HP P2000 HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a
HP P2000 Manual
View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP P2000 manual content summary:
- HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 1
best practices and procedural overview, and illustrated examples for attaching external 6Gb/s SAS storage enclosures to an HP BladeSystem c-Class enclosure. The BladeSystem solutions described in this guide include a BladeSystem c-Class enclosure with server blades, 6Gb/s SAS Smart Array controllers - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 3
30 P2000 G3 SAS MSA Array System Storage Management Utility 31 P2000 G3 MSA Array System Command Line Interface 32 HP Systems Insight Manager...33 MSL Tape Libraries and 1/8 G2 Tape Autoloader remote management interface 34 HP MSL Tape Libraries and 1/8 G2 Tape Autoloader operator control panel - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 4
51 Troubleshooting the HP 6Gb SAS BL Switch 51 9 Deployment examples 52 Introduction...52 Device SAS port information...54 HP 6Gb SAS BL Switch port information 54 P2000 G3 SAS MSA Array controller enclosure port information 54 P2000 drive enclosure port information 55 D2700 disk enclosure port - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 5
Server and P711m/P712m controller worksheet 67 HP 3Gb SAS BL Switch worksheet 68 HP P2000 G3 SAS MSA Array controller enclosure worksheet 69 HP P2000 drive enclosure worksheets 70 HP D2700 storage enclosure worksheet 71 Tape and Autoloader worksheet 72 Index...73 Contents 5 - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 6
this guide • General descriptions and primary features of devices in a BladeSystem solution with external SAS storage enclosures • Links to essential installation, setup, and user instructions for each device • Information about high availability and performance • Information about different zoning - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 7
enclosures: • HP MSA System Racking Instructions • HP P2000 G3 MSA Systems Installation Instructions • HP P2000 G3 MSA Systems Cable Configuration Guide • HP P2000 G3 SAS MSA System User Guide • HP P2000 G3 MSA System SMU Reference Guide • HP P2000 G3 MSA System CLI Reference Guide • HP P2000 G3 MSA - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 8
on HP Smart Array Controllers Reference Guide • HP P2000 G3 MSA System SMU Reference Guide • HP P2000 G3 MSA System CLI Reference Guide How to obtain detailed information For detailed installation, configuration, use, and reference information about the HP BladeSystem enclosure and its supported - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 9
referenced in this guide. See "Documents referred to in this guide" (page 7). • Review the QuickSpecs for the Smart Array SAS controller, SAS blade switch, and SAS storage enclosures to make sure that your planned configuration, including number of servers, is supported. • Identify all of - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 10
the following solution devices: • "HP BladeSystem c-Class Enclosures" (page 10) • "HP BladeSystem c-Class Server Blades" (page 13) • "HP Smart Array P711m/P712m SAS Controller" (page 15) • "HP 6Gb SAS BL Switch" (page 17) • "HP P2000 G3 SAS MSA Array" (page 19) • "HP MSL2024, MSL4048, and MSL8096 - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 11
: • HP BladeSystem c3000 Enclosure Setup and Installation Guide-Includes detailed hardware description, installation, and user information • HP BladeSystem Onboard Administrator User Guide-Includes information on using Onboard Administrator. • HP BladeSystem c-Class Enclosure Troubleshooting Guide - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 12
: • HP BladeSystem c7000 Enclosure Setup and Installation Guide-Includes detailed hardware description, installation, and user information • HP BladeSystem Onboard Administrator User Guide-Includes information on using Onboard Administrator. • HP BladeSystem c-Class Enclosure Troubleshooting Guide - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 13
blades to your environment. HP BladeSystem c-Class enclosures support server blade models that are built in standardized form factors, referred to as half-height BladeSystem enclosure: • HP ProLiant Server Blade Installation Instructions-Includes physical installation instructions. • HP BladeSystem - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 14
blades, see the following documents, available on HP websites: • HP ProLiant Server Blade User Guide-Includes detailed hardware description and user information Important tips • Compatibility dependencies exist among components. See the QuickSpecs for your existing or potential components to confirm - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 15
features of the P711m (high-end controller): • External shared SAS storage enclosures, such as the P2000 G3 SAS MSA are supported. • Up to four HP 6Gb SAS BL Switches are supported. • 72-bit, 1GB Flash-Based Write Cache (FBWC). • Four external SAS ports: ◦ Each SAS port consists of two 2x SAS links - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 16
