HP L6015tm L6015tm and L6017tm Retail Touch Monitors User Guide - Page 34
Recognizing Preset Display Resolutions, L6015tm and L6017tm, Entering User Modes - manual
View all HP L6015tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognized these preset modes and they will appear properly sized and centered on the screen. L6015tm and L6017tm Table B-4 Factory Preset Modes Preset Pixel Format 1 640 × 480 2 720 × 400 3 800 × 600 4 1024 × 768 5 1280 × 1024 (L6017tm only) Horz Freq (kHz) 31.469 31.469 37.879 48.363 63.981 Vert Freq (Hz) 59.940 70.087 60.317 60.004 60.020 Entering User Modes The video controller signal may occasionally call for a mode that is not preset if: ● You are not using a standard graphics adapter. ● You are not using a preset mode. If this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In addition to the 4 or 5 factory preset, there are 10 user modes that can be entered and stored. The only condition to store as a user mode is the new display information must have 1 KHz difference for horizontal frequency or 1 Hz for vertical frequency or the sync signal polarities are different from the default modes. Energy Saver Feature When the monitor is in its normal operating mode, the monitor uses less than 21 watts and the Power light is green. The monitor also supports a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize less than 1 watt of power. There is a brief warm up period before the monitor will return to its normal operating mode. Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features). NOTE: The above power saver feature only works when connected to computers that have energy saver features. 28 Appendix B Technical Specifications