HP EliteBook 8770w HP Notebook Hard Drives & Solid State Drives Identifyi - Page 2

Identifying, Preventing, Diagnosing, and Recovering from, Drive Failures - specifications

Page 2 highlights

Identifying, Preventing, Diagnosing, and Recovering from Drive Failures Introduction With each new generation of hard drives, manufacturers make significant improvements to the drive's susceptibility to shock events. However, hard drives are fragile, and if they are exposed to shock events beyond their specifications, they can fail. This white paper explains how companies and users can reduce the risk of hard drive failures. These measures include enhanced hard drive diagnostics, Intel Storage Matrix Technology, HP 3D drive guard, firmware updates, and more. The following sections explain how to identify and prevent hard drive (HDD) and Solid State Drive (SSD) failures. Symptoms of Hard Drive Issues The symptoms of hard drive issues can be traced to connector issues, shock events, software issues, and more. The following sections summarize some of these: Connector issues It is important to check the physical connector that extends from the hard drive to the system board. A hard drive that is not detected by the BIOS or operating system may need adjustment. Note: The following information is not applicable to Solid State Drives. In the event of an apparent SSD failure, the HP Diagnostics should be run. Symptoms of an apparent failure may include the following: • The SSD drive is no longer recognized by the notebook. • You receive an error message during Power On Self-Test (POST) that says "Imminent drive failure." • Your notebook spontaneously restarts when the Windows OS is running. Shock events Shock events can cause read/write head misalignment, or contact between the read/write heads and the media, resulting in symptoms such as a clicking noise, the failure to complete servo, and/or an inaccessible boot device message. Typically, these symptoms result from a significant bump or drop, due to the following factors: • Non-operational shock (when the notebook is turned off) -or- • Operational shock (when the unit is turned on and the hard drive is reading or writing data) Shock events may cause different error messages to be displayed such as "Non-system disk" or "No boot device". Software issues Some hard drive performance problems mimic hard drive failure, but are often caused by software issues. These include (but are not limited to): • Viruses • Application, and/or operating system (OS) bugs • File corruption • File fragmentation Page 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Page 2
Identifying, Preventing, Diagnosing, and Recovering from
Drive Failures
Introduction
With each new generation of hard drives, manufacturers make significant improvements to the drive’s
susceptibility to shock events. However, hard drives are fragile, and if they are exposed to shock
events beyond their specifications, they can fail.
This white paper explains how companies and users can reduce the risk of hard drive failures. These
measures include enhanced hard drive diagnostics, Intel Storage Matrix Technology, HP 3D drive
guard, firmware updates, and more. The following sections explain how to identify and prevent hard
drive (HDD) and Solid State Drive (SSD) failures.
Symptoms of Hard Drive Issues
The symptoms of hard drive issues can be traced to connector issues, shock events, software issues,
and more. The following sections summarize some of these:
Connector issues
It is important to check the physical connector that extends from the hard drive to the system board.
A
hard drive that is not detected by the BIOS or operating system may need adjustment.
Note
: The following information is not applicable to Solid State Drives.
In the event of an apparent
SSD failure, the HP Diagnostics should be run.
Symptoms of an apparent failure may include the
following:
The SSD drive is no longer recognized by the notebook.
You receive an error message during Power On Self-Test (POST) that says "Imminent
drive failure."
Your notebook spontaneously restarts when the Windows OS is running.
Shock events
Shock events can cause read/write head misalignment, or contact between the read/write heads and
the media, resulting in symptoms such as a clicking noise, the failure to complete servo, and/or an
inaccessible boot device message.
Typically, these symptoms result from a significant bump or drop, due to the following factors:
Non-operational shock (when the notebook is turned off)
–or–
Operational shock (when the unit is turned on and the hard drive is reading or writing data)
Shock events may cause different error messages to be displayed such as “Non-system disk” or “No
boot device”.
Software issues
Some hard drive performance problems mimic hard drive failure, but are often caused by software
issues. These include (but are not limited to):
Viruses
Application, and/or operating system (OS) bugs
File corruption
File fragmentation