, ADU, and Storage Event Notification Service. P2000 G3 SAS MSA Array enclosures use MSA-specific storage management software. For more information about the MSA, see "HP P2000 G3 SAS MSA Array" (page 19). • The mezzanine slot in which you install the controller and the BladeSystem server device bay - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 17
specific tasks, such as creating and assigning zone groups and updating switch firmware. For more information about configuring and managing the switch using VSM, see Solution management tools. For more information Device website: http://www.hp.com/go/6gbsasbl BladeSystem Technical Resources website - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 18
and user information • HP 6G Virtual SAS Manager User Guide-Provides detailed information about and instructions on how to configure zone groups on the HP 6Gb SAS BL Switch to control access to external SAS storage enclosures. Important tips • The HP 6Gb SAS BL Switch is supported for use in - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 19
MSA controller enclosure, as long as the total number of drives in the array system does not exceed 149. • Although supported in other deployments, Solid State Drives (SSD) are not supported when the D2700 is connected behind the P2000 G3 SAS MSA in these BladeSystem solutions. HP P2000 G3 SAS MSA - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 20
I/O module or dual I/O module drive enclosure models. Configuration, management, and monitoring tasks are performed using the Storage Management Utility (SMU) or Command Line Interface (CLI), both of which are embedded in MSA2000-family array controller firmware. For more information about these - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 21
and instructions how to configure arrays and LUNs on P2000 G3 MSA Arrays and drive enclosures. • HP P2000 G3 MSA System Event Descriptions Reference Guide • HP MSA System MPIO DSM Installation Guide Important tips • If needed, upgrade the P2000 G3 SAS MSA controllers to the latest firmware version - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 22
SMU, see "Managing Host Access to Volumes" in the HP P2000 G3 MSA System SMU Reference Guide. ◦ For information about mapping volumes using the CLI, see the "Map volume" section in the HP P2000 G3 MSA System CLI Reference Guide. • When mapping, be sure to choose all P2000 G3 SAS MSA controller ports - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 23
and its installation and configuration procedures. • HP MSL2024, MSL4048, and MSL8096 Tape Libraries user and service guide and HP 1/8 G2 Tape Autoloader user and service guide-Includes detailed hardware reference, maintenance, and service information. Important tips • Switch-port zone groups must - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 24
• Each SAS tape drive has a single SAS port. Redundancy is not supported, so the host end of the fanout cable will be connected to only one port on one SAS BL switch. Either SAS BL switch in the BladeSystem c-Class enclosure may be used. The corresponding switch port on the other SAS BL switch may - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 25
software, enabling optimal deployment of HP servers and storage, and smarter control over power, cooling and access. For more information For additional information see the following HP websites: HP Infrastructure products website: http://h18004.www1.hp.com/products/servers/platforms/ rackandpower - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 26
Utility" (page 31) • "P2000 G3 MSA Array System Command Line Interface" (page 32) • "HP Systems Insight Manager" (page 33) • "MSL Tape Libraries and 1/8 G2 Tape Autoloader remote management interface" (page 34) • "HP MSL Tape Libraries and 1/8 G2 Tape Autoloader operator control panel" (page 35) 26 - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 27
allows for run-time management and configuration of the enclosure components, and informs you of problems within the enclosure through e-mail, SNMP, or the Insight Display For more Information about using OA, see the HP BladeSystem Onboard Administrator User Guide. Onboard Administrator can be used - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 28
for the selected device. For example, when a SAS BL Switch installed in interconnect bay 5 is selected in the navigation tree, additional light • Open the Management Console (HP Virtual SAS Manager) • Open the Port Mapping window to view detailed port mapping information 28 Software information - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 29
/P712m ports or device mappings, expand the navigation tree for a SAS BL Switch and then click Port Mapping. For the selected switch, the display shows each port of the switch, the server blade it is mapped to, and the WWN of the P711m/P712m mezzanine port. To determine installed firmware versions - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 30
• Assign zone groups to servers • Reset the switch • Update firmware For information on the VSM, see its online help and the HP 6G Virtual SAS Manager User Guide, available on the HP 6Gb SAS BL Switch page of the HP Manuals website http://www.hp.com/ support/manuals. The following image shows an - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 31
