HP Cisco Nexus 5000 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS R - Page 8

Software Download Process Send documentation comments to [email protected] Note Refer to the "Determining Software Compatibility" section of the Cisco MDS 9000 Family CLI Configuration Guide for more details. Note If you would like to request a copy of the source code under the terms of either GPL or LGPL, please send an e-mail to [email protected]. Selecting the Correct Software Image for an MDS 9100 Series Switch The system and kickstart image that you use for an MDS 9100 series switch depends on which switch you use, as shown in Table 2. Table 2 Software Images for MDS 9100 Series Switch Switch MDS 9120 or MDS 9140 MDS 9134, MDS 9124, Cisco Fabric Switch for HP BladeSystem, or Cisco Fabric Switch for IBM BladeCenter Image Filename begins with m9100-s1ek9 Filename begins with m9100-s2ek9 Selecting the Correct Software Image for an MDS 9200 Series Switch The system and kickstart image that you use for an MDS 9200 series switch depends on which switch you use, as shown in Table 3. Table 3 Software Images for MDS 9200 Series Switches Switch MDS 9222i MDS 9216A or MDS 9216i Image Filename begins with m9200-s2ek9 Filename begins with m9200-ek9 Selecting the Correct Software Image for an MDS 9500 Series Switch The system and kickstart image that you use for an MDS 9500 Series switch depends on whether the switch is based on a Supervisor-1 module or a Supervisor-2 module, as shown in Table 4. Table 4 Software Images for Supervisor Type Supervisor Type Supervisor-1 module Supervisor-2 module Switch MDS 9506 and 9509 MDS 9506, 9509, and 9513 Image Filename begins with m9500-sf1ek9 Filename begins with m9500-sf2ek9 Use the show module command to display the type of supervisor module in the switch. For a Supervisor-1 module, the output might look like this: Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(4) 8 OL-14116-12