HP En3700 HP Jetdirect en3700 - (English) User Guide - Page 18
Performing a cold reset to factory defaults, User Guide
UPC - 808736742955
View all HP En3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 3 Configuring and managing the print server on your network Performing a cold reset (to factory defaults) Once you configure the print server, the configuration settings are retained in memory unless you manually reset them to factory defaults, as follows: 1. Unplug the power module from the back of the print server. 2. While holding down the test button on the back of the print server, plug the power module back into the print server and continue to hold down the test button for about five seconds. Any user-configured settings will be erased. 3-6 User Guide
3-6
User Guide
Chapter 3
Configuring and managing the print server on your network
Performing a cold reset (to factory defaults)
Once you configure the print server, the configuration settings are retained in memory
unless you manually reset them to factory defaults, as follows:
1.
Unplug the power module from the back of the print server.
2.
While holding down the test button on the back of the print server, plug the power
module back into the print server and continue to hold down the test button for
about five seconds. Any user-configured settings will be erased.