV-5-ASSERTION_FAILED - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 246
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message NPV-6-FDISC_SENT Explanation NPV process sent an FDISC frame. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 247
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message NPV-6-MTS_REQ_RCVD Explanation NPV process received an MTS request. Recommended Action No action is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 248
Send documentation comments to [email protected] Error Message NPV-6-SERVER_PROXY_LOGO_SENT Explanation NPV process sent a LOGO frame to core switch. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). NTP Messages This section contains the Network Time - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 249
MDS SAN-OS Release 1.2(2a). NTP-6 Error Message NTP-3-NTP_SYSLOG_MTS_ERR: : [chars]. Explanation Network Time Protocol (NTP) messaging and transaction service (MTS) error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message NTP-6-NTP_SYSLOG_CREATED - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 250
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] NVP Messages This section contains the virtual N port (NVP) messages. NVP-6 Error Message NVP-6-NVP_INFO: [chars]. Explanation virtual N port (NVP) daemon - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 251
. Recommended Action Replace the failed clock module. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message PLATFORM-0-CHASSIS_CLKSWRESET: Switch reset due to clock switch. Explanation Chassis clock source has failed and system will be reset. System will automatically start using the redundant - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 252
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PLATFORM-0-FAIL_REMOVED: Fan module removed before [dec] seconds. Explanation Fan module was removed. This could lead to temperature alarms. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 253
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PLATFORM-0-SYS_LC_DRIVER_LOAD_FAILED: Failed to load linecard module drivers. Explanation Failed while trying to load drivers. Recommended Action - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 254
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-0-XBAR_CARD_CLK_FAIL: Xbar card in slot:[dec] (Serial number [chars]) encountered clock failure - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 255
CLI command or by using a similar Fabric Manager/Device Manager procedure. Refer to power supply documentation in the relevant hardware installation guide to learn how to increase power supply capacity. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-1-MDS9124_FAN_FAIL: Less than - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 256
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message PLATFORM-2-CASA_FAN_OK: Fan module [dec] ok. Explanation Fan module indicated is ok. Recommended Action - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 257
collect more information if you suspect a module has been powered down because of errors. At least one exbar module has to be up for switch modules to function. Introduced Cisco MDS SAN-OS Release 3.0(1).' Error Message PLATFORM-2-MOD_PWRDENY: Module [dec] can not be powered up due to insufficient - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 258
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PLATFORM-2-MOD_PWRIDPROMFAIL: Module [dec] failed to power up due to IDPROM read error. Explanation The module cannot be powered up because of IDPROM - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 259
bootflash in the module and try again. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-2-PFM_LC_MOD_POWERED_DOWN: Module [dec] Powered Down. Module is not supported in this chassis. (Chassis Incompatible card). Explanation Module has been powered down because the card is not - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 260
result in unexplained behaviour. Recommended Action Upgrade the power managment EPLD. Refer to the Cisco MDS 9000 Family CLI Configuration Guide. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message PLATFORM-2-PFM_STDBY_POWERUP_FAIL: standby supervisor failed to power up. Explanation Standby - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 261
to have same capacity for both powersupplies otherwise it may cause service disruptions. Explanation Detected a power supply that has a different . See the power supply documentation in the relevant hardware installation guide to learn more on increasing or decreasing power supply capacity and - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 262
the system and can cause service disruptions (Serial No. [ be faulty. Contact your customer support representative to replace the unit for CISCO MDS 9500/9200 Multilayer Switches ((Serial number[chars]). Explanation Unable appropriate product hardware installation guide for information on increasing - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 263
(Serial number [chars]). Explanation This power supply is not supported for the Cisco MDS 9500 or 9200 series of switches. Recommended Action Refer to the appropriate product hardware installation guide for information on increasing or decreasing power supply capacity and configuring power supplies - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 264
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PLATFORM-3-MOD_PWRIDPROMFAIL: Module [dec] failed to power up due to idprom read error. Explanation The module cannot be powered up because of an - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 265
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] PLATFORM-5 Error Message PLATFORM-5-CHASSIS_CLKMODOK: Chassis clock module [dec] ok. Explanation Clock module on chassis is functioning properly. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 266
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-5-MOD_REMOVE: Module [dec] removed (Serial No. [chars]). Explanation The module has been - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 267
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PLATFORM-5-PS_FANOK: Fan in Power supply [dec] ok. Explanation Fan module in the named power supply is operating normally. Recommended Action No - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 268
No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). PLATFORM-7 Error Message PLATFORM-7-PFM_CLOCK_UPD_FAIL: Clock update failed due to context-switch delay of [dec] msec. Explanation System will shut down in seconds because of a clock update failure. Recommended Action Enter the show - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 269
command or use a similar Fabric Manager/Device Manager procedure to determine the transceiver being used. Contact your customer support representative for a list of authorized transceiver vendors. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-EC_DISABLED_AS_LICENSE_NOT_PRESENT - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 270
MDS SAN-OS Release 1.3(1). Error Message PORT-5-IF_DOWN_BUNDLE_MISCFG: Interface [chars] is down (Isolation due to channel mis-configuration on local or remote switch). Explanation One port across a link is part of a PortChannel while the other is not. Recommended Action While adding or deleting - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 271
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-5-IF_DOWN_CHANNEL_ADMIN_DOWN: Interface [chars] is down (Channel admin down). Explanation This interface belongs to a PortChannel and the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 272
PORT-5-IF_DOWN_DPVM_VSAN_NOT_FOUND: Interface [chars] is down (dynamic vsan not present). Explanation The specified dynamic VSAN is not configured on this switch. Recommended Action Configure the dynamic VSAN. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-236 Cisco MDS 9000 Family System Messages - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 273
port name). Explanation Exchange link parameter (ELP) failed on the interface because of an invalid port name. Recommended Action Configure the attached switch port correctly and try again. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 274
: revision mismatch). Explanation Exchange link parameter (ELP) failed on the interface because of a revision mismatch. Recommended Action Configure the attached switch port correctly and try again. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-238 Cisco MDS 9000 Family System Messages Reference - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 275
MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_ESC_FAILURE_ISOLATION: Interface [chars] is down (Isolation due to ESC failure). Explanation Exchange switch parameter (ESC) failed on the interface. Recommended Action Enter the show port internal event-history CLI command or use a similar - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 276
: Interface [chars] is down (Error disabled - Fcot vendor not supported). Explanation The Fibre Channel optical transceiver inserted is not a supported one. Recommended Action Contact your customer support representative for a list of authorized transceiver (SFP) vendors. Introduced Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 277
