HP MSA 1040 HP MSA 1040 SMU Reference Guide (762784-001, March 2014) - Page 150
connUnitEventTable, User Datagram Protocol UDP port
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Table 13 FA MIB 2.2 objects, descriptions, and values (continued) Object Description Value connUnitEventTable connUnitEventUnitId connUnitEventIndex connUnitEventId connUnitREventTime connUnitSEventTime connUnitEventSeverity connUnitEventType connUnitEventObject connUnitEventDescr connUnitLinkTable connUnitPortStatFabric Table connUnitPortStatSCSITable connUnitPortStatLANTable SNMP TRAPS trapMaxClients trapClientCount connUnitEventTrap trapRegTable trapRegIpAddress trapRegPort trapRegFilter Includes the following objects as specified by the FA MIB2.2 Spec connUnitId of the connectivity unit Same as connUnitId that contains this port Index into the connectivity unit's event buffer, incremented for each event Starts at 1 every time there is a table reset or the unit's event table reaches its maximum index value Internal event ID, incremented for each event, ranging between 0 and connUnitMaxEvents Starts at 0 every time there is a table reset or connUnitMaxEvents is reached Real time when the event occurred, in the following format: DDMMYYYY HHMMSS 0 for logged events that occurred prior to or at startup sysuptime timestamp when the event occurred 0 at startup Event severity level error(5), warning(6) or info(8) Type of this event As defined in CAPI Not used 0 Text description of this event Formatted event, including relevant parameters or values Not supported N/A Not supported N/A Not supported N/A Not supported N/A The following SNMP traps are supported Maximum number of trap clients 1 Number of trap clients currently enabled 1 if traps enabled; 0 if traps not enabled This trap is generated each time an event occurs that passes the connUnitEventFilter and the trapRegFilter N/A Includes the following objects per the FA MIB2.2 Spec IP address of a client registered for traps IP address set through Telnet User Datagram Protocol (UDP) port 162 to send traps to for this host Settable: Defines the trap severity filter for this trap host. The connUnit will send traps to this host that have a severity level less than or equal to this value. Default: warning(6) 150 SNMP reference