HP Integrity Superdome 2 8/16 Cisco Nexus B22 Fabric Extender for HP Getting S - Page 5

Installing the Cisco Nexus B22 Fabric Extender for HP Installing the Cisco Nexus B22 Fabric Extender for HP Caution Properly ground yourself before handling the switch. Populate all the enclosure interconnect bays with an interconnect module or one of the blank panels provided with the enclosure. For the HP Integrity Superdome 2, the Fabric Extender will go to Bay 1, Bay 2 or both. To install the Cisco Nexus B22 Fabric Extender for HP in the enclosure: 1. Locate the appropriate interconnect bay at the rear of the enclosure. See the setup and installation guide provided with the enclosure. 2. Press the handle latch to release the handle. See Figure 4. Figure 4 Releasing the Installation Handle 1 2 scale: 2/3" = 1" 310167 20 19 18 17 ! 3 1 Installation handle in latched position 2 Handle latch 3 Installation handle (released) Note The Cisco Nexus B22 Fabric Extender for HP is a hot-pluggable device. The enclosure may be on or off during installation. 3. Align the Cisco Nexus B22 Fabric Extender for HP with the appropriate interconnect bay, according to the specific configuration for the enclosure. For the HP Integrity Superdome 2, use bay-1, bay-2 or both. Push the switch firmly into the interconnect bay. See Figure 5. Cisco Nexus B22 Fabric Extender for HP Getting Started Guide 5