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-5-IF_DOWN_FCSP_AUTHENT_FAILURE: Interface [chars] is down (FC-SP authentication failure). Explanation The port failed Fibre Channel Security - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 278
Action Enter the show port internal info command or use a similar Fabric Manager procedure to determine the list of modes supported on this interface. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_RXBBCREDIT: Interface [chars] is down (Error disabled - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 279
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-5-IF_DOWN_INTERFACE_REMOVED: Interface [chars] is down (Interface removed). Explanation Interface was removed. Recommended Action No action is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 280
Error Message PORT-5-IF_DOWN_LOOPBACK_ISOLATION: Interface [chars] is down (Isolation due to port loopback to same switch). Explanation The interface is looped back to another interface on the same switch. Recommended Action Check the connectivity of this interface and ensure that it is connected to - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 281
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-5-IF_DOWN_NOS_RCVD: Interface [chars] is down (NOS received). Explanation The physical link has gone down. Recommended Action Ensure that the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 282
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-5-IF_DOWN_PEER_CLOSE: Interface [chars] is down(TCP conn. closed by peer). Explanation The FCIP peer connected to this interface closed the TCP - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 283
Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_SOFTWARE_FAILURE: Interface [chars] is down (Port software failure). Explanation The software servicing the data path on the port has failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 284
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-5-IF_DOWN_SRC_PORT_NOT_BOUND: Interface [chars] is down (Tunnel port src interface unbound). Explanation The FCIP link port source interface is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 285
of the interface is different from that of the PortChannel. Recommended Action Ensure that this interface is connected to the same remote switch as all the other interfaces in the PortChannel. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_TCP_KEEP_ALIVE_EXPIRED: Interface - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 286
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-5-IF_DOWN_TOO_MANY_INVALID_FLOGIS: Interface [chars] is down(Suspended due to too many invalid flogis. Explanation The port is suspended because - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 287
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_ZONE_REMOTE_NO_RESP_ISOLATION: Interface [chars] is down (Isolation due to remote zone - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 288
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-5-MODULE_BRINGUP_NOT_ALLOWED: Not allowing module [dec] to come up for reason: [chars] ([hex]). Explanation Module is not allowed to be - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 289
size shown in the error message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 290
error. Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message PORT-SECURITY-3-DB_ERR: [chars]. Explanation An - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 291
-3-MTS_ERR: [chars]. Explanation An error occurred in processing a messaging and transaction services (MTS) message. The error message indicates the error that occurred. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 292
dec]. Explanation There was a mismatch in the persistent storage service (PSS) version. The error message indicates the PSS service, its current version number, and the expected version. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 293
the problem persists, contact your customer support switch if necessary. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT_CHANNEL-1-MAP_PARAM_FAILURE: mapping parameter failed for [chars] [[chars]]. Explanation Parameter mapping failed. Recommended Action The specified service - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 294
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] PORT_CHANNEL-2 Error Message PORT_CHANNEL-2-RESET_MODULE: reset module [dec] for not responding or returning error. Explanation A module is reset for not - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 295
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT_CHANNEL-3-TIMEOUT: timed out after [dec] seconds [type [chars], state [chars]]. Explanation Some operation timed out. Recommended Action Execute - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 296
MAX_CHANNEL_DISALLOWED: Module failed to come online because port channel interface - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 297
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT_CHANNEL-5-PORT_ADDED: [chars] added to [chars]. Explanation Ports were added to a PortChannel. Recommended Action No action is required. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 298
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT_CHANNEL-7-GSYNC_REQ: requesting global synchronization. Explanation PortChannel manager requested a global synchronization from the active - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 299
Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. can be used with activation to prevent this. This violating device or switch will be logged out. Introduced Cisco MDS SAN-OS Release 1.3(4a). - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 300
indicates the reason for failure. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(4a). 2-264 Cisco MDS 9000 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 301
dec]. Explanation There was a mismatch in the persistent storage service (PSS) version. The error message indicates the PSS service, its current version number, and the expected version. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 302
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT_SECURITY-6-INFO: [chars]. Explanation An event happened that affects the port security manager. The error message indicates the event. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 303
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PROC_MGR-SLOT#-2-PROC_MGR_COMP_DEP_FAIL: ERROR: Dependency failure Component ([chars]) depends on ([chars]). Explanation Component dependency failure - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 304
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PROC_MGR-SLOT#-2-PROC_MGR_QUIT: Process manager quitting because: [chars]. Explanation Process manager is quitting. Recommended Action No action is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 305
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PROC_MGR-SLOT#-2-PROC_MGR_UT_SEM_GET_FAIL: ERROR:[chars] [dec]: Failed to get utaker semaphore: [dec]. Explanation Utaker semaphore get failed. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 306
needs more working pages. Explanation Service needs more working page buffers. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 307
[email protected] Error Message PSS-0-PSS_WRITE_DATA_FAILURE: [chars]: failed to write data to [chars] block [dec]: [chars]. Explanation The persistent storage service cannot write data because of a file system or disk error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 308
or use a similar Fabric Manager procedure as a last recourse to clear this problem. Introduced Cisco MDS SAN-OS Release 1.2(2a). PSS-2 Error Message PSS-2- : [chars]: cleaning up [chars]. Explanation The persistent storage service removed a leftover or corrupted file. Recommended Action No action - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 309
is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PSS-5-PSS_SHRINK: [chars]: shrinking pss: [chars]. Explanation The persistent storage service is being reduced to remove free space. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). OL - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 310
[email protected] QOS Messages This section contains the quality of service (QOS) messages. QOS-2 Error Message QOS-2-EXITING: Exit reason Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 311
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message QOS-2-STDOUT_ROTATE_FAILURE: Failed to rotate stdout file: [chars]. Explanation The QoS manager has failed to rotate its current standard output file - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 312
is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message QOS-3-MTSERROR: [chars]. Explanation QoS manager encountered a messaging and transaction service (MTS) error. The error message specifies the context where the error occurred. Recommended Action No action is required. Introduced - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 313
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message QOS-3-UNKNOWN_MSG: Received from Node=[dec] SAP=[dec]. Explanation The QoS manager has received an unknown message from the node and sap shown in the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 314
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message QOS-6-DISABLED_UP_MARKING: [chars]. Explanation The QoS manager has disabled marking of time-critical control traffic as high-priority traffic. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 315
