HP LaserJet 3200 HP LaserJet 3200 Series Product - Getting Started Guide - Page 28
Connecting power and testing, Connecting power
View all HP LaserJet 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Connecting power and testing Connecting power The HP LaserJet 3200 product does not have a power switch. It turns on when the power cord is connected. 1 To connect the product power cord CAUTION Use the power cord that came in the product box. Using a different power cord can damage the product. 1 Connect the power cord to the connector on the back of the product. 2 Plug the other end into a grounded power strip or wall outlet. Note After you complete step 2, the product turns on and begins an internal self-test. If you plug the product into a power strip that has an on/off switch, make sure that the power strip is turned on at all times. The product cannot receive faxes if it is without power. Check your work #6 After you connect the power cord, does READY appear on the control panel display? 28 Chapter 2 - Installation EN