HP LC2000r HP Netserver LT 6000 FC Config Guide for Windows NT4.0 Clusters - Page 4
Shared Storage Cabling
 |
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
NIC: Model Driver No. of NICs The intra-cluster LAN may only be used for cluster node communication via a crossover cable. It may not be used for client communication. Embedded NIC Hptxnt.sys 3.27.00.0001 or later 1 Any that is on both the HP Tested Products List and the Microsoft Hardware Compatibility List. Vendor supported driver NOTE If the NIC used is the same type as the embedded NIC (D5013A/B), then the Client LAN NIC must use the same driver as the Intra-cluster NIC. 1 minimum Shared Storage Cabling This part of the guide defines the allowable cabling configuration for clusters using the HP NetServer LT 6000r and HP Rack Storage/12FC. Only this cabling configuration and these cables are supported. 4
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
4
The intra-cluster LAN may only be
used for cluster node
communication via a crossover
cable.
It may not be used for client
communication.
NIC:
Model
Embedded NIC
Any that is on both the HP
Tested Products List and the
Microsoft Hardware
Compatibility List.
Driver
Hptxnt.sys 3.27.00.0001 or later
Vendor supported driver
NOTE
If the NIC used is the
same type as the embedded NIC
(D5013A/B), then the Client
LAN NIC must use the same
driver as the Intra-cluster NIC.
No. of NICs
1
1 minimum
Shared Storage Cabling
This part of the guide defines the allowable cabling configuration for clusters using the HP NetServer
LT 6000r and HP Rack Storage/12FC.
Only this cabling configuration and these cables are supported.