Explanation The QoS manager is up and ready to accept client requests The service was initialized in the mode shown in the error message. Recommended Action Error Message QOS-6-SWITCHOVER: Switching Over to other Supervisor. Explanation The QoS manager has successfully switched over to the standby - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 316
This section contains the Remote Authentication Dial-In User Service (RADIUS) messages. RADIUS-2 RADIUS-3 Error Message RADIUS-2-RADIUS_NO_AUTHEN_INFO: ASCII authentication not supported. Explanation ASCII authentication not supported. Recommended Action Please contact the Cisco reseller through - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 317
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message RADIUS-6-RADIUS_MESSAGE: [chars]. Explanation RADIUS message. Recommended Action No action is required. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 318
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] RDL Messages This section contains the remote domain lookup (RDL) messages. RDL-3 Error Message RDL-3-SYSLOG_ALLOC_FAIL: : [chars]. Explanation The remote domain - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 319
to [email protected] Error Message RDL-3-SYSLOG_MTS_ERR: : [chars]. Explanation The remote domain lookup (RDL) messaging and transaction service (MTS) errors. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). RDL-6 Error Message RDL-6-SYSLOG_DEBUG_1 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 320
Information Base (RIB) caused failures in other services. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 321
, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message RIB-3-MISS_APPS: Missing response from service. Explanation Service not responding to the Routing Information Base (RIB - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 322
Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). RIB-4 Error Message RIB-4-CPU_HOG: Inactive or busy. Explanation Either the Routing Information Base (RIB) was not scheduled to run, or RIB was busy, and RIB did not service the message or timer queue for - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 323
Cisco MDS SAN-OS Release 1.2(2a). RIB-5 RIB-6 Error Message RIB-5-NOTE: [chars]. Explanation The Routing Information Base (RIB) does not support this operation. Recommended Action Enter the debug rib all command, or use a similar Fabric Manager procedure, then recreate the operation scenario to - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 324
Message RLIR-2-MTS_FAILED: RLIR MTS operation failed: [chars]: [chars]. Explanation Registered Link Incident Record (RLIR) messaging and transaction service (MTS) operation failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message RLIR-2-PSS_FAILED - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 325
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] RLIR-6 Error Message RLIR-6-SYSLOG_INFO: RLIR Syslog info: [chars]. Explanation Registered Link Incident Record (RLIR) syslog info. Recommended Action No action is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 326
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] RM-SLOT#-2 Error Message RM-SLOT#-2-CPP_CATASTROPHIC_ERROR: ERROR: Component ([chars]) caused critical error SSM will be rebooted. Explanation The listed component - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 327
2a). Error Message RSCN-2-PSS_FAILED: RSCN PSS operation failed: [chars]: [chars]. Explanation The Registered State Change Notification (RSCN) persistent storage service (PSS) operation failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message RSCN - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 328
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message RSCN-2-SWRSCN_REJECT: SW-RSCN rejected: [chars]: fcid [chars], Reason code-[chars], Reason code expl-[chars]. Explanation The Registered State Change - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 329
Cisco MDS SAN-OS Release 2.0(1b). Error Message SCHEDULER-2-SCH_SYSLOG_MTS_ERR: MTS error: [chars]. Explanation Messaging and Transaction Service (MTS) operation failure. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 330
while performing input/output to the persistent storage service (PSS). Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 331
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SCHEDULER-3-SCH_SYSLOG_USER_ERR: Description: Failed to execute job for user id [chars] Error:[dec]. Explanation Error while attempting to execute - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 332
error and response code listed. No SCSI discovery can be performed. Recommended Action Enter the show process cpu and show system internal sysmgr service all commands or use a similar Fabric Manager/Device Manager procedure to collect further information. See WWN Manager system error codes for the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 333
due to error: [hex]. Explanation SCSI target process persistent storage service (PSS) initialization failed due to the error listed. No RATOV is used. Enter the show process cpu and show system internal sysmgr service all commands or use a similar Fabric Manager/Device Manager procedure to collect - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 334
@cisco.com Error Message SCSI target-3-PSS_MAX_KEY_FAIL: pss set runtime max key failed due to error: [hex]. Explanation SCSI target process persistent storage service (PSS) set runtime max key failed because of the error listed. No SCSI discovery can be performed. Recommended Action Enter the show - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 335
Error Message SCSI target-3-PSS_SNAPSHOT_FAIL: pss snapshot runtime to uri:[chars] failed due to error: [hex]. Explanation SCSI target process persistent storage service (PSS) snapshot of runtime to uri failed because of the error shown in the error message. Recommended Action Enter the show flash - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 336
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] SECURITYD Messages This section contains the security and accounting daemon (SECURITYD) messages. SECURITYD-2 Error Message SECURITYD-2- - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 337
and accounting daemon is exiting. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). SECURITYD-3 Error Message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 338
Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SECURITYD-6-FIPS_MODE_SET: FIPS mode is [chars] for service [chars]. Explanation FIPS mode is changed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 339
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SENSOR-2-SNSM_SYSLOG_SHUTDOWN: Sensor Mgr process shutting down: [chars]. Explanation Sensor Manager syslog message. Recommended Action No action is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 340
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SENSOR-3-SNSM_SYSLOG_BAD_MTS_MSG: Sensor Mgr Received bad MTS message: [dec]. Explanation Sensor manager - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 341
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SENSOR_USD-2-SNSM_SYSLOG_SHUTDOWN: Sensor Mgr process shutting down: [chars]. Explanation This is an informational message indicating that the Sensor - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 342
[dec], Error code = [dec]. Explanation This is an informational message indicating a receiving error from the messaging and transaction service (MTS). Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message SENSOR_USD-3-SNSM_SYSLOG_BAD_MTS_MSG: Sensor Mgr - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 343
flow client encountered the listed error. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). SFM Messages This - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 344
LOG_ERR_SME_DBSYBC_REJECT_CLUSTER_ALREADY_EXISTS: Database Synchronization for a new cluster (id %llx) rejected because another SME cluster (name , id %llx) already exists. Explanation A switch can be part of only one SME cluster. Recommended Action No action is required. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 345
persistent state about a previous cluster membership incarnation, but the switch has not provisioned the interface for SME. Recommended Action No action 3.2(2). Error Message SME_CPP-5-SME_DISABLED: SME Disabled. Explanation SME service is Disabled. Recommended Action No action is required. OL- - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 346
comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.2(2). Error Message SME_CPP-5-SME_ENABLED: SME Enabled. Explanation SME service is enabled. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(2). SME_CPP-SLOT#-2 Error Message SME_CPP-SLOT - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 347
support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support is restarting stateless. Explanation Because of an unrecoverable error, the switched port analyzer (SPAN) is starting stateless. The currently active - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 348
MDS SAN-OS Release 1.3(1). Error Message SPAN-3-SYSINFO_TIMEOUT: Span timed out waiting for response from port manager for sys info. Explanation The switched port analyzer (SPAN) request for critical system information from the port manager has timed out. SPAN is exiting and the system manager will - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 349
