HP Jetdirect 610n HP Jetdirect 200m Print Server - (English) Administrator Gui - Page 150

To add an entry into the access control list, use the IP Address and Mask fields to specify a host, and click (check) the Save checkbox for that entry. Then click Apply. To delete an entry from the list, clear the Save checkbox for that entry. Then click Apply. To clear the entire access control list, clear all Save checkboxes, and click Apply. Mgmt. Protocols This link provides access to management communications and other protocols that affect security. Web Mgmt. Use this tab to manage communications with the embedded Web server from Web browsers. This tab appears only for full-featured print servers. By default, the embedded Web server provides encrypted communications through port 443, the well-known port for HTTPS (secure HTTP) traffic. Although ports 80, 280, or 631 continue for IPP (Internet Printing Protocol) use, other non-secure communications are ignored. Although not recommended, you may choose to accept both HTTPS and HTTP communications that are not secure by disabling (clearing) the Encrypt All Web Communication checkbox. To support the use of HTTPS communications, a Jetdirect certificate must be installed. A factory-default, self-signed certificate is preinstalled for initial use. Click the Configure button to update the preinstalled certificate, or to install a new one. For more information, see Configuring Certificates. Encryption strength must be specified when using a Jetdirect certificate. You may select Low (default), Medium, or High encryption strength. For each encryption strength, ciphers are specified to identify the weakest cipher allowed. Early browsers may only support 40-bit (Low) encryption levels. ENWW Using the Embedded Web Server 150