HP Jetdirect 640n HP Jetdirect Print Servers 640n and 695n - Administrator's G
HP Jetdirect 640n Manual
View all HP Jetdirect 640n manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Jetdirect 640n manual content summary:
- HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 1
HP Jetdirect Print Servers Administrator's Guide HP Jetdirect Firmware V.45 J8025A (640n) J8024A (695n) - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 2
- HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 3
HP Jetdirect Print Servers Administrator's Guide (Firmware V.45.xx.nn) - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 4
such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Edition 12, 10/2012 Trademark Credits Microsoft, Windows, Windows Server, Windows 7, Windows 8, Windows - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 5
the HP Jetdirect print server ...1 Supported print servers ...1 Supported network protocols ...2 Security protocols ...3 SNMP (IP and IPX) ...3 HTTPS ...3 Authentication ...3 EAP/802.1X port-based authentication 3 IPsec/Firewall ...4 Supplied manuals ...4 HP support ...5 HP online support - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 6
configuration ...18 Server-based and manual TCP/IP configuration BOOTP/TFTP 22 Configure the print server using BOOTP/TFTP on UNIX HP Embedded Web Server 61 Use the printer control panel ...61 4 HP Embedded Web Server (V.45.xx.nn.xx 63 Requirements ...64 Compatible Web browsers 64 Supported HP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 7
View the HP Embedded Web Server 64 Operating notes ...66 HP Jetdirect Home tab ...66 Device tabs ...67 Networking ...83 Other Settings ...85 Misc. Settings ...85 Firmware Upgrade 87 LPD Queues ...87 Support Info ...90 Refresh Rate ...90 Select Language ...90 Security: Settings ...90 Status ...90 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 8
125 Reset to factory defaults ...126 Example: Cold reset using the service menu 126 Disable an HP Jetdirect embedded print server (V.45.xx.nn.xx 128 General troubleshooting ...129 Troubleshooting chart - assess the problem 129 Procedure 1: Verify the printer is on and online 130 Procedure - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 9
messages ...152 HP Jetdirect Security page ...159 Security settings ...160 IPsec Error Log ...162 Local IP addresses ...162 IPsec Statistics ...162 IKE Stats ...163 IPsec Rules ...163 IPsec Security Associations (SA) table 164 Available Network Services 164 Appendix A LPD printing ...165 About - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 10
174 Appendix B FTP printing ...175 Requirements ...175 Print files ...175 Use FTP printing ...175 FTP connections ...175 Control connection 175 Data connection 176 FTP login ...176 End the FTP session ...177 Commands ...177 Example FTP Session ...178 Appendix C HP Jetdirect control panel menus - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 11
in this manual. Table 1-1 Supported HP Jetdirect print server features and capabilities Model Product Number Printer Connect Network Connect1 Network Protocols and Features2 Firmware Version3 640n J8025A EIO 10/100/1000T Full (includes IPsec) V.45.xx.nn.xx.nn 695n J8024A EIO Full - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 12
Windows Server 2008, Windows Server 2012, Windows Vista, Windows 7, Windows 8. (Requires HP IPv6/ IPv4 port monitor software running on the system.) J8024A (695n) and J8025A (640n) LPR/LPD RFC 1179 compliant systems with IPv6 client support IPP systems with IPv6 client support FTP printing IPX - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 13
authentication results. When using an 802.1X connection, the print server supports EAP with an authentication server, such as a remote authentication dial-in user service (RADIUS, RFC 2138) server. Full-featured HP Jetdirect print servers support the following EAP/802.1X methods: ● PEAP (protected - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 14
your HP Jetdirect print server, see the following manuals: ● Start or use guides, or equivalent printer documentation (shipped with printers that have factoryinstalled HP Jetdirect print servers). ● This manual, the HP Jetdirect Print Server Administrator's Guide for the applicable HP Jetdirect - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 15
HP support HP online support Visit the HP Web site 24 hours a day, 7 days a week at: www.hp.com/support/net_printing Firmware upgrades Full-featured HP Jetdirect print servers support firmware upgrades of new or enhanced features. If a firmware upgrade is available for your print server model, you - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 16
toll-free support in the USA and Canada, call 1-800-HPINVENT or 1-800-474-6836. Telephone fees are the responsibility of the caller. Rates can vary. Contact your local telephone company for current rates. Product registration To register your HP Jetdirect print server, use the following HP Web page - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 17
-server (shared) printing. Simple printer setup and installation. You can download and install a version that runs from your hard disk from the HP Web site. NOTE: Printer software drivers are not included and must be obtained separately. HP Jetdirect Printer Installer for UNIX (see HP Jetdirect - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 18
over the Internet, replacing fax, mail, and overnight services. ● Requires HP Jetdirect print server firmware version x.20.00 or later. 1 Supports queue creation and peripheral management from HP Web Jetadmin hosted on a supported system. HP Install Network Printer Wizard (Microsoft Windows) The - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 19
connection to the network through an HP Jetdirect print server HP Jetdirect Printer Installer for UNIX The HP Jetdirect Printer Installer for UNIX supports HP-UX and Solaris systems. The software installs, configures, and provides diagnostics capabilities for HP printers connected to TCP/IPv4 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 20
your printer. Remove HP Web Jetadmin software To remove HP Web Jetadmin software from your Web server, use the uninstall program provided with the software package. Internet Printer Connection software (For full-featured print servers only) HP Jetdirect print servers support IPP and Secure IPP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 21
NOTE: Contact Microsoft for support of Windows IPP software. Microsoft Windows XP/Windows Server 2003 or 2008 integrated software You can use the IPP client software integrated with the Microsoft Windows system. The IPP implementation on the HP Jetdirect print server is compatible with the Microsoft - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 22
Novell-supplied software The HP Jetdirect print server is compatible with IPP running on NetWare 5.1 with SP1 or later. For NetWare client support, see your NetWare technical documentation or contact Novell. Mac OS network installation Software tools Use the following Mac OS software tools: NOTE: - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 23
. 3. In the Printer field, select the printer and then click the Print button. If the printer prints the job, you have connected your printer to your network correctly. If your printer does not print, see Troubleshoot the HP Jetdirect print server on page 125. ENWW Mac OS network installation 13 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 24
14 Chapter 2 HP software solutions summary ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 25
the same as in previous HP Jetdirect products. IPv6 configuration HP Jetdirect print servers provide basic configuration capabilities for operation on an IPv6 network. For IPv6 printing services, the print server supports the following: ● IP printing (raw) using HP-proprietary TCP port 9100 ● LPD - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 26
-supported system or router. IPv6 address configuration Most print server addresses are automatically configured in accordance with the IPv6 standards. If necessary, the print server allows manual entry of an IPv6 address by using the printer control panel or the HP Embedded Web Server. If the print - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 27
configuration beyond that provided by a router is necessary, such as a domain name or DNS server addresses. Use DNS HP Jetdirect print servers support the configuration of IPv6 DNS servers for the print server. Due to IPv6 address length and complexity, specifying an IPv6 address in applications to - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 28
must support direct IPv6 addressing as a URL. For detailed information on these and other tools, see your system documentation and help. IPv4 configuration This section provides specific IPv4 configuration information for HP Jetdirect print servers on a TCP/ IPv4 network. Server-based and manual TCP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 29
