HP Envy 15-1000 HP ENVY 15 - Maintenance and Service Guide - Page 73
Remove the Phillips PM2.0×3.0 screw, Release the ambient light sensor module
View all HP Envy 15-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removal and replacement procedures 5. If it is necessary to replace the Bluetooth module: a. Release the Bluetooth module 1 from the rubber clip built into the display enclosure. b. Disconnect the Bluetooth module cable 2 from the Bluetooth module. c. Remove the Bluetooth module. The Bluetooth module is available using spare part number 537921-001. 6. If it is necessary to replace the ambient light sensor module: a. Remove the Phillips PM2.0×3.0 screw 1 that secures the ambient light sensor module to the display enclosure. b. Release the ambient light sensor module 2 as far as the ambient light sensor module cable allows. c. Disconnect the ambient light sensor module cable 3 from the ambient light sensor module. d. Remove the ambient light sensor module. The ambient light sensor module and cable are available using spare part number 576815-001. Maintenance and Service Guide 4-35