HP DL760 DVD-ROM Drive Installation Instructions for HP ProLiant DL760 Generat - Page 1

DVD-ROM Drive Installation Instructions for HP ProLiant DL760 Generation 2 Servers Overview Use these instructions to install a DVD-ROM drive into an HP ProLiant DL760 Generation 2 server. Warnings and Cautions WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. CAUTION: Properly ground yourself before beginning any installation procedure. Electrostatic discharge can damage electronic components. Tools Needed • Torx T-15 screwdriver Installing the DVD-ROM Drive 1. Remove the media module from the server. a. Power down the server. Refer to the HP ProLiant DL760 Generation 2 Maintenance and Service Guide for detailed instructions. b. Push in the sides of the cam levers on the media module (1) and rotate the top of the levers downward (2). Slide the media module forward (3). Read instructions completely before beginning installation procedure. © 2003 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. DVD-ROM Drive Installation Instructions First Edition (June 2003) Part Number 339392-001 WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. WARNING: To reduce the risk of electric shock or damage to the equipment, disconnect power from the server by unplugging all power cords from the server. 339392- 001 HP CONFIDENTIAL Writer: Anna Roberts/Melinda LeBoeuf Codename:Pioneer Part Number: 339392-001 Last Saved On: 5/21/03 2:57 PM