HP Nw9440 Memory Modules - Page 8
Upgrading the memory module in the primary memory module slot - memory upgrade
 |
UPC - 882780782174
View all HP Nw9440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Adding or replacing memory modules Upgrading the memory module in the primary memory module slot To upgrade a memory module in the primary memory module slot: 1. Shut down the computer. If you are not sure whether the computer is off or in hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Turn the computer upside down on a flat surface. 5. Remove the battery pack from the computer. 1-6 Memory Modules
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
 |
 |
1–6
Memory Modules
Adding or replacing memory modules
Upgrading the memory module in the
primary memory module slot
To upgrade a memory module in the primary memory
module slot:
1. Shut down the computer.
If you are not sure whether the computer is off or in
hibernation, turn the computer on by pressing the power
button. Then shut down the computer through the operating
system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Turn the computer upside down on a flat surface.
5. Remove the battery pack from the computer.