is turned off, and then turned on. You can configure the print server to use either server-based or manual configuration of TCP/IP settings at any time. To identify the print server's configured IP address, see the HP Jetdirect configuration page. Default IP address (IPv4) When in a factory-default - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 30
enabled, allowing transmission of DHCP requests. To disable this parameter, use a supported configuration tool such as Telnet, a Web browser, or SNMP management applications. When an HP Jetdirect Wireless Print Server in a factory default state (without a network connection) is initially turned on - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 31
Embedded Web Server Use the HP Embedded Web Server on the HP Jetdirect print server to set configuration parameters. For more information, see HP Embedded Web Server (V. 45.xx.nn.xx) on page 63. ● Printer control panel (For printers that support HP Jetdirect control panel menus.) Manually enter the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 32
Microsoft DHCP services (see Use DHCP (IPv4) on page 36). However, Microsoft Windows Server 2003 and Windows Server 2008 systems might require third-party software for TFTP support. For setup of NetWare BOOTP servers, see the NetWare documentation. NOTE: If the HP Jetdirect print server and BOOTP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 33
(NIS) If your system uses NIS, you might need to rebuild the NIS map with the BOOTP service before performing the BOOTP configuration steps. See your system documentation. Configure the BOOTP server For the HP Jetdirect print server to obtain its configuration data over the network, the BOOTP/TFTP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 34
the host name to the HP Jetdirect print server. The host name is printed on the HP Jetdirect configuration page, or returned on an SNMP sysName request by a network application. 15 Domain name. Specify the domain name for the HP Jetdirect print server (for example, support.hp.com). It does not - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 35
. Specify a port number and option, as in the following example: : For supported HP Jetdirect print servers, the default port number is 1. : Set to 0 (default) to disable interlock, or 1 to enable. For example, setting this to "1 1" specifies - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 36
commands. This table describes the TFTP command parameters supported by HP Jetdirect print servers. (Optional commands for the same function are network or device administrator (SNMP sysContact object) who administers or services the printer. Enter up to 64 alphanumeric characters. The default - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 37
of the LAN hardware address. ip-config: Print server configuration method. Use the following values: ◦ manual: Wait for IP parameters using manual tools, such as Telnet, the HP Embedded Web Server, the control panel, or installation/management software. Status is User Specified. ◦ bootp: Send BOOTP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 38
.168.40.1 is the IP address of the default gateway. NOTE: If the HP Jetdirect print server is configured by DHCP and you manually change the subnet mask or the default gateway address, you should also change the print server's IP address. This releases the assigned DHCP address back to the DHCP IP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 39
an acknowledgement (ACK) on all TCP packets before allowing the printer to close a port 9100 print connection. Specify a port number and the parameter value. For current HP Jetdirect print servers, the port number is 1. For example, interlock 1 1 specifies port 1 and enable interlock. 0 (default - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 40
identify the source of selected messages during troubleshooting. By default, the HP Jetdirect print server uses LPR as the source facility code. Use values of local0 through local7 to isolate individual or groups of print servers. slp-config: Use the service location protocol (SLP) operation on the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 41
parameters (continued) slp-keep-alive: Number of minutes the print server waits between sending multicast packets on the network to prevent tables because of network inactivity. 0: Disable. slp-client-mode: Use the service location protocol (SLP) to locate and install printers on the network. 0 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 42
that an idle print data connection is allowed to remain open. The range is 1 to 3600 seconds. Since the card supports only a single HP Embedded Web Server on the print server. 0: Disable. 1 (default): Enable. tcp-mss: (or subnets-local:) Maximum segment size (MSS) that the HP Jetdirect print server - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 43
print server is unable to obtain an IP address from the network during a forced TCP/IP reconfiguration. For example, when turned off and then on or when manually which SNMP GetRequests the HP Jetdirect print server responds to. If a Get community name is set, the print server responds to either a - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 44
: Name of the Novell directory services (NDS) tree for this printer. ipx-nds-context: NDS context for the HP Jetdirect print server. Enter up to 256 alphanumeric characters. ipx-job-poll: Time in seconds that the HP Jetdirect print server waits to check for print jobs in a print queue. The range is - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 45
the detected link speed of the hub/switch port. (A 1000T half-duplex selection is not supported.) upgrade: Set the name and location of a firmware upgrade file for the HP Jetdirect print servers. CAUTION: Ensure that command parameters are properly entered. Verify that the upgrade file is a higher - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 46
or online help to install or enable DHCP services. If you are configuring an HP Jetdirect wireless print server, this section assumes that a wireless network connection is established. If the HP Jetdirect print server and BOOT/DHCP server are located on different subnets, IP configuration can - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 47
until dynamic domain name services are available. Microsoft Windows systems HP Jetdirect print servers support IP configuration from a supported Microsoft Windows DHCP server. When configured for BOOTP or DHCP operation and turned on, the HP Jetdirect print server automatically sends a BOOTP or - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 48
RARP. 10. If ping does not respond, see Troubleshoot the HP Jetdirect print server on page 125. Use the arp and ping commands (IPv4) You can configure an HP Jetdirect print server with an IP address using the arp command from a supported system. The workstation from which the configuration is made - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 49
arp and ping commands are ignored. To again use arp and ping to configure the IP address, reset the print server to factory values. See Troubleshoot the HP Jetdirect print server on page 125. On UNIX systems, the arp -s command can vary between different systems. Some BSD systems expect the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 50
might not be supported on value-featured print servers. If you are configuring an HP Jetdirect wireless print server, this section print server. (If the print server is configured with a legacy default IP address such as 192.0.0.192, a route normally does not exist.) CAUTION: Using Telnet to manually - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 51
, see Telnet user interface options on page 41. For a list of supported commands and parameters, see Table 3-3 Telnet Commands and Parameters on page 42. Telnet user interface options The HP Jetdirect print server provides two interface options to enter Telnet commands: a Telnet command line - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 52
provided by a BOOTP or DHCP server, you cannot change its value unless you set Manual configuration. See the ip-config command. When you manually set an IP address, you should TFTP. (Only available on systems that support input/output redirection, such as UNIX.) 42 Chapter 3 TCP/IP configuration - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 53
to control changes of HP Jetdirect print server configuration parameters using Telnet, the HP Embedded Web Server, or HP Web Jetadmin. For ns). LONG: Set to a long interval (800 ns). Aggregating 802.11n MAC service data units packs them into frames to reduce overhead and increase the data rate. - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 54
devices through an access point. Ad Hoc: (default) The print server communicates with other wireless devices directly, without using an access point. desired-ssid Service set identifier (SSID), or network name, for the print server. Enter up to 32 alphanumeric characters. The factory-default - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 55
uses for ad hoc network association requests. The default is channel 11. 10: Use channel 10 (2457 MHz). 11: Use Channel 11 (2462 MHz). The print server uses this channel to broadcast its availability if it fails to detect and associate with the specified ad hoc network on any channel. dot11-switch - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 56
