HP Nc2400 Computer Setup - Page 10

Security menu Select Setup password Power-On password Password options DriveLock passwords Smart Card security TPM Embedded Security System IDs Disk Sanitizer To Do This Enter, change, or delete a setup password. Enter, change, or delete a power-on password. ● Enable/disable stringent security. ● Enable/disable password requirement on computer restart. ● Enable/disable DriveLock on any computer hard drive and optional MultiBay hard drives. ● Change a DriveLock user or master password. NOTE DriveLock settings are accessible only when you enter Computer Setup by turning on (not restarting) the computer. Enable/disable support for smart card and Java™ Card power-on authentication. NOTE Power-on authentication for smart cards is supported only on computers with optional smart card readers. Enable/disable support for TPM (Trusted Platform Module) Embedded Security, which protects the computer from unauthorized access to owner functions in Embedded Security for ProtectTools. For more information, refer to the ProtectTools Security Manager Reference Guide located in the Help and Support Center, or refer to Credential Manager for ProtectTools online Help. Enter user-defined computer asset and ownership tag. Run Disk Sanitizer to destroy all existing data on the primary hard drive. The following options are available: ● Fast: Runs the Disk Sanitizer erase cycle once. ● Optimum: Runs the Disk Sanitizer erase cycle 3 times. ● Custom: Allows you to select the desired number of Disk Sanitizer erase cycles from a list. CAUTION If you run Disk Sanitizer, the data on the primary hard drive is destroyed permanently. 6 Chapter 3 Computer Setup menus ENWW