HP Nx7400 Drives - Page 6
Hard drive, Replacing the hard drive
UPC - 882780786653
View all HP Nx7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3 Hard drive Replacing the hard drive Ä CAUTION: To prevent system lockup and loss of information: ■ Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in standby, or in hibernation. ■ If you are not sure whether the computer is off or in hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. To remove the hard drive: 1. Save your work. 2. Shut down the computer and close the display. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the computer. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. Drives 3-1
Drives
3–1
3
Hard drive
Replacing the hard drive
Ä
CAUTION:
To prevent system lockup and loss of information:
■
Shut down the computer before removing the hard drive from the
hard drive bay. Do not remove the hard drive while the computer is
on, in standby, or in hibernation.
■
If you are not sure whether the computer is off or in hibernation,
turn the computer on by pressing the power button. Then shut down
the computer through the operating system.
To remove the hard drive:
1. Save your work.
2. Shut down the computer and close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the computer.
5. Turn the computer upside down on a flat surface.
6. Remove the battery from the computer.