HP Dx2250 Computer Setup (F10) Utility Guide - Page 11

Computer Setup F10 Utilities, Computer Setup-Standard CMOS Features continued

Page 11 highlights

Table 3 Computer Setup-Standard CMOS Features (continued) SATA Ch 1 Master For each, allows you to: SATA Ch 1 Slave ● run HDD self-test for selected channel: SATA Ch 2 Master ● SMART Status Check SATA Ch 2 Slave ● HDD Short Self-Test ● HDD Extended Self-Test ● set extended IDE drive on selected channel to: ● None ● Auto ● set access mode on selected channel to: ● Large ● Auto ● view: ● Firmware Version ● Capacity ● Cylinder ● Head ● Precomp ● Landing Zone ● Sector Floppy Controller Disables/enables the floppy disk controller. Drive A Allows you to set Drive A to: ● None ● 1.44M, 3.5 in. Halt On Allows you to set POST error behavior to: ● All Errors ● No Errors ● All but Keyboard ● All but Diskette ● All but Diskette/Keyboard POST Delay Allows you to set a POST delay to: ● 0 seconds ● 5 seconds ● 10 seconds ENWW Computer Setup (F10) Utilities 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

SATA Ch 1 Master
SATA Ch 1 Slave
SATA Ch 2 Master
SATA Ch 2 Slave
For each, allows you to:
run HDD self-test for selected channel:
SMART Status Check
HDD Short Self-Test
HDD Extended Self-Test
set extended IDE drive on selected channel to:
None
Auto
set access mode on selected channel to:
Large
Auto
view:
Firmware Version
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Floppy Controller
Disables/enables the floppy disk controller.
Drive A
Allows you to set Drive A to:
None
1.44M, 3.5 in.
Halt On
Allows you to set POST error behavior to:
All Errors
No Errors
All but Keyboard
All but Diskette
All but Diskette/Keyboard
POST Delay
Allows you to set a POST delay to:
0 seconds
5 seconds
10 seconds
Table 3
Computer Setup—Standard CMOS Features (continued)
ENWW
Computer Setup (F10) Utilities
5