: Default to all VSANs for SPAN egress session. Explanation Generation 2 fabric switches support only one VSAN filter for an egress SPAN session. If a VSAN is Because of an unrecoverable persistent storage service (PSS) corruption error, the switched port analyzer (SPAN) starts stateless - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 350
Error Message SPAN-5-STATELESS_RESTART_ON_ACTIVE: Span is restarting as Span on active sup was restarted stateless. Explanation Because of an unrecoverable error, the switched port analyzer (SPAN) on the active supervisor was restarted stateless. So, the standby SPAN restarts to get in sync with the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 351
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] SPI_SLOT#-2 Error Message SPI-SLOT#-2-SPI_INFO: [chars] Explanation SPI Informational message. Recommended Action No action is required. Introduced Cisco MDS SAN- - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 352
Cisco MDS SAN-OS Release 1.3(4a). Error Message SVC-2-SVC_SYSLOG_PATH_FAILURE: System Health detected SVC packet path failure for [chars]. Explanation The Caching Services Module (CSM) has been brought down by the System Health monitor. System health has detected a failure in the packet path between - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 353
level of code. 4. If the error continues, ask your customer support representative for assistance. Introduced Cisco MDS SAN-OS Release 1.3(1). Error [chars]. Explanation The internal disk drive for the node on the Caching Services Module (CSM) has failed.The node shut down. Other log entries may - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 354
cluster and if necessary repeat step 1 with the latest level of code. 3. If the error continues, ask your support representative for assistance. It may be necessary to replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 355
the log has not been marked as fixed, manually mark the error as fixed. Introduced Cisco MDS dump. Save the dump data. 4. Ask your customer support representative for assistance. 5. Mark the error you have just the node. If the problem persists, replace the Caching Services Module. Introduced Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 356
node. If the problem persists, replace the Caching Services Module. Introduced Cisco MDS problem in the cluster. Recommended Action 1. Ensure that the software is at the latest level on the cluster. 2. Run a configuration dump and a logged data dump. Save the dump data. 3. Ask your customer support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 357
the dump data. 3. Ask your customer support representative for assistance. 4. Mark the error you Using service for Cisco MDS 9000: Configuration Guide. 2. Mark the error you have device port have failed and you cannot solve the problem by changing cables, check the condition of the remote - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 358
1. 3. Perform Fibre Channel switch problem determination and repair procedures for the Fibre Channel switches containing the node, and connected error log dump if no switch or disk controller failures were resolved in Steps 2 and 3. Call your customer support representative. Introduced Cisco MDS SAN - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 359
problems are found, mark this error as fixed. 3. If no switch or disk controller failures can be found, take an error log dump and call your customer support and no other cause can be determined, replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 360
to the service documentation for the disk enclosure or disk controller and the Fibre Channel network fabric to resolve the reported problem. 4. do not show a good status, contact the customer support representative to resolve the problem with the disk controller. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 361
or because of a Fibre Channel switch zoning problem. Recommended Action 1. Resolve any known Fibre Channel network problems. 2. Confirm that managed disks have are unable to make the appropriate changes, ask your customer support representative for assistance. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 362
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_ERR_CFG_ALL_SSH_KEYS_REMOVED ) Attempt to delete SSH keys (no effect) [chars]. Explanation The svctask - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 363
human intervention to continue. Recommended Action Contact your customer support representative for assistance. Introduced Cisco MDS SAN-OS Release data. Recommended Action Reload the node. If the problem persists, replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 1.3(1). OL - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 364
Recommended Action Reload the node. If the problem persists, replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release latest level of code. 4. If the error continues, ask your customer support representative for assistance. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-328 Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 365
repeat Step 1 with the latest level of code. 3. If the error continues, ask your customer support representative for assistance. It may be necessary to replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: [chars]. Explanation Syslog - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 366
of the pinned data. Recommended Action Perform problem determination on the error log to determine the the error persists, replace the Caching Services Module. Introduced Cisco MDS SAN-OS 3. If the error continues, ask your customer support representative for assistance. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 367
. Recommended Action If there is a problem executing configuration commands, follow these steps: the cluster and should cause the switch to deactivate the IP address associated with support representative for assistance, if the error continues. It may be necessary to replace the Caching Services - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 368
latest level on the cluster. If not, upgrade the cluster and if necessary repeat step 1 with the latest level of code. 3. Ask your customer support representative for assistance, if the error continues. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 369
on the cluster. If not, upgrade the cluster and if necessary repeat step 1 with the latest level of code. 3. Ask your customer support representative for assistance, if the error continues. Introduced Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 370
on the cluster. If not, upgrade the cluster and if necessary repeat step 1 with the latest level of code. 3. Ask your customer support representative for assistance, if the error continues. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] Explanation - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 371
remote node. Recommended Action Determine if the remote node is still online. If not, determine the problem on the remote node. If it is online, retry the command. Contact your customer support representative for assistance if it still fails. Cisco CLI commands or Fabric Manager procedures may be - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 372
problem on the remote node. If it is online, retry the CLI command or use a similar Fabric Manager procedure. Contact your customer service representative . 5. If the installation fails again, report the problem to your customer support representative. 6. Mark the error you have just repaired - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 373
offline node from the cluster. 3. Retry the software upgrade command. 4. If the installation fails again, report the problem to your customer support representative. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_PLIC_LINK ) Connection - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 374
has been stopped because of errors occurring during migration. These errors have been logged. Recommended Action Analyze the error log. Perform problem determination and correct any errors which have occurred. Migrate any specific extents which were not migrated because of the errors. Introduced - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 375
LUN. Recommended Action If there are device LUNs that should have been discovered by the node, follow these steps: 1. Perform a manual discovery. 2. Perform problem determination on the device. Introduced Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 376
port has prevented the use of the preferred port. Recommended Action Perform problem determination on the controller and network to determine the cause of the port dump has been created. Recommended Action Contact your customer support representative for assistance. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 377
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] SVC-5 Error Message SVC-5-NODE_NOTICE_MSG: [chars]. Explanation Syslog message from a SAN Volume Controller (SVC) interface node. Recommended Action No action is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 378
line card, if the error persists. The node(s) then has to be removed and added back to the cluster. 3. Replace the Caching Services Module, if the error persists. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_PWR_BUTTON ) Power withdrawn - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 379
