HP Integrity Superdome 2 16-socket HP Integrity Superdome 2 Onboard Administra - Page 31
Location errors, Configuration errors, Device failure errors, Onboard Administrator modules
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1. Use the arrow buttons to navigate to Fix This, and press OK. 2. Review and complete the corrective action suggested by the Insight Display. In most cases, you must either add fans to the enclosure, correct the fan configuration, or remove the indicated components. Location errors Location (installation) errors occur when the component is not installed in the appropriate bay. Location errors can occur on server blades, storage blades, power supplies, and fans. To correct a location error: 1. Use the arrow buttons to navigate to Fix This, and press OK. 2. Review and complete the corrective action suggested by the Insight Display. Remove the indicated component, and install it into the correct bay. The Insight Display will indicate the correct bay number. Configuration errors Configuration errors can occur if the interconnect modules are installed in the wrong bays or if mezzanine cards are installed in the wrong connectors in the server blade. Configuration errors can occur on server blades and interconnect modules. To correct a configuration error: 1. Use the arrow buttons to navigate to Fix This, and press OK. 2. Review and complete the corrective action suggested by the Insight Display. Depending on the error received, do one of the following: • Remove the indicated interconnect module, and install it into the correct bay. (The Insight Display indicates the correct bay.) • Remove the server blade to correct the mezzanine card installation. (The Insight Display indicates the correct bay.) For information on installing the mezzanine card, see the server-specific user guide on the Documentation CD. Device failure errors Device failure errors occur when a component has failed. Device failure errors can occur on all components, including: • Server blades • Storage blades • Power supplies • Interconnect modules • Onboard Administrator modules • Fans • ac power inputs To correct a device failure error: 1. Use the arrow buttons to navigate to Fix This, and press OK. 2. Review and complete the corrective action suggested by the Insight Display. In most cases, you must remove the failed component to clear the error. 3. Replace the failed component with a spare, if applicable. NOTE: If the device failure error is an ac power input failure error, then to clear the error, you must have the failed ac input repaired. Insight Display errors 31