digits of the LAN hardware (MAC) address. Print server configuration method. Use the following values: manual: Wait for IP parameters using manual tools, such as Telnet, the HP Embedded Web Server, the control panel, or installation/management software. Status is User Specified. bootp: Send BOOTP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 57
.168.40.1 is the IP address of the default gateway. NOTE: If the HP Jetdirect print server is configured by DHCP and you manually change the subnet mask or the default gateway address, you should also change the print server's IP address. This releases the assigned DHCP address back to the DHCP IP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 58
.support.hp.com). pri-dns-svr IP address of the primary DNS server. sec-dns-svr pri-wins-svr sec-wins-svr IP address of a secondary DNS server to use if the primary DNS server is unavailable. IP address of the primary WINS server. IP address of the secondary WINS server. TCP/IP Print Options - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 59
an acknowledgement (ACK) on all TCP packets before the printer can close a port 9100 print connection. Specify a port number and parameter value. For the HP Embedded Web Server on the HP Jetdirect print server, the default port number is 1. In the following example, the port is 1 and interlock - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 60
messages during troubleshooting. By default, the HP Jetdirect print server uses LPR as the source facility code. Use values of local0 through local7 to isolate individual or groups of print servers. Use the SLP operation on the print server. SLP is used by selected HP software applications (through - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 61
) the print server waits to send multicast packets on the network to prevent deletion from network device tables. Some infrastructure devices, such as switches, delete devices from their device tables due to inactivity on the network. 0: Disable. slp-client-mode 1 to 1440: Enable. Use the service - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 62
Bonjour service to use for printing. Set this parameter using the following values: 1: Port 9100 printing 2: IPP port printing 3: TTL. ipv4-multicast Receive and transmit IP version 4 multicast packets by the print server. 0: Disable. 1 (default): Enable. NOTE: If disabled, other protocols - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 63
. ICMPv4 time stamp requests. 0 (default): Disable 1: Enable ews-config Allow use of the HP Embedded Web Server on the HP Jetdirect print server. 0 Disable. 1 (default): Enable. web-refresh For more information, see HP Embedded Web Server (V.45.xx.nn.xx) on page 63. Time interval for the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 64
even when the print server is statically configured (such as a manually configure IP address, subnet mask and default gateway). 0 Disable. TCP/IP Diagnostics Last Config IP 1 (default): Enable. (Read-only parameter.) IP address of the system from which the HP Jetdirect print server's IP address - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 65
indicate that an SNMP request was received, but the community name check failed. 0 Disable. 1 (default) Enable. Add a host's IP address to the HP Jetdirect print server's SNMP trap destination list. The list can contain up to six entries. To receive SNMP traps, the listed systems must have a trap - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 66
Table 3-3 Telnet Commands and Parameters (continued) ipx-sapinterval Time in seconds that the HP Jetdirect print server waits between service advertising protocol (SAP) broadcasts on the network. Set from 1 to 3600 seconds. 0: Disable. ipx-mode ipx-nds-tree 60 (default): Enable SAP broadcasts. - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 67
HP Jetdirect print server is awaiting data. DISABLED: AppleTalk was manually disabled. DLC/LLC dlc/llc-config INITIALIZING: Print server is registering the node address or name. An additional status message might also be displayed. Use DLC/LLC protocol operation on the print server (if supported - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 68
the network. TXRX or 4: Enable for both received and transmitted data. network-select (For HP Jetdirect products with a dual wired/wireless port. Specifies the active behavior of the print server.) ● Auto (default): Automatically detects whether a network cable is attached. If a network cable is - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 69
or an intranet. tech-support-url Web URL address for technical support over the Internet or an intranet. Menu Interface An optional Menu interface is displayed when you type the menu command during a Telnet session with the HP Jetdirect print server. The Menu interface provides structured - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 70
SNMP Menu... 4. IPX/SPX Menu 5. AppleTalk Menu 6. DLC/LLC Menu 7. Other Settings 8. Support Settings 9. Wireless Settings ?. Help e. Exit Menu 0. Exit Telnet Enter Selection => 2 TCP/IP press Enter to exit Telnet. 3. Turn the print server off and then on. 60 Chapter 3 TCP/IP configuration ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 71
and configure another address after it is installed. See Troubleshoot the HP Jetdirect print server on page 125 for instructions to reset the print server to factory default settings. NOTE: If you use an HP Jetdirect wireless print server, this section assumes that a wireless network connection is - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 72
TCP/IP parameters not available from the control panel configuration, use an alternate configuration tool, such as Telnet/IPv4 or the HP Embedded Web Server. If the HP Jetdirect print server is configured with TCP/IP parameters from the printer control panel, the configuration is saved on the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 73
Networking tab is displayed and controlled by the HP Jetdirect print server. A typical Networking tab displayed by the HP Jetdirect print server is shown in Figure 4-1 HP Jetdirect Networking Tab on page 63. Figure 4-1 HP Jetdirect Networking Tab For network parameter descriptions, see "Networking - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 74
can enable the IPv4/ IPv6 SNMP v3 agent and create an SNMP v3 account on the print server. NOTE: HP Web Jetadmin 8.0 does not support SNMP configuration over IPv6 protocols. However, you can view HP Jetdirect MIB configuration objects (such as IPv6 and IPsec objects) over IPv4. Currently, browser - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 75
. Figure 4-2 Entering an IP Address or Fully Qualified Domain Name 3. If prompted with security alerts, click Yes to proceed. By factory default, HP Jetdirect print servers and printers/MFPs with IPsec support are configured as a secure site, using an X.509v3-compliant certificate installed on the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 76
to the network through the HP Jetdirect print server. Can also display other retrieved information such as Page Count or Control Panel status. The information varies depending on the features of the attached device. Displayed if the HP Jetdirect Web pages support multiple languages. You can also - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 77
the HP Jetdirect print server (for example HP J7982E). Firmware Version Operating instruction version installed on the HP Jetdirect print server. IP Address IP address configured on the HP Jetdirect print server. Hardware Address LAN hardware (or MAC) address of the HP Jetdirect print server - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 78
Page on page 103 Wireless Station NOTE: You can use HP Jetdirect wired/wireless print servers in a wired or wireless networking environment. To specify the wireless network connection. This launches a configuration wizard that guides you through the required 802.11 wireless configuration parameters - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 79
whether to enable aggregation of MAC service data units. Aggregating 802.11 MAC service data units packs them into the wireless configuration wizard, which guides you through the required 802.11 disable it. NOTE: The HP Jetdirect print server cannot operate in wireless mode when the radio - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 80
service set (IBSS), and computer-to-computer mode. The factory-default mode configured on the HP Jetdirect print server is ad hoc. To initially communicate with the print server the network must use the same key. The HP Jetdirect print server supports IEEE 802.11 wired equivalent privacy (WEP) keys - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 81
EAP/802.1x authentication. This type of security utilizes a central authentication server, such as RADIUS, to authenticate users on the network. For WEP - Enterprise, the HP Jetdirect print server supports these server-based authentication protocols: LEAP PEAP EAPTLS. Provide the following if you - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 82
