HP Envy 15-1000 HP ENVY 15 - Maintenance and Service Guide - Page 70
Remove the system board, by sliding it up and to the left at an angle.
View all HP Envy 15-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Removal and replacement procedures 4. Remove the four Phillips PM2.0×4.0 screws 1 that secure the system board to the base enclosure. 5. Lift the left side of the system board 2 until it rests at an angle. 6. Remove the system board 3 by sliding it up and to the left at an angle. Reverse this procedure to install the system board. 4-32 Maintenance and Service Guide
4–32
Maintenance and Service Guide
Removal and replacement procedures
4. Remove the four Phillips PM2.0×4.0 screws
1
that secure the system board to the base enclosure.
5. Lift the left side of the system board
2
until it rests at an angle.
6. Remove the system board
3
by sliding it up and to the left at an angle.
Reverse this procedure to install the system board.