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_FC_ER_PREPARE_COMPLETED ) Flash Copy Prepared [chars]. Explanation The flash copy mapping or consistency - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 380
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_COPY_COMP ) Remote Copy complete [chars]. Explanation Background copy complete. The standalone - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 381
No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_CLUSTER_DISCOVERY ) Manual Managed Disk discovery invoked [chars]. Explanation The svctask detectmdisk IBM command has been invoked. Recommended Action No action is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 382
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_CLUSTER_MODIFY ) Cluster attributes modified [chars]. Explanation The svctask chcluster IBM CLI - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 383
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_DELETE_MAPPING ) Virtual Disk to Host SCSI mapping deleted [chars]. Explanation The svctask - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 384
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_ERRORLOG_DUMPLOG ) Error log dumped [chars]. Explanation The svctask dumperrlog IBM CLI command has - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 385
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_FEATURISATION_CHANGED ) Licensed settings modified [chars]. Explanation The svctask chlicense IBM - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 386
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_HWS_SET_NAME ) IO Group name modified [chars]. Explanation The svctask chiogrp IBM CLI command has - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 387
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_MDISK_GRP_SET_NAME ) Managed Disk Group attributes modified [chars]. Explanation The svctask - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 388
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_NODE_CREATE_CLUSTER ) Cluster created [chars]. Explanation The cluster add IBM CLI command has been - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 389
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_NODE_UNPEND ) Node Unpend [chars]. Explanation The node has gone online. Recommended Action No - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 390
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_REMOTE_DELETECONSTGRP ) Remote Copy consistency group deleted [chars]. Explanation The svctask - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 391
. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_REMOTE_SWITCH ) Remote Copy relationship switched [chars]. Explanation The svctask switchrcrelationship IBM CLI command has been invoked. Recommended Action No action is required. Introduced - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 392
[chars]. Explanation The software upgrade process failed, and all nodes have been restored to the previous level of code. Recommended Action Perform problem determination on the cause of the upgrade failure and take corrective action before retrying the upgrade. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 393
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_VDISK_DELETE ) Virtual Disk deleted [chars]. Explanation The svctask rmvdisk IBM CLI command has - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 394
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_VDISK_MOVE_HWS ) Virtual Disk IO Group changed [chars]. Explanation The svctask chvdisk -iogrp IBM - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 395
show environment fan CLI command or use an equivalent Fabric Manager/Device Manager procedure to determine fan operation and take action to cool down the switch. Introduced Cisco MDS SAN-OS Release 1.3(4a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-359 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 396
with a battery. Recommended Action Replace the battery. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-360 Cisco MDS 9000 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 397
a battery. Recommended Action Replace the battery. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(4a). SVC_BATTERY-SLOT#-4 Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 398
[chars] is in the boot scope, but tried a regular handshake. Discarding request. Explanation A service is trying to take actions that belong to a different class of services. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 399
the snapshot configuration has failed because the old data could not be removed. Recommended Action If the problem persists, issue the init system CLI command from the switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command. This command will initialize the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 400
removed. Recommended Action If the problem persists, issue the init system CLI command from the switch(boot)# prompt to initialize the configuration support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 401
Action If the problem persists, issue the init system CLI command from the switch(boot)# prompt to service. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 402
service. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support Action If the problem persists, issue the init system CLI command from the switch(boot)# prompt to - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 403
partition used to store nonvolatile persistent storage service (PSS) files could not be formatted successfully. The supervisor will be reset. Recommended Action If the problem persists, contact customer support. If you purchased Cisco support through a Cisco reseller, contact the reseller directly - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 404
SAN-OS Release 1.3(3c). Error Message SYSMGR-2-INVALID_HANDSHAKE: Invalid secret ([dec]) received from service [chars]. Expected [dec]. Explanation A service cannot be started. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 405
The nondisruptive upgrade has failed. Recommended Action The switch needs to be rebooted. Introduced Cisco MDS SAN- support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-PARSEERR_DUP_UGRPENTRY: [chars]: service - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 406
]: duplicated definition for option [chars]- Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 407
MTS unaware or not defined for scope "[chars]". Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 408
[chars]-][chars] cannot be set to "[chars]". Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 409
[chars] due to the standby mode wait for that service. Explanation The system image contains an inconsistent list of services. The initialization of the system can not proceed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 410
a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-PARSEERR_REP_UGRPENTRY: [chars]: service [chars] is used in more than one upgrade group. First - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 411
the upgrade group is already called "[chars]". Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 412
problem persists, contact customer support. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support Restoring of runtime database for fabric switch upgrade failed during boot (error- - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 413
: Saving of runtime database for fabric switch upgrade failed (error-id [hex]). service failed to respond to SIGKILL sent to it by system manager. Recommended Action If you purchased Cisco support standby is online, fix the problem by setting the boot variables appropriately. OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 414
If the problem persists, Use the init system CLI command from the switch(boot)# prompt support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support because messaging and transaction service (MTS) on the active - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 415
is almost full. Recommended Action Issue the system pss shrink CLI command. If this message continues, contact your technical support representative. Introduced Cisco MDS SAN-OS Release 3.0(1). SYSMGR-3 Error Message SYSMGR-2-WARMSWITCHOVER_START: This supervisor is becoming active. Explanation - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 416
in the timeout period. Explanation The listed service failed to respond to a request to store its configuration into the startup-configuration. The overall configuration copy has failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 417
Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-3-DAEMONIZE_FAILED: Unable to daemonize service "[chars]": [chars] ([dec]). Explanation A service could not be started. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 418
. The system manager has terminated this service and if this service has restartability set to TRUE, the service will restart automatically. Recommended Action If the problem persists, contact your customer support representative. If you purchased Cisco support through a Cisco reseller, contact the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 419
hex]. Explanation The identity of a service is inconsistent in the image file. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 420
