HP Integrity Superdome 2 8/16 HP Smart Update Manager 5.1 User Guide - Page 42

Linux smart-component return codes Single-target servers: Error level 0 1 2 3 Multi-target servers: Error level 0 1 2 3 4 5 6 7 Linux RPM return codes Error level 0 1 Meaning The smart component was installed successfully. The smart component was installed successfully, but the system must be restarted. The installation was not attempted because the required hardware is not present, the software is current, or there is nothing to install. The smart component was not installed. For more information, see the log file. Meaning The installation of the deliverable was successful. No reboot is required. The installation of the deliverable was successful. Reboot is required for the deliverable to be enabled. The installation was not attempted because the version to be installed matches the version already installed. The installation was not attempted because of one of the following: • The version to be installed is older than the version already installed. • The supported hardware is not present, not enabled, or in a state that an installation could not be attempted. • The smart component does not support the environment. • There is nothing for the component to accomplish. If the component is being installed to a remote target, such as an OA or other network-based deployment, this return code indicates that the target cannot be found. A user canceled the installation before anything could be installed. The installer cannot run because of an un-met dependency or installation tool failure. The actual installation operation (not the installation tool) failed. Meaning The Linux RPM installation was successful. The Linux RPM installation failed. 42 Using scripts to deploy updates