HP Cisco Nexus 5000 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Re - Page 13

Software Download Process Send documentation comments to [email protected] Selecting the Correct Software Image for an MDS 9200 Series Switch The system and kickstart image that you use for an MDS 9200 series switch depends on which switch you use, as shown in Table 6. Table 6 Software Images for MDS 9200 Series Switches Cisco MDS 9200 Series Switch Type 9222i 9216i Supervisor Module Type Supervisor-2 module Naming Convention Filename begins with m9200-s2ek9 Filename begins with m9200-ek9 Selecting the Correct Software Image for an MDS 9500 Series Switch The system and kickstart image that you use for an MDS 9500 Series switch depends on whether the switch is based on a Supervisor-1 module or a Supervisor-2 module, as shown in Table 7. Table 7 Software Images for Supervisor Type Cisco MDS 9500 Series Switch Type 9513, 9509, and 9506 Supervisor Module Type Naming Convention Supervisor-2 module Filename begins with m9500-sf2ek9 Use the show module command to display the type of supervisor module in the switch. The following is sample output from the show module command on a Supervisor 2 module: switch# show module Mod Ports Module-Type Model Status ... ... 7 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 active * 8 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 ha-standby OL-19964-02 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.2(1a) 13