- Enterprise which is commonly used in enterprise-level networks. A dedicated server verifies the identity of a user or device requesting access to the NOTE: The default WPA passphrase for HP Jetdirect print servers is hpSecureNetwork. 72 Chapter 4 HP Embedded Web Server (V.45.xx.nn.xx) ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 83
EAP/802.1x authentication. This type of security utilizes a central authentication server, such as RADIUS, to authenticate users on the network. For WPA - Enterprise, the HP Jetdirect print server supports these server-based authentication protocols: LEAP PEAP EAPTLS. Provide the following if you - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 84
host name assigned to the device and stored on the HP Jetdirect print server. To configure a host name, see the Network Identification tab. Status print server. IPv4 parameters configured using: DHCP, BOOTP, Manual, or Auto IP. Duration of the DHCP IP address lease (in seconds) for the print server - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 85
link-local addressing, by a router, by a DHCP(v6) server, or configured manually. ● Valid Lifetime: Length of time (lifetime) that the name that the HP Jetdirect print server resides in (for example, support.hp.com). This name is not the host name or the FQDN (such as printer1.support.hp.com). The - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 86
from session to session. The name is persistent. The default service name is the printer model and the last six digits of the more information, see TCP/IP configuration on page 15. Manually assign the IP address on the HP Jetdirect print server. This IP address uniquely identifies a node on a - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 87
v6) tab Use the TCP/IP(v6) tab to enable IPv6 operation, view IPv6 auto-configuration addresses, or manually configure IPv6 addresses. For basic information on IPv6 addresses on the print server, see TCP/IP configuration on page 15. For additional parameters that you can configure, see the Advanced - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 88
the order of precedence of the print server configuration methods. For example, to ensure that IPv4 parameters configured by a TFTP server cannot be overwritten by a manual configuration method (such as the printer control panel, Telnet, or the HP Embedded Web Server), you can indicate that TFTP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 89
remain open.) (IPv4 or IPv6) Print an LPD banner page for print jobs. For currently supported print servers, only Port 1 is available. (IPv4 or IPv6) Person who administers or services this device. If set, displayed on the Protocol Info page, and the HP Jetdirect Home tab, if available. (IPv4 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 90
server even when the print server is statically configured, such as a manually configured IP address, subnet mask or default gateway. Select or clear the check box to enable (default) or disable stateless DHCPv4 configuration. Enable DHCPv4 FQDN compliance with RFC 4702 By default, HP Jetdirect - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 91
value and click Apply. NOTE: The features displayed depend on the print server. Value-featured print servers provide limited protocol support. IPX/SPX Use the IPX/SPX tab to configure IPX/SPX parameters on the HP Jetdirect print server. IPX/SPX protocols are used for operation on a Novell NetWare - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 92
to send SAP messages, which are broadcast to advertise its service capabilities on a Novell NetWare network. The default is 60 seconds. Enter zero (0) to disable. Print Server Name NetWare printer name for the HP Jetdirect print server. The default name is NPIxxxxxx, where xxxxxx are the last - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 93
NOTE: The displayed AppleTalk parameters include the printer types that are advertised on the network. The HP Jetdirect print server supports AppleTalk Phase 2 only. Table 4-11 AppleTalk tab settings Item Description AppleTalk Enable Select the check box to enable the AppleTalk protocol. - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 94
confirm the password entered for Set Community Name Get Community Name is a password to retrieve (or read) SNMP information on the HP Jetdirect print server. Confirm Get Community Name reenter to confirm the password entered for Get Community Name An incoming SNMP SetRequest or GetRequest command - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 95
. It is accessed by HP software, such as the HP Standard Port. FTP Printing Use FTP services available on the HP Jetdirect print server for printing. For more information, see FTP printing on page 175. LPD Printing Use LPD services on the HP Jetdirect print server. LPD provides line printer - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 96
Service Allow HP Web Jetadmin to access and service your certificate configuration. Web Services Print Use the Microsoft Web Services for Devices (WSD) Print services supported on the HP Jetdirect print server messages during troubleshooting. By default, the HP Jetdirect print server uses LPR - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 97
and retrieve the appropriate upgrade file, click HP Jetdirect Firmware Updates (Internet access required), or visit HP online support at: www.hp.com/go/webjetadmin_firmware From the HP online firmware upgrade page, use the following steps: 1. Locate the print server model (or product number) and the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 98
cannot be changed. You can configure the remaining six queues. NOTE: Value-based print servers do not support user-defined LPD queues. You can set up the six modifiable queues with as two separate string names with different values. 88 Chapter 4 HP Embedded Web Server (V.45.xx.nn.xx) ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 99
Queues tab settings (continued) Item Description Queue Type Processing instruction for the queue. Choose from these four queue types: ● RAW No processing. Treats the data in a raw queue as a print job that is already formatted in PCL, PostScript, or HP-GL/2, and sends it to the printer without - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 100
item is displayed if the HP Jetdirect Web pages support multiple languages. You can also select supported languages by using the language preference the HP Jetdirect Security Configuration Wizard to set or change the current security level. This wizard guides you through the print server's security - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 101
Table 4-15 Wizard Security Levels Security Level Description Basic Security Requires that you configure an administrator password for configuration management. The administrator password is shared with other management tools, such as Telnet and SNMP applications. However, some management tools, - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 102
all the current settings that affect security. Click Finish to set your security selections. Custom Security Manually set all available security settings supported by your print server. For more information on specific parameters and selections, see Mgmt. Protocols on page 98 and Authorization - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 103
HP Jetdirect print server are synchronized so that the same password is used to access both printer and networking configuration pages. For printers that support HP Jetdirect print server to factory-default states (for example, through a cold reset), and then reconfigure your settings. ● Manually - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 104
the status of the certificates installed on the HP Jetdirect print server: ● Jetdirect Certificate Used to validate the identity of the HP Jetdirect device to clients and to network authentication servers. By factory default, a self-signed HP Jetdirect certificate is pre-installed, which allows the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 105
on the print server for use on other print servers. You are prompted for information in the following screen: Export the HP Jetdirect certificate and private key ● Delete CA Certificate (Full-featured print servers only) Remove the CA certificate installed on the HP Jetdirect print server. Displayed - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 106
can require configuration with the Common Name as specified on the certificate. If the default IP address 192.0.0.192 is set on the HP Jetdirect print server, it is probably invalid for your network. Do not use this default address to identify your device. ● Organization (Required) Specify the full - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 107
to display the access control list (ACL) on the HP Jetdirect print server. An ACL (or host access list) specifies individual host systems, or hosts are listed), any supported system can access the print server. NOTE: Not all print servers or devices support ACL, and support is limited to IPv4 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 108
HTTPS can be transparent depending on your browser's capabilities. NOTE: IPP is not supported on value-based print servers. By factory default, HP Jetdirect print servers and printers with IPsec support require HTTPS. Although not recommended, you can allow non-secure HTTPS and HTTP communications - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 109
protocols, see Introducing the HP Jetdirect print server on page 1. Because the HP Embedded Web Server uses TCP/IP, you cannot disable this protocol. NOTE: On HP Jetdirect 640n print servers, all network protocols except TCP/IP are disabled by factory default. Select the print services to use: port - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 110
Select device discovery protocols supported by the print server: SLP If enabled, the HP Jetdirect print server sends SLP packets, which notification. WS-Discovery Microsoft Web Services Dynamic Discovery (WS Discovery) protocols on the print server. Naming Resolution Indicates whether - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 111
. EAP-TLS requires an EAP User Name, HP Jetdirect certificate and CA certificate. Dynamic encryption keys are also used. EAP/802.1X user name (up to 128 characters maximum) for this device. The default is the default host name of the print server, NPIxxxxxx, where xxxxxx are the last six digits - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 112
, the device announcement agent is enabled.) The announcement agent uses the default DNS host name hp-print-mgmt to locate the configuration server. To override the host name, enter the configuration server's IP address. Select the check box to require authentication between this device and the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 113
on the HP Jetdirect print server. This information is often useful to diagnose performance and operational problems associated with the number of a support person, or Web links to product and technical support pages. The default Web links include HP online support and HP product information Web - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 114
104 Chapter 4 HP Embedded Web Server (V.45.xx.nn.xx) ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 115
protection at the network layer, the print server also supports an SNMPv3 agent at the application layer HP Jetdirect print server configured with an IPsec policy, ensure that computer systems communicating with the print server are properly configured. IPsec policies configured on the print server - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 116
Figure 5-1 Firewall Policy page Figure 5-2 IPsec Policy page The items on the IPsec/Firewall policy pages are described in the following table: 106 Chapter 5 IPsec/Firewall configuration (V.45.xx.nn.xx) ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 117
Policy is in place might not be IPsec-protected unless the All Services template is used. For example, installing a third-party Chai service plug-in, or upgrading firmware for the printer or print server, can result in a new service that is not covered by the IPsec policy. Review policies whenever - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 118
particular IP packet protocols and services, and the IPsec protocol used to protect them. When properly configured, the IPsec rules define the security associations for IP traffic to and from the HP Jetdirect print server and can ensure all traffic is secure. HP Jetdirect IPsec/Firewall wizard Use - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 119
services. Depending on whether IPsec is supported by the print server and device, the following actions are available: ● Allow traffic. If IPsec/Firewall is supported . Figure 5-3 Use the IPsec Wizard to configure rules HP Jetdirect IPsec/Firewall Policy Use the IPsec/Firewall Wizard to Configure - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 120
user-defined address templates. Maximum number of services you can add to a user-defined service template. NOTE: The predefined All Services template is not subject to this limitation and includes all services supported by the print server. Maximum number of services you can add to the policy. For - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 121
Address Select or specify the IP addresses for which this rule applies. These addresses are assigned to the HP Jetdirect print server and used, for example, when DHCP servers assign IP addresses from a scope of addresses. Specify a unique IP address directly or through a prefix. Remote Address - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 122
ports or ICMP message types are not configured. All IGMP messages types are assumed. Service type: ● Printer/MFP Service (default): Local service on the HP Jetdirect print server or device. ● Remote Service: Service on a remote host. 112 Chapter 5 IPsec/Firewall configuration (V.45.xx.nn.xx) ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 123
an action for the print server for the addresses and services specified for this rule. Available actions depend on whether IPsec is supported. ● Allow traffic. If IPsec is supported, allow traffic to pass and selected, click Next to complete the rule. ENWW HP Jetdirect IPsec/Firewall wizard 113 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 124
in the following table. 3. Click Next. NOTE: The subsequent configuration pages depend on your authentication type selection (Internet Key Exchange or Manual Keys). Table 5-7 Create IPsec Template page Item Description IPsec Template Name Custom IPsec template name. This name is added to the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 125
for a configured authentication, click View. To configure a new authentication, click Configure. Kerberos You can configure the HP Jetdirect print server for Kerberos authentication manually, or by importing configuration files. Items on the Kerberos page are described in the following table. ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 126
. Kerberos Settings Use the wizard to manually configure Kerberos account settings on the print server. 1. Use the Kerberos Settings page hp.com, the realm is HP.COM. Password for the HP Jetdirect account configured on active directory. Encryption type supported by the HP Jetdirect print server - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 127
are reasonably synchronized. When the HP Jetdirect print server checks time stamps of incoming Groups Allows a secret key and security services to be securely exchanged between two hosts known Diffie-Hellman groups are listed. IKEv1 supports up to DH-18. IKEv2 supports up to DH-24. To change - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 128
Set the IPsec anti-replay algorithm. IPsec protocols support anti-replay services to prevent message interception for later use, such listed. To change the entries in the list, click Edit. IPsec Protocols (Manual Keys) Items on the IPsec Protocols page are described in the following table. 118 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 129
privacy and integrity of packet contents. Select among the supported encryption methods/strengths and authentication methods to be used you must select an AH authentication method. Manual Keys Items on the Manual Keys page are described in the following table HP Jetdirect IPsec/Firewall wizard 119 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 130
Table 5-15 Manual Keys page (continued) Item Description AH SPI (AH SPI fields are and whether to enable the Failsafe feature. Configure Microsoft Windows systems To configure IPsec on supported Microsoft Windows systems, consult your system documentation, or search for IPsec on the Microsoft - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 131
benefits of authentication and encryption. Network Protocol Control ● Enable or disable network printing, printing services, device discovery, and management protocols on the HP Jetdirect print server. Prevent unauthorized access by disabling unused or unnecessary protocols. ● Enable or disable - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 132
HP Embedded Web Server. ● Configured on the HP Jetdirect print server using TFTP (IPv4), Telnet (IPv4), the HP Embedded Web Server, or SNMP (IPv4) management software on the HP Jetdirect print server using TFTP (IPv4), Telnet (IPv4), the HP Embedded Web Server, or Management application services. ● - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 133
Table 6-1 Summary of HP Jetdirect security features (continued) (For full-featured print servers only) ● SNMP v3 agent on the HP Jetdirect print server provides secure, encrypted communications with an SNMP v3 management application, such as HP Web Jetadmin. ● Supports creation of an SNMP v3 account - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 134
system can access the HP Jetdirect configuration parameters through the HP Embedded Web Server, Telnet, or SNMP management software. Passwords are not communication in plain text is not used. ● Full-featured HP Jetdirect print servers with SNMP v3 enabled, SNMP v1/v2c disabled ● Telnet disabled - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 135
problems associated with the HP Jetdirect print server. A flowchart guides you to the correct procedures for troubleshooting the following: ● Printer problems ● HP Jetdirect hardware installation and connection problems ● Network-related problems To troubleshoot your HP Jetdirect print server - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 136
service manuals. Or, visit www.hp.com/support and search for document file bpj02300.html. ● HP LaserJet Printers/MFPs with Embedded HP Jetdirect Print Server HP Jetdirect embedded print servers The control panel displays Select Language. 126 Chapter 7 Troubleshoot the HP Jetdirect print server ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 137
4. Press the down arrow M button (or 9 button) until Cold Reset appears. 5. Press the Select button (or 6 button) to perform a cold reset and then continue its turn-on sequence. ENWW Reset to factory defaults 127 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 138
print server and then continue its turn-on sequence. 6. Verify whether the printer/MFP properly completes its turn-on sequence. To enable the embedded print server, use the same instructions except select Embedded LAN enable in step 4. 128 Chapter 7 Troubleshoot the HP Jetdirect print server - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 139
General troubleshooting Troubleshooting chart - assess the problem Figure 7-1 Assessing the Problem Is the Printer On and Online? See Procedure 1 NO YES Can you print a Configuration Page? YES See Procedure 2 NO Does the printer control panel display a "READY" message? NO See Procedure 3 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 140
and corrective actions. Procedure 2: Print an HP Jetdirect configuration page The HP Jetdirect configuration page is an important troubleshooting tool. This page lists the status of your network and the HP Jetdirect print server. Also, the ability to print a configuration page provides an indication - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 141
see if it clears. If not, you might need to contact your service provider. 3. Does a 49 ERROR appear on the printer's control panel display? The HP Jetdirect print server detected a break in the data communications. When this error occurs, the printer goes offline. ENWW General troubleshooting 131 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 142
configuration page to verify proper settings. 4. If the print server is connected to an 802.1X network, is it properly configured for EAP/802.1X operation? The network must support the EAP method configured for use on the print server. 132 Chapter 7 Troubleshoot the HP Jetdirect print server ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 143
> is the IPv4 address assigned to the HP Jetdirect print server and is 9100, the default printing port of the print server. In the Telnet session, type in data and press Enter. The data should print to the printer (a manual form feed might be required). ENWW General troubleshooting 133 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 144
the configuration page. ● Confirm the network settings for the printer using the printer control panel (for printers with control panels). ● See the troubleshooting section in the online help included with the HP Web Jetadmin software. 134 Chapter 7 Troubleshoot the HP Jetdirect print server ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 145
Troubleshooting wireless print servers Unable to communicate during initial setup If you use wireless communications to set up the print server, verify the following: ● Your wireless computer is configured to match the default wireless network settings on the HP Jetdirect print server Basic service - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 146
include: ● The HP Embedded Web Server (see HP Embedded Web Server (V.45.xx.nn.xx) on page 63) ● Telnet (see TCP/IP configuration on page 15) NOTE: The configurable parameters available through these optional tools might be limited. 136 Chapter 7 Troubleshoot the HP Jetdirect print server ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 147
). If a firmware download failure occurs on an HP Jetdirect wireless print server, simply restart the download process and try again. If it is turned off and then on, the print server regains its previous configuration prior to the download failure. ENWW Troubleshooting wireless print servers 137 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 148
138 Chapter 7 Troubleshoot the HP Jetdirect print server ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 149
on page 140. For printers with an HP Jetdirect embedded print server installed, an HP Jetdirect configuration page automatically prints after a printer configuration page prints. For instructions, see your printer manuals. You can also view an HP Jetdirect configuration page over the network from - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 150
configuration page provides overall status and configuration settings on the print server. Status field error messages The HP Jetdirect configuration page contains several status fields for the print server and the supported protocols. One or more error codes and related error messages are displayed - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 151
menu accessed through the printer control panel. See HP Jetdirect Security page on page 159. Network Statistics (HP Jetdirect wired print servers only.) Current values for various network parameters monitored by the HP Jetdirect print server. See Table 8-5 Network Statistics on page 146. TCP - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 152
CARD NOT READY, or ERROR Problem detected with the print server or its configuration. An error code and message is displayed if the print server is not ready. For more HP online support personnel. S/N HP Jetdirect serial number. DATE MANUFACTURED Manufacture date of the HP Jetdirect print server - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 153
/ BSSID Basic service set identifier (BSSID) is a 6-byte number that distinguishes one wireless LAN (WLAN) from another, even if they have the same network name (SSID). Infrastructure Mode: The MAC address or name of the access point to which the HP Jetdirect wireless print server is connected - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 154
increase the data rate by approximately 10 percent. Aggregating 802.11n MAC service data units packs them into frames to reduce overhead and increase the data or DISABLED Security Settings Information in this section of the HP Jetdirect configuration page is described in the following table. Table - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 155
If the print server and printer/MFP device supports IPsec, then IPsec appears. If IPsec is not supported, then Firewall HP Jetdirect print server. This is a password to determine which SNMP GetRequests the HP Jetdirect print server responds to. If a Get community name is set, the print server - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 156
to other nodes. Number of frames specifically addressed to this HP Jetdirect print server. Does not include broadcasts or multicasts. Total number of frames (packets) received with errors by the HP Jetdirect print server. Total number of frames (packets) transmitted without error. 146 Chapter - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 157
the host printer name is not included. Not Specified Domain name not configured on the print server. IPV6 DOMAIN NAME DNS name of the IPv6 domain in which the HP Jetdirect print server resides (for example, support.company.com). This is not the fully qualified DNS name (for example, printer1 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 158
READY Print server is awaiting data over TCP/IP. DISABLED TCP/IP is manually disabled. INITIALIZING Print server is searching for the BOOTP server, page 153. IPv4 address assigned to the HP Jetdirect print server. This is a required entry for operation of the print server on a TCP/IP network. During - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 159
is not set. WEB JETADMIN URL If the HP Jetdirect print server is found on the network by HP Web Jetadmin, the URL of the host system used for HP Web Jetadmin services is displayed. The URL is limited to two lines and can be truncated. Not Specified HP Web Jetadmin host system URL could not be - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 160
Address is not set. MANUAL IPv6 address manually configured on the print server, using the printer control panel or the HP Embedded Web Server. Not Configured Address is not set. IPX/SPX protocol information Information in this section of the HP Jetdirect configuration page is described in - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 161
NDS name where the HP Jetdirect print server object resides in the NDS tree. For example: CN=lj_pserver.OU=support.OU=mycity.OU=mycompany Not Specified (or blank) NDS is disabled. ATTACHED SERVER HP Jetdirect discovery method [NSQ] (Nearest Service Query) or [GSQ] (General Service Query) and the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 162
section of the HP Jetdirect configuration page is described in Table 8-12 DLC/LLC configuration information on page 152. Table 8-12 DLC/LLC configuration information Message Description STATUS: Current DLC/LLC protocol status. READY Print server is awaiting data. DISABLED Manually disabled - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 163
network cabling, run the self-test by turning the printer off, and then on again. If the error persists, there might be a problem with the HP Jetdirect print server. 0E LAN ERROR - LOSS OF CARRIER Check the network connections. If the connections are intact, run the self-test: turn the printer - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 164
stored correctly on the print server. Use the installation software, HP Embedded Web Server, or other tools to reconfigure the print server. If this error persists, there might be a problem with the HP Jetdirect print server. 16 NOT CONFIGURED (Ethernet) Print server is not configured for NetWare - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 165
to this queue, or if there is a networking or security problem. Use PCONSOLE to verify servers can attach to the queue, to delete the print server object from the list of queue servers (to have the the HP Jetdirect print server service other queues), or to delete the queue and create a new one - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 166
frame type and source routing are correct. 2A NDS ERR: EXCEEDS MAX SERVERS More queues are assigned than the HP Jetdirect print server can service. Remove one or more print queues from the list to be serviced by queue server mode. 2B NDS ERR: UNABLE TO LOGIN Unable to log onto the NetWare - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 167
is not running or a communications problem exists. 3E NDS PRNT SRVR PUBLIC KEY ERR Print server object name mismatch. Unable to read the print server's public key. Verify object names. Verify that the object key assigned to the HP Jetdirect print server is a print server object and not a printer - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 168
does not support AppleTalk or AppleTalk extensions. 59 INCOMPLETE F/W - MUST DOWNLOAD Currently downloading firmware to the HP Jetdirect print server, or the download did not complete properly. 5A TURN PRINTER OFF / ON Firmware download is complete. Turn the HP Jetdirect print server off and - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 169
use BootP or DHCP to obtain TCP/IP configuration settings over the network. HP Jetdirect Security page If the HP Jetdirect print server supports IPsec, you can print an enhanced Security page from the HP Jetdirect menu that is accessed through the printer control panel. The following figure shows - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 170
the following table. Security settings This section of the Security page displays similar information to that provided by the standard HP Jetdirect configuration page. See the following table. Table 8-14 General Information Message Description 802.1X EAP/802.1X client authentication setting - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 171
. SNMP Set Cmty Name SNMP set community name is set on the HP Jetdirect print server. An SNMP set community name is a password for write access to SNMP control functions (SNMP SetRequests) on the HP Jetdirect print server. Not Specified Set community is not set. Specified Set community is set - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 172
by a new predefined version available for use. Review your IPsec/Firewall policy and ensure the appropriate service templates are used. You should upgrade the firmware version on your HP Jetdirect print server. Local IP addresses This section lists the IPv4 and IPv6 addresses configured on the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 173
consists of rules that control the security of the traffic received and transmitted by the print server. Rules are configured with an IPsec configuration wizard, which is accessed from the HP Embedded Web Server. You can configure up to ten rules. The heading of this section indicates the default - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 174
the IPsec traffic. In Number of IPsec packets received, transmitted, or dropped by the print server. Out Dropped Available Network Services This section lists the well-known ports of HP Jetdirect services being accessed. A remote port is associated with a remote client application. A local port - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 175
printing The HP Jetdirect print server contains an LPD server module to support LPD printing. This chapter describes how to configure the HP Jetdirect print server for use with various systems that support LPD printing or greater) support LPD printing. For setup instructions and support, see the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 176
print server status information. This information is listed on the HP Jetdirect printer configuration page. If you have not printed a configuration page from your printer, see your printer documentation for instructions. You must also have the following: ● Operating system that supports LPD printing - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 177
and how the line HP Jetdirect printer daemon server processes each. Table A-2 Supported queue types raw, raw1, raw2, raw3 text, text1, text2, text3 auto, auto1, auto2, auto3 binps, binps1, binps2, binps3 No processing. Treats the data in the queue as a print job already formatted in - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 178
identifies the printer on the network, and remote_printer_name_argument is the print queue designation (such as text, raw, binps, auto, sd=/usr/spool/lpd/lj1_raw: If your printer does not support automatic switching between PostScript, PCL, and HP-GL/2 languages, use the printer's control panel (if - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 179
name (jetdirect1) of the HP Jetdirect print server is used: Example: jetdirect1 7. Select a remote printer name. Type text for ASCII or raw for PostScript, PCL, or HP-GL/2. Type auto to let the line printer daemon select automatically. Type binps to instruct the PostScript interpreter to interpret - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 180
the process for configuring the HP Jetdirect print server to use LPD. LPD on Microsoft Windows Server 2003/2008 systems Use the information in this section to configure supported Microsoft Windows networks to use the HP Jetdirect LPD services. ● Install TCP/IP software (if required). ● Configure - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 181
computer for the changes to take effect. Configure a network printer for Microsoft Windows Server 2003/2008 systems Set up the default printer by performing the following steps. 1. Verify that the Print Services for Unix is installed (required for LPR port availability): a. Click Start, All Programs - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 182
the appropriate IPv6 records are configured in DNS. If name resolution is supported, enter the print server's host name or an FQDN on these applications. b. For the name of the printer or print queue on the HP Jetdirect print server, enter (in lowercase) raw, text, auto, binps, or the name of a user - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 183
> is raw or text and filename is the file to print. If the file prints correctly, the configuration was successful. If the file does not print, or prints incorrectly, see Troubleshoot the HP Jetdirect print server on page 125. Print from Microsoft Windows clients If the LPD printer on the Microsoft - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 184
of the HP Jetdirect print server. NOTE: Some client applications do not support direct IPv6 print queue for the HP Jetdirect print server (for example: raw, text, auto, or binps.) c. Click OK. 6. Select the manufacturer and printer model. (If necessary, click Have Disk and follow the instructions - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 185
with RFC 959. NOTE: For the most recent list of tested systems, visit HP online support at www.hp.com/support/ net_printing. Print files The HP Jetdirect FTP server transfers print files to the printer but does not interpret them. Print files must be in a language recognized by the printer (such as - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 186
dir or put commands). Although the ls and dir commands are always accepted, the HP Jetdirect FTP server supports a single data connection for printing. The transmission mode for an FTP data connection with the HP Jetdirect print server is always in stream mode, which marks the end-of-file by closing - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 187
FTP binary (image) file transfer. Configure an FTP ASCII file transfer. HP Jetdirect print servers support only non-print format control for character transfers (standard values for spacing and margins are used). Abort the FTP service command and any transfer of data. The data connection is closed - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 188
