HP Designjet 9000s Service Manual - Page 79

Maintenance Mode PH. MAIN (Printhead Maintenance) This menu contains the necessary options related to the actual Printheads contained in the Carriage Assembly, like cleaning or servicing. The different options available in this menu are as follows: „ Charge Ink System ⇒ Page 4-23. „ Purge Ink System ⇒ Page 4-25. „ Ink System Options: - Store Ink System ⇒ Page 4-27. - Clean Ink System ⇒ Page 4-33. „ Ink Charge Done ⇒ Page 4-42. „ Printhead Recovery ⇒ Page 4-42. „ Uncap Carriage ⇒ Page 4-43. „ Cap Carriage ⇒ Page 4-43. To enter in to the Printhead Maintenance menu, enter in to the Maintenance Mode and press the T key. Press the Down Arrow Key to select SP. ADJ WPH. ADJ PH. MAINT Charge Ink System This option allows you to charge the complete ink system (e.g. when the Ink Tubes are empty) or individual inks (e.g. after replacing a Printhead): 1 In the Printhead Maintenance submenu, scroll to "Charge Ink Sys" and press the OK key. # CHARGE INK SYS > ALL 2 In the Charge Ink System submenu, select whether you would like to charge the complete Ink System, part of the Ink System or individual inks and then press the OK key. # CHARGE INK SYS * ALL The different options available in this submenu are as follows: „ ALL - Charges the complete Ink System. „ Left (K, Lm, Lc) - Charges the Black, Light Magenta and Light Cyan inks. „ Right (Y, M, C) - Charges the Yellow, Magenta and Cyan inks. „ K - Charges the Black ink. HP Designjet 9000s Series Printer Service Manual 4-23