HP Integrity rx1620 Windows Integrity Management Agents Reference - Page 78
OS or Software is calling SAL_MC_RENDEZ, Software is making a SAL_MC_RENDEZVOUS
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
5619 5621 5622 5623 5626 5638 5646 5655 5656 5657 5658 5659 5677 5679 5682 5683 5684 5685 See earlier error event. See earlier error event. Utilities may be unavailable to update the profiles. Check the connections are reset. Run parmgr to configure the cell into a PD and reset the PD or add the cell. Rearrange the DIMMs to follow the loading order The current DIMM loading order does not follow specified in the Maintenance and Operation the guidelines in the user manual Manual PD Rendezvous Boot Rules: If greater than 50% of the assigned cells are rendezvoused, we will boot. If less than 50% of the assigned cells are rendezvoused, don't boot. If exactly 50% of the assigned cells are rendezvoused, including all of the preferred core cells, we will boot. If exactly 50% have rendezvoused, and there is a specified preferred core cell not rendezvoused, don't boot. If exactly 50% have rendezvoused, and there are no preferred core cells, don't boot. If any of the above apply in preventing the boot. Reconfigure the PD and reboot. A processor has failed rendezvous. Reboot if necessary, if problem persists contact your HP representative for support. SFW's Machine Check Handler was unable to log Reboot if necessary, if problem persists contact or clear I/O error registers. your HP representative for support. Cannot escalate an MCA to BERR. Analyze Machine Check Logs using diagnostic tools and EFI tools. Cannot escalate an MCA to BINIT. Analyze Machine Check Logs using diagnostic tools and EFI tools. SFW failed to get the feature set from PAL Update firmware to get newer PAL that support the PAL_GET_FEATUREs call. Review error logs to determine cause of MCA. If PAL Failed to rendezvous the processors during problem persists, contact HP support to a MCA. troubleshoot the problem. SFW failed to set the feature set from PAL. update newer system firmware with the new PAL that support the PAL_SET_FEATURES call. A slave failed to rendezvous. Reboot if necessary, if problem persists contact your HP representative for support. A bad rendezvous vector has been registered. Reboot if necessary to re-register vector, if problem persists contact your HP representative for support. Software is making a SAL_MC_RENDEZVOUS call when it shouldn't. Just a warning that software or OS is making a call when it shouldn't. SFW will ignore the call when this happen. Need to fix OS or software to not make the SAL_MC_RENDEZVOUS when there is no monarch processor chosen. OS or Software is calling SAL_MC_RENDEZ without registering a method to wake-up the processor. OS or Software needs to be fixed to register a wake-up mechanism before calling SAL_MC_RENDEZ. Update SFW with contain a new PAL that PAL does not support the call to escalate further support this feature. If no new PAL that support local MCA to global MCA. this feature, no action should be taken further. PAL does not support call to get the processor Update system firmware with a new PAL that feature set during processor rendezvous. support the PAL_GET_FEATURES call. 78 Management Agents Event Tables