back to System Manager in the specified timeout period. Explanation A required service has failed to send a response after receiving a request for the fabric switch upgrade. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 421
has terminated its execution normally. Depending on the value of the error code and the high availability policies implemented for the service, the service might be restarted automatically. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 422
[dec] seconds. Terminating. Explanation A spawned service could not handshake with the system manager and was terminated. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 423
Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-4-PARSEWARN_RESTART_CNT_TOO_BIG: Service "[chars]": [chars] restart count of [dec] too big, support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 424
action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-5-ALL_SCOPES_STARTED: System services have completely started at this time. Explanation System services have started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 425
started (PID [dec]). Explanation The requested configuration erase has started. The error message shows the process ID of the process servicing the request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-5-CFGINIT_STARTED: Initialization - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 426
reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message SYSMGR-5-HANDSHAKE_DONE: Handshake with service "[chars]" successfully performed. Explanation Handshake with the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 427
a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(3). Error Message SYSMGR-5-ISSU_ABORT: Notifying services of aborted ISSU (PID [dec]). Explanation This message indicates - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 428
This message is printed only on active supervisor, and indicates that service with mentioned UUID has requested a partial write mem CLI command. The of the runtime database. This happens during the nondisruptive fabric switch upgrade. Recommended Action No action is required. Introduced Cisco - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 429
to save the runtime database. This happens during the nondisruptive fabric switch upgrade. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message SYSMGR-5-SERVICE_DELETED: Service [chars] has been removed from the System Manager database. Explanation The - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 430
Explanation This is an internal debugging message. This is not a problem or malfunction. Recommended Action No action is required. Introduced Cisco Message SYSMGR-6-SRVSTATE_CHANGED: State for service "[chars]" changed from [chars] to [chars]. Explanation The service has changed state. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 431
received. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-7-LIBCDB_FAILURE: Conversion for service "[chars]" failed in libcdb. Explanation Either the system could not find conversion tarball or there is no conversion library needed for - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 432
is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-7-UNEXPECTEDMSG: Opcode [dec] not expected at this time from service "[chars]" ([chars]). Explanation Unexpected opcode. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 433
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] SYSTEMHEALTH Messages This section contains the system health (SYSTEMHEALTH) messages. SYSTEMHEALTH-2 Error Message SYSTEMHEALTH-2-OHMS_BATTERY_FAILED: Battery [ - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 434
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-2-OHMS_CACHE_DISK_FAILED: Cache disk [dec] failed for module [dec]. Explanation Cache disk failed. Recommended Action No action is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 435
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-2-OHMS_LC_CF_INIT_ERRORS: Compact Flash firmware CRC checksum procedure encountered an error during initialization on module [dec] - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 436
request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSTEMHEALTH-2-OHMS_SWITCHOVER_REQ: Supervisor switch over being requested due to errors found [chars] test. Explanation System Health switchover request. Recommended Action No action is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 437
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-2-OHMS_TCAM_PARITY_OFLOW: Too many TCAM parity errors detected on module [dec]. Explanation More parity errors than that can be - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 438
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-4-OHMS_BOOTFLASH_FAILING: Bootflash starting to fail on module [dec]. Explanation System Health bootflash failing. Recommended Action No - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 439
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-4-OHMS_CDISK_FAILING: Cache disk [dec] starting to fail on module [dec]. Explanation System Health cache disk failing. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 440
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-4-OHMS_EOBC_FAILING: EOBC starting to fail on module [dec]. Explanation System Health Ethernet out-of-band channel failing. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 441
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-4-OHMS_INBAND_TEST_ERRORS: Too many errors while running the inband test. Explanation Inband test has had too many errors while running. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 442
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-4-OHMS_NVRAM_ERRORS: Too many errors on module [dec] while running the Nvram test. Explanation NVRAM test has had too many errors while - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 443
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_CRC_INIT_ERRORS: Compact Flash firmware CRC checksum procedure encountered an error during initialization on module [dec] - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 444
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-4-OHMS_SVC_DAEMON_FAILED: System Health process running on module [dec] SVC node [dec] exited due to errors. Explanation Online system - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 445
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-4-STB_ARB_MAX_FAIL: Standby Arbiter test MAX failures reached. Explanation Standby arbiter test maximum failures reached. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 446
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-5-OHMS_EMGMT_FAILING: Management port on module [dec] starting to show signs of failures. Explanation System Health Ethernet management - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 447
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-5-OHMS_TCAM_PARITY_CLEARED: Failing conditions for TCAM on module [dec] have been cleared. Explanation System Health TCAM failures - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 448
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-6-OHMS_BOOTFLASH_CLEARED: Failing conditions for bootflash on module [dec] have been cleared. Explanation System Health bootflash - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 449
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-6-OHMS_INBAND_DROP: Inband Dropping frames from module [dec] due to unknown reasons. Explanation System Health inband non-timeout drop. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 450
Plus (TACACS+) daemon is exiting. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-414 Cisco MDS 9000 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 451
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] TACACS-3 TACACS-6 Error Message TACACS-3-TACACS_ERROR_MESSAGE: [chars]. Explanation Terminal Access Controller Access Control System Plus (TACACS+) error message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 452
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] TCAP Messages This section contains the terminal capture (TCAP) messages. TCAP-2 Error Message TCAP-2-MEM_FULL: Memory allocation failed. Explanation Terminal - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 453
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] TLPORT Messages This section contains the translation port (TLPORT) messages. TLPORT-2 TLPORT-3 Error Message TLPORT-2-INITFAIL: TL Port Manager Initialization - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 454
Cisco MDS SAN-OS Release 1.2(2a). TLPORT-6 Error Message TLPORT-3-PSSERROR: [chars]. Explanation TL port manager encountered a persistent storage service (PSS) error. The error message specifies the context where the failure occurred. Recommended Action No action is required. Introduced Cisco MDS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 455
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message TLPORT-6-PORTDOWN: Translation Port [chars] DOWN. Explanation A port configured as a TL port is down and out of operation. The error message shows - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 456
section contains the TTY daemon (TTYD) messages. TTYD-2 Error Message TTYD-2-TTYD_ERROR: TTYD Error [chars]. Explanation Critical TTY daemon (TTYD) problems. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message TTYD-2-TTYD_MTS: TTYD Message queue [dec - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 457
