HP LH4r HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters - Page 2

System software: Navigator version Operating System Service pack SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots: LANs LAN connection NIC: Model Driver No. of NICs SPU I/O slot G.01.45 or later Microsoft Windows NT Server 4.0, Enterprise Edition or later SP3 and hotfix "clusfixi", or later HP NetServer LXr Pro8 200 MHz. 2-8 (at least 2 are required for each node; in increments of 2) 1.03 or later 1 MB 256 MB minimum. Must be HP. 4 Internal or external, using any controller. Must use HP disks. See Local Storage below. P5- P6 - Shared storage controller See Shared Storage below. P2 - Intra-cluster LAN P3 - Client LAN All others - Any other plug-in cards. Intra-cluster LAN HP D5954A crossover cable or any equivalent only The intra-cluster LAN may only be used for cluster node communication via a crossover cable. It may not be used for client communication. HP D5013A (10/100TX PCI) (or HP J3171A) 2.24.00.0000 or later 1 P2 Client LAN Any LAN Any that is on both the HP Tested Products List and the Microsoft Hardware Compatibility List. Any driver. If the NIC used is the same as the Intra-cluster LAN, then the Client LAN must use the same driver as the Intra-cluster LAN. 1 minimum P3 2