HP Cisco Nexus 5000 Cisco Nexus 5000 Series Release Notes Release 4.0(1a)N1(1a - Page 25

Cisco Fabric Manager Send documentation comments to [email protected] Zoning In the Edit Local Full Zone Database tool, virtual Fibre Channel interfaces must be specified using the Switch Port WWN method of adding members to a zone. In the Add Members to Zone dialog box, the Switch & Port method and the Domain & Port method are not supported for virtual Fibre Channel interfaces. Caveats This section lists the Cisco Fabric Manager caveats related to managing Nexus 5000 series switches. Open Caveats • CSCq57019 Symptom: The Fabric Manager N-Port Virtualization (NPV) Wizard does not list the Nexus 5000 Series switches that are operating in NPV mode. Workaround: None. • CSCsq06170 Symptom: In Fabric Manager, only one power supply is displayed for a Nexus 5000 Series switch with two power supplies. Workaround: Use Device Manager, which displays the correct information when you use the Power Supplies menu item from the Physical menu. • CSCso82992 Symptom: When using the Roles dialog box in Device Manager, if you edit the role scopes for a role that already has role scopes defined, and then click the Apply button, an error message dialog box states that the entry already exists. Workaround: The changes are saved if you click the Apply button again. • CSCsq23436 Symptom: The load-balancing and traffic-engineering features are not supported on Nexus 5000 Series switches in NPV mode, but Fabric Manager does not disable the configuration of these features. In the Switches > NPV information pane, the Load Balancing tab provides a check box to enable the feature, and the Traffic Engineering tab provides a dialog box to create a traffic engineering session. Workaround: Ignore these configuration options for Nexus 5000 Series switches. • CSCsq14828 Symptom: The web client does not display flow statistics or the Ethernet interface statistics for initiators using Fibre Channel over Ethernet (FCoE) connections to the Nexus 5000 Series switch. Workaround: Use Flow Statistics in Fabric Manager, which displays the flow statistics correctly. The Device Manager displays the Ethernet interface statistics correctly. • CSCsq32710 Symptom: If you logged in to the Nexus 5000 Series switch using a user-defined role, you cannot retrieve the Fibre Channel interfaces using SNMP. Workaround: You can retrieve the information using CLI commands. OL-16601-01 Cisco Nexus 5000 Series Release Notes, Release 4.0(1a)N1(1a) 25