HP Dv2910us Drives - Windows Vista - Page 11
Removing an optical disc when running on battery or external power
 |
UPC - 884420154242
View all HP Dv2910us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Removing an optical disc when running on battery or external power 1. Press the release button (1) on the drive bezel to release the media tray, and then gently pull out the tray (2) until it stops. 2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. 3. Close the media tray and place the disc in a protective case. Removing an optical disc when running on battery or external power 5
-
1 -
2
-
3
-
4
-
5
-
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17
-
18
 |
 |
Removing an optical disc when running on battery or
external power
1
.
Press the release button
(1)
on the drive bezel to release the media tray, and then gently pull out the
tray
(2)
until it stops.
2
.
Remove the disc
(3)
from the tray by gently pressing down on the spindle while lifting the outer edges
of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:
If the tray is not fully accessible, tilt the disc carefully as you remove it.
3
.
Close the media tray and place the disc in a protective case.
Removing an optical disc when running on battery or external power
5