HP Microportable Projector MP2800 Compaq MP2800 Microportable Projector - Page 17
Adjusting the Projector Focus, Screen Menus²
View all HP Microportable Projector MP2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3. To lower the display angle, press the elevator button again and press down on the projector to lower it. CAUTION: Failure to press the elevator button before adjusting the elevator foot can result in damage to the elevator mechanism. Adjusting the Projector Focus To focus the projected image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.74 (1.14 meters) to 32.8 feet (10 meters). If vertical bars appear on the display after adjusting the focus, press the Resync button to automatically synchronize and track the display. If the button does not correct the display, use the Digital Conversion feature in the on-screen menu to manually adjust the synchronization and tracking. Refer to the "Adjusting the OnScreen Menus" section in Chapter 2. Getting Started 17