the IP address of the P2000 G3 MSA Array Controller management port. Through the SMU, you can manage the following physical and logical storage components: controller enclosures, drive enclosures, P2000 G3 MSA Array controllers, power-and-cooling modules, hard drives, virtual disks (vdisks), volumes - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 32
on a management host connected through a LAN to the Ethernet port on the P2000 G3 MSA Array controller. For more information about using the CLI, see the HP P2000 G3 MSA System CLI Reference Guide. The following image shows a CLI display for the show vdisks and show volumes command. 32 Software - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 33
selected storage. HP recommends using HP SIM to monitor the performance of your systems. NOTE: You must install and use SIM to benefit from the Pre-Failure Warranty for processors, SAS, SCSI, and SATA hard drives, and memory modules. Key SIM benefits include: • System discovery and identification - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 34
downloading firmware via a USB flash drive. Before using the RMI, you must configure the device's network and set the administrator password with the operator control panel (OCP). TIP: Check the Help screens in the RMI for additional information. The help pages are updated with most firmware updates - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 35
, you can monitor, configure, and operate most Library or Autoloader functions from the front panel. Use the control buttons to scroll through the menu. For more information about the OCP, see the HP MSL2024, MSL4048, and MSL8096 Tape Library user and service guide or the HP 1/8 G2 Tape Autoloader - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 36
a user-selected level of performance and fault tolerance. For more information about RAID levels and configuring the P2000 G3 SAS MSA Array storage, see the HP MSA2000 G1, MSA 2000 G2, and P2000 G3 MSA Best Practices white paper at http://www.hp.com/go/P2000 (under Resource Library). Although - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 37
determines the BladeSystem interconnect bay in which you must install the SAS switches, because each mezzanine slot maps to a specific interconnect device bay in the BladeSystem c-Class enclosure. Tables in this section show the mapping relationship between solution devices: • BladeSystem c-Class - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 38
bays assigned this type of zone group have access to the controller enclosures or tape devices connected to the ports included in the zone. Tape environments and shared storage environments such as those using the P2000 G3 SAS MSA use switch port zoning. All tape drives in a tape device will be - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 39
(under the Installing tab) • P2000 G3 SAS MSA Array website: http://www.hp.com/go/P2000 (under HP Support & Drivers > Manuals • Tape Storage & Media website: http://www.hp.com/go/tape (under Business Class Libraries or Tape Autoloaders) NOTE: While installing this solution, record device and system - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 40
the storage enclosure as a boot device), install the operating system. Install P2000 G3 SAS MSA Array controller and drive enclosures. If necessary, update the firmware. Configure zoning on the switch. Configure the P2000 G3 SAS MSA Array controllers and storage. 40 Installation best practices and - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 41
, update the firmware on the switch with the passive VSM. P2000 G3 SAS MSA Array System controller and drive enclosure: • You can specify a nickname (host name) for the SAS WWN to be able to easily identify the host in the host list. See "Adding a host" in the HP P2000 G3 MSA System SMU Reference - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 42
up for the first time, the Insight Display launches an installation wizard to guide you through the configuration process. After configuring the BladeSystem enclosure, the Insight Display verifies that there are no installation or configuration errors. 42 Installation best practices and procedures - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 43
P2000 G3 SAS MSA Array controller enclosures and drive enclosures. If not included in your solution, proceed to the next step. For detailed instructions on installing MSA storage enclosures, see "Installing the enclosures" in the HP P2000 G3 MSA System SAS User Guide. a. Before installing each MSA - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 44
"HP P2000 G3 SAS MSA Array controller enclosure worksheet" (page 69). This IP address is used when accessing the Storage Management Utility (SMU) or Command Line Interface (CLI) to configure the MSA. For information, see "Obtaining IP values" in the HP P2000 G3 MSA System SAS User Guide. b. Obtain - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 45
ID" on the Switch Port Mapping page in Onboard Administrator. (HP Onboard Administrator user guide) c. Enter P2000 G3 SAS MSA Array system parameters. ("Configuring the system" in the HP P2000 G3 MSA System SMU Reference Guide) d. Create vdisks and volumes using the SMU or CLI. For information, see - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 46
