HP Pavilion 10 TouchSmart 10z-f100 HP Pavilion 10 Notebook PC Maintenance and - Page 41
CAUTION, Display assembly, steps below.
View all HP Pavilion 10 TouchSmart 10z-f100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3. Open the computer as far as possible and turn the computer on its side. Remove the two Phillips 2.5×5.0 screws (1), and (2) from the display hinges. 4. Slide the display assembly (3) to remove it. CAUTION: When installing the display assembly, be sure that the wireless antenna cables are routed and arranged properly. Failure to properly route the antennas can result in degradation of the computer's wireless performance. 5. Replace the panel if this is a whole unit touchscreen replacement by reversing these procedures. The whole unit panel replacement is complete. NOTE: If you are replacing an assembly component for a non-touchscreen display, continue the steps below. Display assembly Remove the display assembly: 1. Place the computer upright and open as far as possible. 2. Remove the display screw covers (1) and remove the two Phillips 2.5×2.5 screws (2). Component replacement procedures 31