HP D5259A Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 11
Setting Up the Monitor
View all HP D5259A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation 2. Push the base toward the front of the monitor until it stops. Setting Up the Monitor Before setting up the monitor, place it in a convenient, wellventilated location near your computer. 1. Turn off the power to your computer and other peripheral devices. 2. Connect the video cable (blue connector) 1 from the back of the monitor to the blue 15-pin connector on the back of the computer. Tighten the cable screws to secure the cable to the connector. CAUTION: To avoid damaging the video cable, ensure that the cable aligns with the 15-pin connector. Do not force the cable onto the connector. 3-2 Reference Guide
Installation
2.
Push the base toward the front of the monitor until it stops.
Setting Up the Monitor
Before setting up the monitor, place it in a convenient, well-
ventilated location near your computer.
1.
Turn off the power to your computer and other peripheral
devices.
2.
Connect the video cable (blue connector)
1
from the back of
the monitor to the blue 15-pin connector on the back of the
computer. Tighten the cable screws to secure the cable to the
connector.
CAUTION:
To avoid damaging the video cable, ensure that the cable
aligns with the 15-pin connector. Do not force the cable onto the
connector.
3-2
Reference Guide