HP Nc2400 Memory Modules - Windows Vista
HP Nc2400 - Compaq Business Notebook Manual
UPC - 883585088331
View all HP Nc2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Nc2400 manual content summary:
- HP Nc2400 | Memory Modules - Windows Vista - Page 1
Memory Modules User Guide - HP Nc2400 | Memory Modules - Windows Vista - Page 2
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: January 2007 Document Part Number: 430236-001 - HP Nc2400 | Memory Modules - Windows Vista - Page 3
Table of contents Replacing the memory module Index ...6 ENWW iii - HP Nc2400 | Memory Modules - Windows Vista - Page 4
iv ENWW - HP Nc2400 | Memory Modules - Windows Vista - Page 5
which is located on the bottom of the computer. The memory capacity of the computer can be upgraded by upgrading the existing memory module in the memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all battery packs before - HP Nc2400 | Memory Modules - Windows Vista - Page 6
. Remove the memory module: a. Pull away the retention clips (1) on each side of the memory module . The memory module tilts up. CAUTION To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. 2 Replacing the memory module - HP Nc2400 | Memory Modules - Windows Vista - Page 7
gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 11. Insert a new memory module: a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION To prevent damage to the - HP Nc2400 | Memory Modules - Windows Vista - Page 8
damage to the memory module, be sure that you do not bend the memory module. 12. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 13. Close the cover (2). 14. Tighten the memory module compartment cover screw (3). 4 Replacing the memory module ENWW - HP Nc2400 | Memory Modules - Windows Vista - Page 9
15. Replace the battery pack. 16. Reconnect external power and external devices. 17. Turn on the computer. If the computer displays a message indicating that the size or configuration of the memory has changed, press f1 to save the changes. ENWW 5 - HP Nc2400 | Memory Modules - Windows Vista - Page 10
Index M memory replacing memory modules 1 memory module inserting 3 removing 2 replacing 1 memory module compartment cover removing 2 replacing 4 6 Index ENWW - HP Nc2400 | Memory Modules - Windows Vista - Page 11
Memory Modules
User Guide