HP Laser 100 User Guide - Page 86
The toner cartridge may not be installed properly. Remove the, Cleaning the machine
View all HP Laser 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Condition Page skew Suggested Solutions • Ensure that the paper is loaded properly. • Check the paper type and quality. • Ensure that the guides are not too tight or too loose against the paper stack. Curl or wave • Ensure that the paper is loaded properly. • Check the paper type and quality. Both high temperature and humidity can cause paper curl. • Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. Wrinkles or creases • Ensure that the paper is loaded properly. • Check the paper type and quality. • Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. Back of printouts are dirty • Check for leaking toner. Clean the inside of the machine (see "Cleaning the machine" on page 68). Solid color or black pages • The toner cartridge may not be installed properly. Remove the cartridge and reinsert it. • The toner cartridge may be defective. Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on page 67). • The machine may require repairing. Contact a service representative. Solving other problems | 87