error [chars]([hex]). Explanation Miscellaneous TTY daemon (TTYD) problems. Recommended Action No action is required. Introduced Cisco MDS SAN exception has been logged. The error message shows which DPP encountered this problem. Recommended Action No action is required. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 458
2a). Deprecated Cisco MDS SAN-OS Release 1.3(4b). VEC-SLOT#-4 Error Message VEC-SLOT#-3-LOG_GUID_MISMATCH: GUID Mismatch DPP [dec] PWWN [chars] lun [chars] Expected [chars] Read [chars]. Explanation The disk GUID verification performed by the data path processor (DPP) failed. Access to the disk is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 459
LOG_ERR_VEC_GID_FSM: Illegal Event [chars] in State [chars] FSM [chars]. Explanation An event is received for a state in the virtual enclosure client (VEC) GUID ID finite state machine (FSM) that should not have occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 460
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message VEC-SLOT#-5-LOG_ERR_VEC_HOST_XP_FSM: Illegal Event [chars] in State [chars] Host VSAN :[dec] Host pWWN :[chars] VEP pWWN :[chars]. Explanation An - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 461
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message VEC-SLOT#-5-LOG_ERR_VEC_TP_FSM: Illegal Event [chars] in State [chars] Host VSAN :[dec] TP nWWN :[chars] TP pWWN :[chars]. Explanation An event is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 462
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message VEC-SLOT#-5-LOG_ERR_VEC_VSAN_FSM: Illegal Event [chars] in State [chars] VSAN [dec]. Explanation An event is received for a state in the virtual - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 463
Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. (VEDB) library is up and ready to accept client requests The service was initialized in the mode shown in the error message. Recommended Action - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 464
processor (CPP). Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(2b). Error Message VES-SLOT#-5-LOG_ERR_VES_PATH_FSM: disk guids dont match - received verify_mismatch for pid [dec] from vec [dec]. Explanation A VERIFY MISMATCH event was received for a state in the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 465
1.2(2a). VFC Messages This section contains the virtual Fibre Channel (VFC) messages. VFC-3 Error Message VFC-3-VFC_MEM_ERROR: Memory consistency problem. Explanation Miscellaneous target error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message VFC - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 466
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message VFC-6-STARTING: deamon started. Explanation The virtual Fibre Channel (VFC) daemon successfully started. Recommended Action No action is required. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 467
code shown in the error message. No SCSI discovery can be performed. Recommended Action Enter the show process cpu and show system internal sysmgr service all CLI commands or use a similar Fabric Manager/Device Manager procedure to collect more information. See the WWN manager system error codes for - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 468
OS Release 1.2(2a). Error Message VHBAD-3-PSS_MAX_KEY_FAIL: pss set runtime max key failed due to error: [hex]. Explanation SCSI target process persistent storage service (PSS) set runtime max key failed because of the error shown in the error message. No SCSI discovery can be performed. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 469
Message VHBAD-3-PSS_STORE_FAIL: pss store runtime entry key:[hex] val:[hex] failed due to error: [hex]. Explanation SCSI target process persistent storage service (PSS) store runtime entry key failed because of the error shown in the error message. Recommended Action Enter the show flash CLI command - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 470
Check the system memory. If system memory is low, reset the switch. Introduced Cisco MDS SAN-OS Release 1.2(2a). VNI-6 Error Message VNI-3-INIT_FAILED: Initialization failed. Component [chars]. Explanation The service failed to start.The failure occurred while initializing the component shown in - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 471
been deleted. Explanation The specified VSAN has been deleted. The service deleted all the configuration on that VSAN. Recommended Action No action support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 472
manager (VPMON) daemon experienced a critical problem. Recommended Action No action is required. (DPP) again. Recommended Action Intelligent switch application programming interface (ISAPI) users need Explanation Could not send persistent storage service (PSS) synchronization notification to the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 473
directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VPM-3-UNKNOWN_MSG: Recvd. from Node=[dec] SAP=[dec]. Explanation The virtual port manager has received an unknown message from the node and service access point (SAP) shown in the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 474
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] VPM-6 Error Message VPM-6-BECAME_ACTIVE: Became ACTIVE from standby mode. Explanation The virtual port manager on the standby supervisor became active and it is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 475
virtual port manager is up and ready to accept client requests. The service was initialized in the mode shown in the error message. Recommended Error Message VPM-6-SWITCHOVER: Switching Over to other Sup. Explanation The virtual port manager has successfully switched over to the standby supervisor - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 476
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message VPM-6-VPMON_INFO: [chars]. Explanation A virtual port manager informational message. Recommended Action No action is required. Introduced Cisco MDS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 477
Action Check the system memory. If memory is low, reset the switch. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VRRP_CFG-3-INIT_FAILED: Initialization failed. Component [chars]. Explanation The service failed to start. The failure occurred while initializing the component shown in - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 478
9000 Family Send documentation comments to [email protected] VRRP_CFG-5 Error Message VRRP_CFG-5-STARTING: VRRP Manager service started. Explanation The service successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message VRRP_CFG - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 479
-6 Error Message VRRP_CFG-6-STARTING: VRRP Manager service started. Explanation The service successfully started. Recommended Action No action is Error Message VRRP_ENG-2-ALLOC_MEMORY: Memory allocation failed. Explanation The service failed to allocate a block of dynamic memory. Recommended Action - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 480
router. Introduced Cisco MDS SAN-OS Release 1.2(2a). VRRP_ENG-4 Error Message VRRP_ENG-3-INIT_FAILED: Initialization failed. Component [chars]. Explanation The service failed to start. The failure occurred while initializing the component shown in the error message. Recommended Action Enter the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 481
Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message VRRP_ENG-5-STARTING: VRRP Engine service started. Explanation The service successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). VRRP_ENG-6 Error Message - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 482
Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VRRP_ENG-6-STARTING: VRRP Engine service started. Explanation The service successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VRRP_ENG - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 483
Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VSAN-3-CFS_OPERATION_FAILED: cfs [chars] operation failed : [chars]. Explanation The Cisco Fabric Services (CFS) operation has failed. Recommended Action Check the reason for the failure of the CFS operation and rectify the problem - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 484
MDS SAN-OS Release 1.2(2a). Error Message VSAN-6-CFS_MERGE_NOT_SUPPORTED: merging of fctimer configuration data is not supported. Explanation Merging of fctimer configuration data using CFS is not supported. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 485
MDS SAN-OS Release 1.2(2a). Error Message VSHD-2-VSHD_SYSLOG_PSS_SNAPSHOT_ERR: Source URI:[chars] Destination URI:[chars] errcode:[dec]. Explanation Persistent storage service (PSS) snapshot error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). VSHD-3 Error - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 486
VSHD-3-VSHD_SYSLOG_MTS_ERR: message [chars]. Explanation Messaging and transaction service (MTS) message handling error. Recommended Action No action database be identical among all switches in the fabric. Recommended Action Edit the configuration on one of the switches to obtain the desired role - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 487
