HP Cisco MDS 9222i Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 355

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_IC_EV_NODE_DISENFRANCHISED ) Node missing [chars]. Explanation A node is missing from the cluster. Recommended Action 1. Check the status of the nodes and find the node with a status of offline. 2. Repair the failing node. When the repair has been completed, this error will automatically be marked as fixed. 3. Check the node status. If all the nodes in the cluster are now online, but the error in the log has not been marked as fixed, manually mark the error as fixed. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_CLUSTER_PATH_FAILURE ) Cluster path failure [chars]. Explanation A cluster path has failed. The node cannot communicate with all the other nodes in the cluster. Recommended Action 1. Repair the Fibre Channel network fabric. 2. Check the status of the node port. If the status of the port shows as online, mark the error you have just repaired as fixed. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_CPU_QUANTITY ) Processor change detected [chars]. Explanation The Caching Services Module (CSM) is failing. Recommended Action 1. Replace the CSM. 2. Check node status. If all nodes show a status of online, mark the error you have just repaired fixed. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_DISK_FULL ) Node hard disk full [chars]. Explanation The error that is logged in the cluster error log indicates a software problem in the cluster. Recommended Action 1. Ensure that the software is at the latest level on the cluster. 2. Delete files from the /dumps directory. 3. Run a configuration dump and a logged data dump. Save the dump data. 4. Ask your customer support representative for assistance. 5. Mark the error you have just repaired as fixed. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_FC_ADAP_FAIL ) Logical Fibre Channel port reported failed [chars]. Explanation No active and functioning logical Fibre Channel port was detected by the software. Recommended Action Reload the node. If the problem persists, replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-319