(page 47) • "Updating firmware on P2000 G3 SAS MSA controller and drive enclosures" (page 50) Updating firmware on BladeSystem components and devices Available as a download from the BladeSystem Firmware Maintenance website, use the HP Smart Update Firmware DVD ISO to simplify updating firmware and - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 47
"VSM Command Line Interface" section of the HP Virtual SAS Manager User Guide, available on the HP 6Gb SAS BL Switch page of the HP Manuals website http://www.hp.com/support/manuals. • Regardless of firmware updating method, firmware updates must be performed during a scheduled maintenance window - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 48
Internet files from the browser cache. 12. Log back in to VSM and confirm that the firmware installed successfully with no issues. 13. Close the maintenance window by doing the following: a. Restart storage enclosures. b. Restart server blades. c. Restart I/O. 48 Maintenance and troubleshooting - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 49
about updating HP 6Gb SAS BL Switch firmware using the VSM GUI or CLI, see the HP 6G Virtual SAS Manager User Guide IMPORTANT: A service maintenance window must be opened when updating switch firmware. 1. Obtain the latest HP 6Gb SAS BL Switch firmware file from the HP Support Downloads page - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 50
• In dual-controller configurations, either schedule a maintenance window or perform during times of low I/O. For information about updating firmware using the SMU, see HP P2000 G3 MSA System SMU Reference Guide or the HP P2000 G3 MSA System CLI Reference Guide. 50 Maintenance and troubleshooting - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 51
the problem. • See the HP 6Gb SAS BL Switch User Guide for LED definitions. Verify the power up sequence and allow sufficient time for each component to power up. Verify cabling from the switch to the storage enclosures. For more information about power-up sequence, see "Installation best practices - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 52
port information" (page 54) • "Illustrated configuration examples" (page 56) Introduction Examples in this section illustrate a few of the supported deployments when connecting external SAS storage enclosures to the c-Class BladeSystem enclosure the HP 6Gb SAS BL Switches to the storage enclosures. - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 53
G3 SAS MSA Array. Two controllers are installed in P2000 G3 SAS MSA Array controller enclosures, providing an alternate path between the switches and the P2000 G3 SAS MSA Array. A single cable is connected between the Two cables are connected between the switch and the storage enclosure. If ports - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 54
and tape devices. P2000 G3 SAS MSA Array controller enclosure port information As shown in the following illustration: • SAS host ports: Four per controller. Labeled SAS 1, SAS 2, SAS 3, and SAS 4. Use these SAS host ports to connect to the hosts (switch). When two controllers are installed in the - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 55
P2000 drive enclosure port information P2000 drive enclosures are supported for use in P2000 G3 SAS MSA Array environments. As shown in the following illustration: • SAS In port: One per I/O module. Labelled IN. Use this SAS expansion port to connect to a P2000 G3 SAS controller enclosure or to a - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 56
cabling" (page 58) • "Shared storage-P2000 G3 SAS MSA dual-controller, dual-domain, standard cabling" (page 59) • "Shared storage-P2000 G3 SAS MSA dual-controller, dual-domain, optimal cabling" (page 60) • "Shared storage-P2000 G3 SAS MSA with cascaded drive enclosures" (page 61) • "Tape library - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 57
MSA controller enclosures: 1 P2000 drive enclosures: 0 BladeSystem c7000 enclosures: 1 SAS BL Switches: 1 Server blade types: half-height and full-height Connection details • Switch in interconnect bay 5: ◦ Port 1: to P2000 G3 SAS MSA port A1 Notes • If additional ports on the MSA controllers or HP - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 58
P2000 G3 SAS MSA controller enclosures: 1 P2000 drive enclosures: 0 BladeSystem c7000 enclosures: 1 SAS BL Switches: 1 Server blade types: half-height and full-height Connection details • Switch in interconnect bay 5: ◦ Port 1: to P2000 G3 SAS MSA port A1 ◦ Port 2: to P2000 G3 SAS MSA port - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 59
G3 SAS MSA controller enclosures: 1 P2000 drive enclosures: 0 BladeSystem c7000 enclosures: 1 SAS BL Switches: 2 Server blade types: half-height and full-height Connection details • Switch in interconnect bay 5: ◦ Port 1: to MSA SAS port A1 • Switch in interconnect bay 6: ◦ Port 1: to MSA SAS port - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 60
zone group. Devices and quantities P2000 G3 SAS MSA controller enclosures: 1 P2000 drive enclosures: 0 BladeSystem c7000 enclosures: 1 SAS BL Switches: 2 Server blade types: half-height and full-height Connection details • Switch in interconnect bay 5: ◦ Port 1: to MSA SAS port A1 ◦ Port 2: to MSA - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 61
