HP ENVY x2 - 15t-c000 HP ENVY x2 Detachable PC Maintenance and Service Guide - Page 56
Power button board
View all HP ENVY x2 - 15t-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Power button board Description Power button board (includes cable) Spare part number 783101-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard base (see Connecting the tablet to the keyboard base on page 28). 5. Remove the rear cover (see Rear cover on page 29). 6. Remove the battery (see Battery on page 35). 7. Remove the heat sink (see Heat sink on page 38). Remove the power button board: 1. Disconnect the power button board cable from the reverse ZIF connector on the system board (1). 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the board to the tablet. 3. Slide the board to the right to remove it from under the tab (3), and then remove the board and cable from the tablet (4). Reverse this procedure to install the power button board. 46 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts