HP PageWide Managed P75050 Air Flow Repair Kit Install Guide - Page 4
then lift it up to remove it callout 2.
 |
View all HP PageWide Managed P75050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
2 Remove the rear cover (PW765/780/785) 2.1 Remove four screws.. NOTE: These screws require a #20 TORX driver. 2.2 Open the right- and left-side rear access covers. 2.3 Remove the rear cover (PW750/772/777) 2.1 Open the right door, and then use a small flat-blade screwdriver to carefully push in against the latch to release it. 2.2 1 2 Rotate the top of the cover away from the printer (callout 1), and then lift it up to remove it (callout 2). Push in on the right- (shown) and left-side rear cover latches. 2.4 1 2 Rotate the top of the cover away from the printer (callout 1), and then lift it up to remove it (callout 2). 4
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
 |
 |
2.3
2.4
2.2
2.2
2.1
2.1
Remove four screws..
NOTE
: These screws require a #20 TORX driver.
Open the right door, and then use a small flat-blade screwdriver to carefully
push in against the latch to release it.
Open the right- and left-side rear access covers.
Rotate the top of the cover away from the printer (callout 1), and
then lift it up to remove it (callout 2).
Push in on the right- (shown) and left-side rear cover latches.
Rotate the top of the cover away from the printer (callout 1), and then lift it up
to remove it (callout
2).
1
2
1
2
4
2
Remove the rear cover (PW765/780/785)
Remove the rear cover (PW750/772/777)