HP Envy 13-1030nr HP ENVY 13 - Maintenance and Service Guide - Page 43
that secure the speaker assembly to the base enclosure., Remove the speaker assembly
View all HP Envy 13-1030nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Removal and replacement procedures 4. Disconnect the speaker assembly cable 1 from the system board. 5. Release the speaker assembly cable 2 from the clips and routing channel built into the base enclosure. 6. Remove the two Phillips PM2.0×5.0 screws 3 that secure the speaker assembly to the base enclosure. 7. Remove the speaker assembly 4. Reverse this procedure to install the speaker assembly. 4-14 Maintenance and Service Guide
4–14
Maintenance and Service Guide
Removal and replacement procedures
4. Disconnect the speaker assembly cable
1
from the system board.
5. Release the speaker assembly cable
2
from the clips and routing channel built into the base enclosure.
6. Remove the two Phillips PM2.0×5.0 screws
3
that secure the speaker assembly to the base enclosure.
7. Remove the speaker assembly
4
.
Reverse this procedure to install the speaker assembly.