configuration database received during merge. Explanation This is probably occurring due to different versions of system image on switches in the fabric. Recommended Action Make sure all switches are running the same version of the system image. Introduced Cisco MDS SAN-OS Release 2.0(1b). VSHD - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 488
dynamically allocated WWNs are available. However, statically assigned WWNs such as switch WWN, port WWN, and so on are still available. Recommended support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 489
on the console or in the system log. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-2-PSS_BKP_PSS_MISMATCH - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 490
SAN-OS Release 1.2(2a). Error Message WWN-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars]. Explanation Could not send persistent storage service (PSS) synchronization notification to the standby supervisor module. PSS type, operation, and key are shown in the error message. Recommended - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 491
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message WWN-3-STARTUP_COPY_TO_RUNNING_FAILED: [chars]. Explanation Could not snapshot Startup-Config PSS to Running-Config. The description of error is [str - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 492
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message WWN-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec]. Explanation There was a version mismatch between the WWN manager and one of its persistent storage - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 493
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message WWN-6-BECAME_ACTIVE: Became ACTIVE from standby mode. Explanation The WWN manager on the standby supervisor module became active and it is ready to - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 494
manager is up and ready to accept client requests for WWNs. The service was initialized in the mode shown in the error message. Recommended Action Error Message WWN-6-SWITCHOVER: Switching Over to other Supervisor. Explanation The WWN manager has successfully switched over to the standby supervisor - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 495
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] XBAR Messages This section contains the crossbar (XBAR) messages. XBAR-3 XBAR-5 Error Message XBAR-3-MEM_FULL: Memory allocation failed. Explanation Memory - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 496
Fabric Manager/Device manager procedure to collect more informations about the crossbar component. Power cycling the module may fix the problem. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message XBAR-5-XBAR_INIT_FAIL: Xbar [[dec].[dec]] reported failure durinig intialization return_code - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 497
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message XBAR-5-XBAR_PORT_DISABLE_FAIL: Xbar [[dec].[dec]] reported failure to disable port [dec] return_code [hex] ([chars]). Explanation The supervisor has - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 498
ZONE-6-ZS_INVALID_MEMBER: Invalid member [dec] [chars]. Explanation Invalid member type [dec] [chars] received from the API call. Recommended Action Perform a manual build fabric using fcdomain's interface if you would like to remove the unused virtual domain(s) from the fcdomain list. Introduced - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 499
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message XBAR_CLIENT-2-PROC_DN: Process is shutting down: [chars]. Explanation The crossbar client process is exiting. Recommended Action Enter the show xbar- - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 500
as it appears on the console or in the system log. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-464 Cisco MDS 9000 Family - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 501
: [chars]. Explanation The zone server cannot acquire change authorization. Recommended Action Verify the interoperability mode on all the switches or retry later. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-2-ZS_CHANGE_ACQUIRE_AUTH_FAILED: Acquire authorization failed on VSAN - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 502
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ZONE-2-ZS_CHANGE_ACTIVATION_FAILED_RESN_DOM: Activation failed : reason [chars] domain [dec]. Explanation The zone server cannot activate because of - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 503
SFC failed : [chars]. Explanation The zone server cannot stage the zone configuration. Recommended Action Verify the interoperability mode on all the switches. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-2-ZS_CHANGE_SFC_REJECTED: SFC received from remote domain [dec] is rejected - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 504
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ZONE-2-ZS_CHANGE_STAGE_DISTRIBUTE_ZS_DB_FAILED: Stage distribute zoneset database failed on VSAN [dec]. Explanation The zone server cannot stage - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 505
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ZONE-2-ZS_FIPS_COMPLIANCE_FAILURE: FIPS compliance error: consecutively same random numbers. Explanation FIPS compliance error identifying the same - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 506
[dec]). Explanation Interface on the VSAN was isolated because the adjacent switch is not responding to zone server requests. Recommended Action Flap the failure. Recommended Action Compare the active zone set with the adjacent switch by entering the zone merge interface CLI command or by using a - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 507
Recommended Action Set the interoperability mode to the same value on both switches. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message ZONE-2- failed : [chars]. Explanation The zone server messaging and transaction service (MTS) operation failed. Recommended Action No action is required. - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 508
Message ZONE-2-ZS_PSS_VER_MISMATCH: PSS version mismatch URL: [chars] (expected [chars], got [chars]). Explanation Configuration version mismatch. persistent storage service (PSS) URL expected the shown version, but the stored version is different. Recommended Action Upgrade or downgrade to the - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 509
9000 Family Send documentation comments to [email protected] Error Message ZONE-2-ZS_TCAM_SWITCHED_TO_SOFT_ZONING_MODE: Switched to soft zoning : Reason: Hard zoning disabled. Explanation Switched to soft zoning. Hard zoning was disabled due to a TCAM programming failure. Recommended Action - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 510
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ZONE-3-ZS_ACTIVATION_FAILED_DUE_TO_QOS_DISABLED: Activation failed due to qos not enabled. Explanation Activation of zone set failed because QoS was - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 511
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ZONE-4-ZS_DB_WARNING: [chars]. Explanation Database operation warning. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 512
mode. Explanation Active or full zone set has members that are not supported in the current interoperability mode set on the VSAN. Recommended Action Either or make sure that the active or full zone set has only supported members in the current interoperability mode. Introduced Cisco MDS SAN-OS - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 513
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ZONE-5-ZS_POLICY_CHANGE: Default zoning policy changed to [chars]. Explanation Default zoning policy changed to permit or deny. Recommended Action No - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 514
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ZONE-6-LZ_GENERAL_EVENT: [chars]. Explanation The LUN read-only zoning process has generated an important event. The description of the event is - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 515
the domain. Either the domain list does not match or authorization has already been acquired by another switch. Recommended Action Verify the interoperability mode on the switch. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-6-ZS_FC2_OPER_INFO: FC2 [chars] operation failed : [chars - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 516
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] 2-480 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 517
Send documentation comments to [email protected] A A P P E N D I X OHMS_BOOTFLASH_ERRORS Revised: November, 2007 OL-15956-01 DISK FAILURE CODES List of all Disk Failure Codes are described in (Table A-1). Table A-1 OHMS_BOOTFLASH_ERRORS Description Reason Code 0 1 2 3 4 5 6 7 8 9 10 11 - HP Cisco MDS 9222i | Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 518
DISK FAILURE CODES Appendix A OHMS_BOOTFLASH_ERRORS Send documentation comments to [email protected] Table A-1 OHMS_BOOTFLASH_ERRORS Description (continued) Reason Code 17 18 19 20 21 22 23 24 Acronym Description OD_DISK_IOCTL_GET_RESET_INFO_FAI Ioctl to get current reset information
Send documentation comments to [email protected]
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco MDS 9000 Family System Messages
Reference
Cisco MDS 9000 SAN-OS Release 3.3(1a)
April 2008
Text Part Number: 0L-15956-01