HP Integrity Superdome 2 32-socket HP Integrity Superdome 2 Onboard Administra - Page 164
Using the CLI, Command line overview
View all HP Integrity Superdome 2 32-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
10 Using the CLI Command line overview The Onboard Administrator CLI is available from the Onboard Administrator serial port, management port, or service port and provides access to all Onboard Administrator commands and information. The CLI user must provide a valid user name/password to log into Onboard Administrator. The CLI is available for both local user accounts and LDAP users. Two-Factor Authentication is not available for the CLI. Access to the Onboard Administrator CLI from either the Onboard Administrator Ethernet management port or service port requires that Telnet or Secure Shell protocols are enabled on the Onboard Administrator. The Onboard Administrator serial port must be used for Onboard Administrator lost password recovery. The Onboard Administrator serial port speed is fixed at 9600, N, 8, 1. For more information about the CLI, see the HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide. 164 Using the CLI