HP En3700 HP Jetdirect en3700 - (English) User Guide - Page 16

Useful Techniques, Printing a configuration Setting a new IP address - jetdirect reset ip

Get HP En3700 - JetDirect Print Server PDF manuals and user guides
UPC - 808736742955
View all HP En3700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Chapter 3 Configuring and managing the print server on your network • DLC/LLC: Can be enabled or disabled; otherwise there are no parameters to set on the Jetdirect module. • AppleTalk: Printer Name and Printer Zone parameters can be set up using the HP LaserJet Utility for MacOS. • SNMP: (Simple Network Management Protocol) used with your configuration and management tools. The Jetdirect-specific MIB (Management Information Base) is MIB-II compliant; it is available upon request from HP Support. Useful Techniques • Printing a configuration page • Setting a new IP address • Resetting to factory-default settings Printing a configuration page Briefly press and release the test button on the rear end of the print server. The page should soon emerge from the attached printer. Refer to "Interpreting the configuration page and diagnosing problems" in chapter 4, Troubleshooting. Setting a new IP address The procedure depends on whether you are changing the address to one on the same network or on another network (and need to ensure the address doesn't conflict on the new network). 3-4 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
3-4
User Guide
Chapter 3
Configuring and managing the print server on your network
•
DLC/LLC:
Can be enabled or disabled; otherwise there are no parameters to set on
the Jetdirect module.
•
AppleTalk:
Printer Name and Printer Zone parameters can be set up using the HP
LaserJet Utility for MacOS.
•
SNMP:
(Simple Network Management Protocol) used with your configuration and
management tools. The Jetdirect-specific MIB (Management Information Base) is
MIB-II compliant; it is available upon request from HP Support.
Useful Techniques
•
Printing a configuration page
•
Setting a new IP address
•
Resetting to factory-default settings
Printing a configuration page
Briefly press and release the test button on the rear end of the print server. The page
should soon emerge from the attached printer. Refer to “Interpreting the configuration
page and diagnosing problems” in chapter 4, Troubleshooting.
Setting a new IP address
The procedure depends on whether you are changing the address to one on the same
network or on another network (and need to ensure the address doesn’t conflict on the
new network).