seven P2000 drive enclosures can cascade behind a P2000 G3 SAS MSA controller enclosure, as long as the total number of drives in the array system does not exceed 96. • When connecting the Small Form Factor D2700 disk enclosure, up to five D2700 drive enclosures can cascade behind a P2000 G3 SAS MSA - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 62
G3 SAS MSA controller enclosures: 1 P2000 drive enclosures: 4 BladeSystem c7000 enclosures: 1 SAS BL Switches: 2 Server blade types: half-height and full-height MSL4048 Tape Library with four SAS Ultrium tape drives: 1 Connection details • Switch in interconnect bay 5: ◦ Port 1: to MSA SAS port - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 63
system type and revision level • Detailed questions HP websites For additional information, see the following HP websites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/service_locator • http://www.hp.com/support/manuals • http://www.hp.com/support/downloads • http://www.hp - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 64
become unstable if more than one component is extended. Customer self repair HP customer self repair (CSR) programs allow you to repair your product. If a CSR part needs replacing, HP ships the part directly to you so that you can install it at your convenience. Some 64 Support and other resources - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 65
proactive service support for nearly all HP servers, storage, network, and SAN environments, plus selected non-HP servers that have a support obligation with HP. It is integrated with HP Systems Insight Manager. A dedicated server is recommended to host both HP Systems Insight Manager and HP Insight - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 66
68) • "HP P2000 G3 SAS MSA Array controller enclosure worksheet" (page 69) • "HP P2000 drive enclosure worksheets" (page 70) • "Tape and Autoloader worksheet" (page 72) NOTE: Device and system information recorded in these worksheets is used when initially installing and configuring the solution - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 67
: Serial number: Server name: OS version/service pack: Installed in enclosure device bay number: Onboard Administrator IP address: Mezzanine slot used by P711/712: P711m/P712m serial number P711m/P712m firmware version (must be the same on all controllers): P711m/P712m WWN Accessing switch in - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 68
HP 3Gb SAS BL Switch worksheet IMPORTANT: Multi-path configurations need two switches. Model: 6Gb SAS BL Switch Serial number: Switch name: Firmware version (must be the same on all switches): Installed in enclosure interconnect bay number: Model: 6Gb SAS BL Switch Serial number: Switch name: - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 69
1 WWN: Controller A, Port 2 WWN: Controller A, Port 3 WWN: Controller A, Port 4 WWN: Controller B Management port IP address: Controller B, Port 1 WWN: Controller B, Port 2 WWN: Controller B, Port 3 WWN: Controller B, Port 4 WWN: SMU login information: HP P2000 G3 SAS MSA Array controller enclosure - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 70
HP P2000 drive enclosure worksheets Model: P2000 drive enclosure Chassis serial number: Device name: Enclosure firmware version: Hard drive type and size: Model: P2000 drive enclosure Chassis serial number: Device name: Enclosure firmware version: Hard drive type and size: Model: P2000 drive - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 71
HP D2700 storage enclosure worksheet Model: D2700 disk enclosure Chassis serial number: Device name: Firmware version (must be the same on all I/O modules): I/O module 1 WWID: I/O module 2 WWID: Hard drive types and sizes: Model: D2700 disk enclosure Chassis serial number: Device name: Firmware - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 72
Tape and Autoloader worksheet Model: Chassis serial number: Device name: Firmware version: 72 Device worksheets - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 73
best practices, 41 BladeSystem best practices, 41 key steps of, 40 overview, 39 P2000 G3 SAS MSA best practices, 41 P700m best practices, 41 steps of, 42 M management tools Command Line Interface (CLI), 32 Onboard Administrator (OA), 27 Storage Management Utility (SMU), 31 supported, 26 Systems - HP P2000 | HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 74
P P2000 drive enclosure worksheets, 70 P2000 G3 information about, 19 reference documents, 7 worksheets, 69 P2000 G3 controller enclosure port information, 54 P2000 G3 drive enclosure port information, 55 P2000 G3 SAS MSA installation best practices, 41 P700m installation best practices, 41 P711m/
HP BladeSystem
Deployment Guide for Solutions with 6Gb
SAS BL Switches and External SAS Storage
Enclosures
Abstract
This document provides device overview information, installation best practices and procedural overview, and illustrated
examples for attaching external 6Gb/s SAS storage enclosures to an HP BladeSystem c-Class enclosure. The BladeSystem
solutions described in this guide include a BladeSystem c-Class enclosure with server blades, 6Gb/s SAS Smart Array controllers,
6Gb/s SAS switch blades, and 6Gb/s SAS external storage enclosures.
HP Part Number: 634041-001
Published: April 2011
Edition: First