HP LaserJet Pro CP1525 Service Manual - Page 53
Reinstall the ITB
View all HP LaserJet Pro CP1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Reinstall the ITB Use the following guidelines when you install the ITB. ● WARNING! The lower sheet-metal portion of the ITB frame (callout 1) can be easily bent. Avoid handling the ITB by this part of the sheet-metal frame. Figure 1-55 Reinstall the ITB (1 of 2) 1 ● When handling the ITB, always hold it using the hard plastic portions of the assembly. CAUTION: Avoid touching the black-plastic transfer belt or roller. Skin oils on the belt or roller might cause print-quality problems. ● Do not let the transfer belt contact hard or sharp objects. CAUTION: Scratches, punctures, or other damage to the belt will cause print-quality problems. ● Make sure that the wire harness is not twisted or pinched after it is passed through the opening in the chassis and that the ITB sits flat in the product. NOTE: When the print-cartridge drawer is installed, it should easily slide in and out of the product and not contact any part of the ITB assembly. ENWW Removal and replacement procedures 35