HP Dc5700 Computer Setup (F10) Utility Guide - dc5700 Models - Page 18
Bus Options, Device Options, Num Lock, S5 Wake on LAN, Disable, Security, Device Security
UPC - 882780819535
View all HP Dc5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Table 6 Computer Setup-Advanced (for advanced users) (continued) Bus Options On some models, allows you to enable or disable: ● PCI SERR# generation. ● PCI VGA palette snooping, which sets the VGA palette snooping bit in PCI configuration space; only needed when more than one graphics controller is installed. Device Options Allows you to set: ● Printer mode (Bi-Directional, EPP + ECP, Output Only). ● Num Lock state at power-on (off/on). ● S5 Wake on LAN (enable/disable). ● To disable Wake on LAN during the off state (S5), use the arrow (left and right) keys to set the S5 Wake on LAN feature to Disable. This obtains the lowest power consumption available on the computer during S5. It does not affect the ability of the computer to Wake on LAN from suspend or hibernation, but will prevent it from waking from S5 via the network. It does not affect operation of the network connection while the computer is on. ● If a network connection is not required, completely disable the network controller (NIC) by using the arrow (left and right) keys to select the Security > Device Security menu. Set the Network Controller option to Device Hidden. This prevents the network controller from being used by the operating system and reduces the power used by the computer in S5. ● Processor cache (enable/disable). ● Integrated Video (enable/disable) Allows you to use integrated video and PCI Up Solution video at the same time (available on some models only). ● Internal speaker (some models) (enable/disable) (does not affect external speakers) ● Monitor Tracking (enable/disable). Allows BIOS to save monitor asset information. ● NIC PXE Option ROM Download (enable/disable). The BIOS contains an embedded NIC option ROM to allow the unit to boot through the network to a PXE server. This is typically used to download a corporate image to a hard drive. The NIC option ROM takes up memory space below 1MB commonly referred to as DOS Compatibility Hole (DCH) space. This space is limited. This F10 option will allow users to disable the downloading of this embedded NIC option ROM thus giving more DCH space for additional PCI cards which may need option ROM space. The default will be to have the NIC option-ROM-enabled. 12 Computer Setup (F10) Utility ENWW