HP Pavilion TouchSmart 11-e015dx HP Pavilion TouchSmart 11 Notebook PC - Maint - Page 40
Remove the Phillips PM2.0×3.5 screw, The WLAN module tilts up.
View all HP Pavilion TouchSmart 11-e015dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled "1". The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2". 2. Remove the Phillips PM2.0×3.5 screw (2) that secures the WLAN module to the system board. (The WLAN module tilts up.) 3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: If the WLAN antenna cables are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. 32 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts