HP L6015tm L6015tm and L6017tm Retail Touch Monitors User Guide - Page 11
Removing the Top and Bottom Cover Plates, Removing the Rear Panel Screws
View all HP L6015tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2. Slide the top cover plate on the back of the monitor up approximately 12mm (1/2 inch) to access two of the rear panel screws. Remove the cable connection cover plate by pressing the two ribbed areas at the top of the cover (1) and pulling the cover straight down and off the monitor (2) to access two more of the rear panel screws. Figure 2-4 Removing the Top and Bottom Cover Plates 3. Remove the eight screws that attach the rear panel to the monitor. Figure 2-5 Removing the Rear Panel Screws Installing Optional USB Modules 5
2.
Slide the top cover plate on the back of the monitor up approximately 12mm (1/2 inch) to access
two of the rear panel screws. Remove the cable connection cover plate by pressing the two
ribbed areas at the top of the cover (1) and pulling the cover straight down and off the monitor
(2) to access two more of the rear panel screws.
Figure 2-4
Removing the Top and Bottom Cover Plates
3.
Remove the eight screws that attach the rear panel to the monitor.
Figure 2-5
Removing the Rear Panel Screws
Installing Optional USB Modules
5