HP Color LaserJet CM6030/CM6040 HP Color LaserJet CM6030/CM6040 MFP Series - S - Page 291
Troubleshooting a firmware update failure, Table 6-4
View all HP Color LaserJet CM6030/CM6040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
Engineering details NOTE: To verify that the firmware update succeeded, print a new configuration page from the control panel and verify that the firmware date code on the configuration page has changed. The following table lists possible reasons for the failure of a remote firmware update and the corrective action required for each situation. Table 6-4 Troubleshooting a firmware update failure Reason for firmware update failure Corrective action The .RFU file is corrupted. The product recognizes that the file is corrupted and rejects the update. Download the .RFU file again and send the new file to the product. The wrong product firmware is contained The product recognizes the product mismatch and rejects the update. Download in the .RFU file. the correct .RFU file and send it to the product. The upgrade was interrupted. For an error message of RESEND UPGRADE, resend the upgrade by USB or Network connection. For an error message of RFU LOAD ERROR, SEND RFU UPGRADE ON USB PORT, resend the upgrade by a computer attached to the USB port. A flash hardware failure occurred. Although it is extremely unlikely, the product might have a hardware failure. Call technical support to address the problem (see the flyer that came with the product for a local telephone support list). Or go to one of the following URLs: www.hp.com/ support/cljcm6030mfp or www.hp.com/support/cljcm6040mfp ENWW Remote firmware updates 271