HP Cisco MDS 9222i Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 482

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message VRRP_ENG-6-INTERFACE_DOWN: Cannot start the VR [dec] since the interface [chars] is down. Explanation The specified virtual router is enabled but cannot change state from initializing. The specified interface is down or does not have a primary IP address configured. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VRRP_ENG-6-INTERFACE_STATE_CHANGE: Interface [chars] state changed to [chars]. Explanation The interface specified has changed state This could have triggered a VRRP status change. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VRRP_ENG-6-STARTING: VRRP Engine service started. Explanation The service successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VRRP_ENG-6-VR_STATE_CHANGE: VR ID [dec] on interface [chars] state changed to [chars]. Explanation The status of the specified virtual router has changed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VRRP_ENG-6-VSHA_RESULT: VR ID [dec] on interface [chars] state change request result [chars]. Explanation The result of the request for status change on the virtual router (with VSHA extension) specified is shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-446 Cisco MDS 9000 Family System Messages Reference OL-15956-01