>>: susan_g 001 Username Ok, send identity as password Password: 230- Hewlett-Packard FTP Print Server Version 2.0 Directory: Description: PORT1 Print to port 1 HP color LaserJet 4500 To print a file, use the command: put [portx] or cd to a desired port and use - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 189
45.xx.nn.xx) The configuration menu for the HP Jetdirect EIO and embedded print servers is accessed from the printer's control panel. The steps to access this menu from the printer control panel depend on the printer. See the printer guide, or print a control panel menu map for more information. The - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 190
/MFPs with an HP Jetdirect embedded print server, or that contain an EIO slot in which an HP Jetdirect EIO print server is installed. The displayed menu items depend on the features supported by the print server. Figure C-1 Example of Graphical Control Panel Table C-1 HP Jetdirect EIO Menu on - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 191
) address. IPv4 Settings Config Method How TCP/IPv4 parameters are configured on the HP Jetdirect print server. BootP: Automatic configuration from a BootP server. DHCP (default): Automatic configuration from a DHCPv4 server. If a DHCP lease exists, use the DHCP Release and DHCP Renew menus to - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 192
use if the print server is unable to obtain an IP address from the network during a forced TCP/IP reconfiguration. (For example, when manually configured to use BootP or DHCP.) Auto IP: Link-local IP address 169.254.x.x is set. Legacy: 192.0.0.192 is set, consistent with older HP Jetdirect devices - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 193
HP Embedded Web Server. Secondary DNS IPv6 address for a secondary DNS server that the print server uses. NOTE: Displays only if Manual Contact your ISP for the proxy server address, when required. Proxy Port Port number used by the proxy server for client support. This port is reserved for - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 194
current settings.. NOTE: Displays only if IPsec is supported on the print server. Secure Web Require encrypted communication between a browser and the HP Embedded Web Server. HTTPS Required: Only HTTPS access is accepted. The print server appears as a secure site. HTTP/HTTPS Optional: Access - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 195
certificates during a cold reset. Login Security Keep Reset Assessment Keep Disable Diagnostics Embedded Tests (HP Jetdirect embedded print servers only.) Diagnose network hardware or TCP/IP network connection problems. Use an embedded test to check hardware and communication paths on the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 196
problems on an HP postscript level 3 emulation device. Sends a predefined PS file to the device. However, the file does not print Print Results Print the test results (if not running continuously). Yes: Print the results. No (default): Do not print the results. 186 Appendix C HP Jetdirect - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 197
Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued) Menu item Sub-menu item Sub-menu item Values and the data. No: Maintain the existing data. (Automatically refreshes when the menu times out or you manually return to the main menu.) ENWW Graphical control panel menus 187 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 198
the hub/switch port. (A 1000T half-duplex selection is not supported.) 10T Half: 10 Mbps, half-duplex operation. 10T Full: print server. Print Protocols Print a page that lists the configuration of the following protocols: IPX/SPX, Novell NetWare, AppleTalk, DLC/ LLC. 188 Appendix C HP Jetdirect - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 199
control panels are provided on older devices that support HP Jetdirect EIO print servers only. Classic control panels typically display two lines of 16 characters each. Use the available device keys to display and select HP Jetdirect settings. Typically, an asterisk (*) identifies the selected value - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 200
the behavior of a manually configured IPv6 address detected on the print server. ◦ KEEP (default): Maintain the address in an active state. ◦ DISABLE: Maintain the address but in an inactive state. Print an HP Jetdirect configuration page to verify your settings. (The print server can overwrite - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 201
print servers only) If the print server supports IPsec, IPSEC is displayed on the menu for both IPsec and Firewall status. If the print server does not support configuration. SECURITY: Print the current security settings. CFG LINK Manually configure the HP Jetdirect print server's network link. - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 202
192 Appendix C HP Jetdirect control panel menus (V.45.xx.nn.xx) ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 203
HP products discussed in this guide include open source software developed by the following: ● gSOAP ● Expat XML Parser ● cURL ● GNU General Public License ● GNU Lesser General Public License ● OpenSSL gSOAP Part of the software TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 204
the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 205
any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 206
that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 207
normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 208
the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b. Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 209
present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 210
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 211
hp.com. A distribution fee may apply. GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software distribute copies of free software (and charge for this service if you wish); that by problems that might be introduced by others. Finally, software patents - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 212
case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 213
modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a. The modified work must itself be a software library. b. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c. You - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 214
corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 215
the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a. Accompany the work with the complete corresponding machine-readable - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 216
as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 217
software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 218
features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 219
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 220
210 Appendix D Open source licensing statements ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 221
Cold reset 126 Communication Mode Telnet 44 Community name Configuration page 145 embedded Web server 84 Security features 122 Telnet 54 TFTP configuration 33 CONFIG BY 148 Configuration HP Web Jetadmin 10 LPD printing 165 Software solutions 7 TCP/IP networks 19 Telnet commands 42 TFTP parameters 26 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 222
24 embedded Web server 74, 75 Telnet 46 TFTP file 27 HP Jetdirect Cold reset 126 Configuration page messages 141 Configuration page, how to print 130 Control panel menu 61, 179 Error messages 152 Network statistics 144, 146 Supported print servers 1 wireless settings 143 HP Support, Online 5 212 - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 223
Network Configuration page 139 Error messages 152 HP software solutions 7 Protocols 188 Security settings 144, 184 Statistical parameters 146 Supported protocols 2 Network Name (SSID) embedded Web server 70 Telnet configuration 44 NIS (Network Information Service) 23 NO QUEUE ASSIGNED 154 NODE NAME - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 224
Primary Frame Type 150 Print queue BSD systems 168 LPD 49, 167 SAM (HP-UX) systems 169 PRINT SERVER NOT DEFINED 154 Print servers Supported 1 Printcap file 168 embedded Web server 84 HP Web Jetadmin 64 SPI. See Security Parameters Index SSID (Service Set Identifier) 70 embedded Web server 70 Telnet - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 225
Telnet 55 TFTP 34 Troubleshooting 125 Cold reset the print server 126 Configuration page error messages 152 Disable the print server 128 Flow chart 129 troubleshooting wireless print servers 135 U UNICAST PACKETS RCVD 146 UNIX (HP-UX and Solaris) networks, LPD printing 165 Upgrades, firmware. See - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 226
216 Index ENWW - HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 227
- HP Jetdirect 640n | HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 228
© 2012 Hewlett-Packard Development Company, L.P. www.hp.com
HP Jetdirect Print Servers
Administrator’s Guide
J8025A (640n)
J8024A (695n)
HP Jetdirect Firmware V.45