HP Nw9440 Memory Modules - Page 4
Adding a memory module to the expansion memory module slot - shuts down
UPC - 882780782174
View all HP Nw9440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Adding or replacing memory modules Adding a memory module to the expansion memory module slot To add or replace a memory module in the expansion memory module slot: 1. Shut down the computer. If you are not sure whether the computer is off or in hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Turn the computer upside down. 5. Remove the battery pack from the computer. 6. Loosen the 3 memory module compartment cover screws 1. 7. Lift the memory module compartment cover 2 away from the computer. 1-2 Memory Modules
1–2
Memory Modules
Adding or replacing memory modules
Adding a memory module to the
expansion memory module slot
To add or replace a memory module in the expansion memory
module slot:
1. Shut down the computer.
If you are not sure whether the computer is off or in
hibernation, turn the computer on by pressing the power
button. Then shut down the computer through the operating
system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Turn the computer upside down.
5. Remove the battery pack from the computer.
6. Loosen the 3 memory module compartment cover screws
1
.
7. Lift the memory module compartment cover
2
away from
the computer.