HP Pavilion 13-a100 Pavilion x360 Convertible PC Maintenance and Service Guide - Page 37

Hard drive, Disconnect the battery cable from the system board see

Get HP Pavilion 13-a100 PDF manuals and user guides View all HP Pavilion 13-a100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Hard drive NOTE: The hard drive spare kit does not include the hard drive bracket or hard drive connector adapter. The hard drive bracket and hard drive connector adapter are included in the Hard Drive Hardware Kit, spare part number 768020-001. Description 1-TB, 5400-rpm 750-GB, 5400-rpm 500-GB, 5400-rpm 500-GB, 5400-rpm, Hybrid 8-GB Spare part number 762990-005 752099-005 683802-006 732000-005 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 26). 5. Disconnect the battery cable from the system board (see Battery on page 30). Remove the hard drive: 1. Release the ZIF connector (1) to which the hard drive cable is attached, and then disconnect the hard drive cable from the system board. 2. Remove the two PM2.4×3.8 screws (2) that secure the hard drive to the bottom cover. 3. Remove the hard drive (3). Hard drive 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
Hard drive
NOTE:
The hard drive spare kit does not include the hard drive bracket or hard drive connector adapter. The
hard drive bracket and hard drive connector adapter are included in the Hard Drive Hardware Kit, spare part
number 768020-001.
Description
Spare part number
1-TB, 5400-rpm
762990-005
750-GB, 5400-rpm
752099-005
500-GB, 5400-rpm
683802-006
500-GB, 5400-rpm, Hybrid 8-GB
732000-005
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
26
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
30
).
Remove the hard drive:
1.
Release the ZIF connector
(1)
to which the hard drive cable is attached, and then disconnect the hard
drive cable from the system board.
2.
Remove the two PM2.4×3.8 screws
(2)
that secure the hard drive to the bottom cover.
3.
Remove the hard drive
(3)
.
Hard drive
31