HP LaserJet Pro CP1525 Service Manual - Page 51
WARNING, CAUTION, print-quality problems.
View all HP LaserJet Pro CP1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
9. Carefully lift up on the black plastic portion of the ITB, and then pull it partially out of the product (the ITB wire harness will prevent the ITB from being fully removed). WARNING! Only partially pull the ITB out of the product to avoid damage to the secondarytransfer (T2) roller. CAUTION: Avoid touching the black plastic transfer belt. Skin oils on the belt might cause print-quality problems. Figure 1-52 Remove the ITB (7 of 9) 10. Feed the ITB wire harness (callout 7) through an opening in the chassis (callout 8). Figure 1-53 Remove the ITB (8 of 9) 7 8 ENWW Removal and replacement procedures 33
9.
Carefully lift up on the black plastic portion of the ITB, and then pull it
partially
out of the product
(the ITB wire harness will prevent the ITB from being fully removed).
WARNING!
Only
partially
pull the ITB out of the product to avoid damage to the secondary-
transfer (T2) roller.
CAUTION:
Avoid touching the black plastic transfer belt. Skin oils on the belt might cause
print-quality problems.
Figure 1-52
Remove the ITB (7 of 9)
10.
Feed the ITB wire harness (callout 7) through an opening in the chassis (callout 8).
Figure 1-53
Remove the ITB (8 of 9)
7
8
ENWW
Removal and replacement procedures
33