HP ENVY x2 - 15t-c000 HP ENVY x2 Detachable PC Maintenance and Service Guide - Page 44
Audio/SD board, Disconnect the cable from the system board
View all HP ENVY x2 - 15t-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Audio/SD board Description Audio/SD board (includes cable) Spare part number 783102-001 Before removing the audio/SD board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard base (see Connecting the tablet to the keyboard base on page 28). 5. Remove the rear cover (see Rear cover on page 29). 6. Disconnect the battery cable from the system board. To remove the audio/SD board: 1. Disconnect the cable from the system board (1). 2. Remove the three Phillips PM2.5×5.0 screws (2) that secure the board to the tablet. 3. Lift the audio/SD board and cable from the tablet (3). Reverse this procedure to install the audio/SD board. 34 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts