HP Nc2400 Memory Modules - Windows Vista - Page 7
To prevent damage to the memory module, hold the memory module - memory slots
UPC - 883585088331
View all HP Nc2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 11. Insert a new memory module: a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. ENWW 3
b.
Grasp the edge of the memory module
(2)
, and gently pull the module out of the memory
module slot.
To protect a memory module after removal, place it in an electrostatic-safe container.
11.
Insert a new memory module:
a.
Align the notched edge
(1)
of the memory module with the tab in the memory module slot.
CAUTION
To prevent damage to the memory module, hold the memory module by
the edges only. Do not touch the components on the memory module.
b.
With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module
(2)
into the memory module slot until it is seated.
ENWW
3