HP Microportable Projector MP2800 Compaq MP2800 Microportable Projector - Page 23

RIMPORTANT, When the message disappears from the screen, there is a 45-second

Page 23 highlights

Symbol Control Standby button Select button − Minus button + Plus button R Resync button Function Powers the projector lamp on and off. The Standby LED changes color modes to indicate the following operating modes: 1. Flashing amber indicates the projector is going into standby mode and cannot be restarted until the LED glows amber steadily. 2. All five LED buttons rapidly flashing amber indicate the lamp has overheated and the projector has automatically shut down. 1. Launches first, second, and third-level on-screen menus. 2. Exits the on-screen menus. Selects and adjusts the on-screen scroll down menu functions. Selects and adjusts the on-screen scroll up menu functions. Automatically synchronizes the projector to track the input source. IMPORTANT: To use standby mode, press the Standby button and, after a six to ten-second delay, the unit enters Standby mode and the projector lamp turns off. A "Going to Standby" message appears on the screen for the duration of the six to ten-second delay. When the message disappears from the screen, there is a 45-second delay before the lamp can be turned back on. Wait 45 seconds to allow the lamp to cool before pressing the Standby button again. Using the Projector 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61

Using the Projector
23
Symbol
Control
Function
Standby button
Powers the projector lamp on and
off. The Standby LED changes
color modes to indicate the
following operating modes:
1.
Flashing amber indicates the
projector is going into standby
mode and cannot be restarted
until the LED glows amber
steadily.
2.
All five LED buttons rapidly
flashing amber indicate the
lamp has overheated and the
projector has automatically shut
down.
Select button
1.
Launches first, second, and
third-level on-screen menus.
2.
Exits the on-screen menus.
Minus button
Selects and adjusts the on-screen
scroll down menu functions.
+
Plus button
Selects and adjusts the on-screen
scroll up menu functions.
R
Resync button
Automatically synchronizes the
projector to track the input source.
IMPORTANT:
To use standby mode, press the
Standby
button
and, after a six to ten-second delay, the unit enters Standby mode
and the projector lamp turns off. A °Going to Standby± message
appears on the screen for the duration of the six to ten-second delay.
When the message disappears from the screen, there is a 45-second
delay before the lamp can be turned back on. Wait 45 seconds to
allow the lamp to cool before pressing the
Standby
button again.